UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2011

OR

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from

to

Commission File Number: 001-34756

Tesla Motors, Inc.

(Exact name of registrant as specified in its charter)

Delaware

91-2197729

(State or other jurisdiction of

incorporation or organization)

(I.R.S. Employer

Identification No.)

3500 Deer Creek Road

Palo Alto, California

94304

(Address of principal executive offices)

(Zip Code)

(650) 681-5000

(Registrant s telephone number, including area code)

Securities

registered pursuant to Section 12(b) of the Act:

Title of each class

Name of each exchange on which registered

Common Stock, $0.001 par value

The NASDAQ Stock Market LLC

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities

Act. Yes No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the

Act. Yes No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the

Securities Exchange Act of 1934 ( Exchange Act ) during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90

days. Yes No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive

Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K ( 229.405 of this chapter) is not contained herein, and will not be contained, to the best of

registrant s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller

reporting company. See the definitions of large accelerated filer, accelerated filer, and smaller reporting company in Rule 12b-2 of the Exchange Act:

Large accelerated filer

Accelerated filer

Non-accelerated filer

(Do not check if a smaller reporting company)

Smaller reporting company

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange

Act). Yes No

The aggregate market value of voting stock held by non-affiliates of the registrant, as of June 30, 2011, the last day of

registrant s most recently completed second fiscal quarter, was $1,854,208,453 (based on the closing price for shares of the registrant s Common Stock as reported by the NASDAQ Global Select Market on June 30, 2011). Shares of Common

Stock held by each executive officer, director, and holder of 5% or more of the outstanding Common Stock have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive

determination for other purposes.

As of January 31, 2012, there were 104,604,044 shares of the registrant s Common

Stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant s Proxy Statement for the 2012 Annual Meeting of Stockholders are incorporated herein by reference in Part

III of this Annual Report on Form 10-K to the extent stated herein. Such proxy statement will be filed with the Securities and Exchange Commission within 120 days of the registrant s fiscal year ended December 31, 2011.

Table of Contents

TESLA MOTORS, INC.

ANNUAL REPORT ON FORM 10-K FOR THE YEAR ENDED DECEMBER 31, 2011

INDEX

Page

PART I.

Item 1.

Business

Item 1A.

Risk Factors

27

Item 1B.

Unresolved Staff Comments

66

Item 2.

Properties

66

Item 3.

Legal Proceedings

67

PART II.

Item 5.

Market for Registrant s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

68

Item 6.

Selected Financial Data

71

Item 7.

Management s Discussion and Analysis of Financial Condition and Results of Operations

73

Item 7A.

Quantitative and Qualitative Disclosures About Market Risk

100

Item 8.

Financial Statements and Supplementary Data

101

Item 9.

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

138

Item 9A.

Controls and Procedures

138

Item 9B.

Other Information

138

PART III.

Item 10.

Directors, Executive Officers and Corporate Governance

139

Item 11.

Executive Compensation

139

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

139

Item 13.

Certain Relationships and Related Transactions, and Director Independence

139

Item 14.

Principal Accountant Fees and Services

139

PART IV.

Item 15.

Exhibits and Financial Statement Schedules

139

Signatures

149

Table of Contents

Forward-Looking Statements

The discussions in this Annual Report on Form 10-K contain forward-looking statements reflecting our current expectations that involve

risks and uncertainties. These forward-looking statements include, but are not limited to, statements concerning our strategy, future operations, future financial position, future revenues, projected costs, expectations regarding demand and

acceptance for our technologies, growth opportunities and trends in the market in which we operate, prospects and plans and objectives of management. The words anticipates , believes , estimates ,

expects , intends , may , plans , projects , will , would and similar expressions are intended to identify forward-looking statements, although not all forward-looking

statements contain these identifying words. We may not actually achieve the plans, intentions or expectations disclosed in our forward-looking statements and you should not place undue reliance on our forward-looking statements. Actual results or

events could differ materially from the plans, intentions and expectations disclosed in the forward-looking statements that we make. These forward-looking statements involve risks and uncertainties that could cause our actual results to differ

materially from those in the forward-looking statements, including, without limitation, the risks set forth in Part I, Item 1A, Risk Factors in this Annual Report on Form 10-K and in our other filings with the Securities

and Exchange Commission. We do not assume any obligation to update any forward-looking statements.

Table of Contents

PART I

ITEM 1.

BUSINESS

We design,

develop, manufacture and sell high-performance fully electric vehicles and advanced electric vehicle powertrain components. We own our sales and service network and have operationally structured our business in a manner that we believe will enable

us to rapidly develop and launch advanced electric vehicles and technologies. We believe our vehicles, electric vehicle engineering expertise, and operational structure differentiates us from incumbent automobile manufacturers.

We are the first company to commercially produce a federally-compliant electric vehicle, the Tesla Roadster, which achieves a

market-leading range on a single charge combined with attractive design, driving performance and zero tailpipe emissions. Our Tesla Roadster offers impressive acceleration and performance without producing any tailpipe emissions. The Tesla

Roadster s proprietary electric vehicle powertrain system is the foundation of our business and, with design enhancements, will also form the basis for our Model S sedan, our Model X crossover, as well as future vehicles.

Model S is in an advanced stage of development and is currently scheduled to commence customer deliveries by July 2012. We expect that

Model S will be manufactured with an adaptable platform architecture upon which other future vehicles, including our Model X crossover, will be based. We revealed a prototype of the Model X crossover in February 2012. We plan to start Model X

production in late 2013 and ramp up to significant customer deliveries in early 2014. This unique vehicle has been designed to fill the niche between the roominess of a minivan and the style of an SUV, while having high performance features such as

a dual motor all-wheel drive system.

In addition to developing our own vehicles, we provide services for the development of

electric powertrain components and sell electric powertrain components to other automotive manufacturers. We have provided development services and powertrain components to Daimler AG (Daimler) for its Smart fortwo and A-Class electric vehicles. We

recently announced the receipt of an initial purchase order for the development of a full powertrain system for an additional Mercedes Benz vehicle from Daimler. We also have almost completed a development services program to produce a full electric

powertrain system for Toyota Motor Corporation (Toyota) for use in its RAV4 EV. We anticipate beginning to ship these systems to Toyota during the first half of 2012 under our supply and services agreement.

The commercial production of a highway capable, fully electric vehicle that meets consumers range and performance expectations

requires substantial design, engineering, and integration work on almost every system of our vehicles. Our roots in Silicon Valley have enabled us to recruit engineers with strong skills in electrical engineering, power electronics and software

engineering. We have complemented this talent base with automotive engineers with substantial expertise in vehicle engineering and manufacturing. Our ability to combine expertise in electric powertrain and vehicle engineering provides a broad

capability in electric vehicle design and systems integration. We believe these capabilities, coupled with our focus solely on electric vehicle technology as well as our strong inhouse engineering and manufacturing capacity, will enable us to

sustain the electric vehicle industry leadership we created through the production of the Tesla Roadster.

We sell and service

our Tesla Roadster though our company-owned sales and service network in the North America, Europe and Asia. Our intent is to offer a compelling customer experience while gathering rapid customer feedback and achieving operating efficiencies, better

control over the costs of inventory, warranty service, pricing, and the development of the Tesla brand. Our Tesla stores do not carry large vehicle inventories and, as a result, do not require corresponding large floor spaces. We believe the

benefits we receive from distribution ownership, combined with our product design based on modularity and common platforms, will enable us to improve the speed of product development and improve the capital efficiency of our business. We believe

that this approach provides us with a competitive advantage as compared to incumbent automobile manufacturers.

Table of Contents

Our first vehicle, the Tesla Roadster, can accelerate from zero to 60 miles per hour in 3.9

seconds and has a maximum speed of approximately 120 miles per hour. The Roadster Sport version can accelerate from zero to 60 miles per hour in 3.7 seconds. The Tesla Roadster has a range of 245 miles on a single charge, as determined using the

United States Environmental Protection Agency s (EPA s), combined two-cycle city/highway test. The Tesla Roadster has a range that is almost double that of any other commercially released electric vehicle and reportedly set a new world

distance record of 313 miles on a single charge for a production electric car in a rally across Australia as part of the 2009 Global Green Challenge. As of December 31, 2011, we had delivered approximately 2,150 Tesla Roadsters to customers in

over 31 countries, almost all of which were sold in North America and Europe. We concluded the production run of the Tesla Roadster in January 2012. We are selling our remaining Tesla Roadsters primarily in Europe and Asia during 2012 until our

inventory is depleted. To date, our customers have driven the Tesla Roadster for an estimated aggregate of almost 20 million miles.

We announced our second electric vehicle, Model S, with the public exhibition of a drivable early prototype in March 2009. In October 2011 we invited over three thousand customers and other

stakeholders to see and ride in the beta prototypes of Model S at our manufacturing facility in Fremont, California, the Tesla Factory. We have completed the construction of several drivable Model S alpha and beta prototypes, which are currently

undergoing detailed testing. We currently plan to begin customer deliveries of Model S by July 2012.

Model S is a

four door, five-passenger premium sedan that offers exceptional performance, functionality and attractive styling. As a fully electric vehicle, Model S will produce zero tailpipe emissions while accelerating from zero to 60 miles per hour in a

targeted time of as low as 4.4 seconds in its performance version. The base Model S will have an effective base price of $49,900 in the United States with the 40 kilowatt-hour (kWh) battery pack option, assuming and after giving effect to the

continuation of a United States federal tax credit of $7,500 for the purchase of alternative fuel vehicles. Even without the tax credit, we believe the base list price will be competitive from a pricing perspective with other premium vehicles. We

believe that Model S will demonstrate our ability to produce increasingly affordable electric vehicles that offer long-range capabilities and uncompromised performance, energy efficiency, convenience and design.

We plan to offer Model S with a variety of battery pack options 40 kWh, 60 kWh and 85 kWh which we estimate will offer a range

on a single charge of 160 miles, 230 miles, and 300 miles, respectively, while traveling at a steady speed of 55 miles per hour. The EPA s new fuel economy requirements will require us to label Model S utilizing new and different energy

efficiency testing methodologies. These methodologies differ from the one we have used to estimate the range of the vehicles at a steady speed of 55 miles per hour and could reduce the range reported on the required labeling of our vehicles by up to

30% as compared to our current estimates.

We are designing Model S for a significantly broader customer base than the Tesla

Roadster. Accordingly, we currently intend to target an annual production rate of approximately 20,000 cars per year beginning in 2013 from our Tesla Factory. We currently plan to commence deliveries by July 2012 and to deliver approximately 5,000

Model S sedans in 2012. As of December 31, 2011, we had received over 8,000 customer reservations with a minimum refundable payment of $5,000.

We have nearly completed the Tesla Factory, our integrated electric vehicle manufacturing facility in Fremont, California for the manufacture of Model S and its components. In October 2010, we completed

the purchase of this facility from New United Motor Manufacturing, Inc. (NUMMI). We intend to use the facility for the production of our Model S vehicle, Model X crossover, and to build our future electric vehicles. We have entered into a loan

agreement with the United States Federal Financing Bank and United States Department of Energy (DOE Loan Facility), to arrange loans for up to $465.0 million, $363.9 million of which is intended for the continued development of Model S and

the build out of the Tesla Factory.

The electric powertrain we developed for the Tesla Roadster has provided the foundational

technology for our Model S, our Model X crossover and our future vehicles, and for electric powertrain components and systems

Table of Contents

that we are selling to Daimler and its affiliates and that we intend to sell to Toyota. Our electric powertrain consists of the following components: our modular battery pack, our power

electronics, gearbox, our motor and control and integration software which enables the components to operate as a system. We sell certain of these components to Daimler and intend to sell these systems to Toyota, and have secured $101.2 million

of an aggregate $465.0 million from our DOE Loan Facility to fund the infrastructure for these powertrain activities. We believe that our efforts in our powertrain development will enable us to advance our technology and rapidly and cost

effectively develop vehicles.

Our battery pack and electric powertrain system has enabled us to deliver market-leading range

capability on our vehicles at what we believe is a compelling battery cost per kilowatt-hour. The battery pack of the Tesla Roadster uses commercially available lithium-ion battery cells and contains 53 kilowatt-hours of usable energy, almost double

the energy of any other commercially available electric vehicle battery pack, thereby significantly increasing its range capability. Designing an electric powertrain and a vehicle to exploit its energy efficiency has required extensive safety

testing and innovation in battery packs, motors, powertrain systems and vehicle engineering. Our proprietary technology includes cooling systems, safety systems, charge balancing systems, battery engineering for vibration and environmental

durability, customized motor design and the software and electronics management systems necessary to manage battery and vehicle performance under demanding real-life driving conditions. These technology innovations have resulted in an extensive

intellectual property portfolio as of December 31, 2011, we had 59 issued patents and more than 230 pending patent applications with the United States Patent and Trademark Office and internationally in a broad range of areas.

We are designing our vehicles to enable the cost effective development of our future vehicles. For example, we are designing a common

platform architecture for Model S, which compactly positions the battery pack, motor and other elements of our powertrain within the frame of the vehicle. We believe this architecture will form the basis of several future vehicles, including our

planned Model X crossover, and enable us to efficiently and cost effectively launch these new vehicle models in the future.

Our design and vehicle engineering capabilities, combined with the technical advancements of our powertrain system, have enabled us to

design and develop zero tailpipe emission vehicles that we believe overcome the design, styling, and performance issues that we believe have historically limited broad consumer adoption of electric vehicles. As a result, we believe our Tesla

Roadster customers enjoy, and Model S customers will enjoy, several benefits, including:

Long Range and Recharging Flexibility. The range of the Tesla Roadster is almost double the range of any other commercially available electric

vehicle. We are designing Model S to offer an even greater range option. In addition, the Tesla Roadster incorporates our proprietary on-board charging system, permitting recharging from almost any available electrical outlet, and we are designing

certain battery pack versions of Model S to offer fast charging capability from our planned SuperCharger network. We believe the long-range and charging flexibility of our vehicles will help reduce consumer anxiety over range, alleviate the

need for expensive, large-scale charging infrastructure, and differentiate our vehicles as compared to our competitors currently announced electric vehicle product offerings.

Energy Efficiency and Cost of Ownership. We believe our Tesla Roadster offers and our Model S will offer consumers an attractive cost of

ownership when compared to similar internal combustion engine or hybrid electric vehicles. Using only a single electric powertrain enables us to create a lighter, more energy efficient vehicle that is mechanically simpler than currently available

hybrid or internal combustion engine vehicles. We also expect our electric vehicles will have lower relative maintenance costs than hybrid, plug-in hybrid, or internal combustion engine vehicles due to fewer moving parts and the absence of certain

components, including oil, oil filters, spark plugs and engine valves. Additionally, government incentives that are currently available can reduce the cost of ownership even further.

Table of Contents

High-Performance Without Compromised Design or Functionality. We believe we have been able to successfully overcome the design and performance

tradeoff issues that encumbered most early electric vehicle designs. We believe the Tesla Roadster delivers an unparalleled driving experience with instantaneous and sustained acceleration through an extended range of speed. In addition, our

Model S is being designed to seat five adults, provide best in class storage in the trunk and hood while offering design and performance comparable to, or better than, other premium sedans.

Our Vehicles and Products

We currently design, manufacture and sell fully electric vehicles and electric powertrain components.

The Tesla Roadster

Our first vehicle, the Tesla Roadster, is the first high-performance electric sports car. The two-seat, convertible Tesla Roadster has a combination of range, style, performance and energy efficiency that

we believe is unmatched in the market today. It can accelerate from zero to 60 miles per hour in 3.9 seconds and has a maximum speed of approximately 120 miles per hour. The Tesla Roadster also has a range of 245 miles on a single charge, as

determined using the United States EPA s, combined two-cycle city/highway test. This range is almost double that of any other commercially released electric vehicle.

As of December 31, 2011, we had delivered approximately 2,150 Tesla Roadsters to customers in over 31 countries, almost all of which were sold to customers in North America and Europe. The Tesla

Roadster complies with, or is exempt from, all applicable vehicle safety standards in the United States, the European Union as well as select other countries. To date, our customers have driven the Tesla Roadster for an estimated aggregate of almost

20 million miles. We concluded the production run of the Tesla Roadster in January 2012. We are selling our remaining Tesla Roadsters primarily in Europe and Asia during 2012 until our inventory is depleted.

The cumulative capital expenditures and research and development costs for the Tesla Roadster from our inception to the date we delivered

our first Tesla Roadster was approximately $125 million.

We have continued to rapidly develop the Tesla Roadster since its

introduction. In June 2009, nine months after its commercial introduction, we launched the Tesla Roadster 2, as well as a high-performance variant, the Tesla Roadster Sport. We delivered our first right-hand drive model of the Tesla Roadster in

January 2010 and have since delivered right-hand drive Roadsters into key markets such as the United Kingdom, Japan, Hong Kong, and Australia. In July 2010, we released the Roadster 2.5, an upgraded version of Roadster 2.

Model S

Our second vehicle, Model S, is currently expected to begin customer deliveries by July of 2012 and we currently plan to deliver approximately 5,000 Model S sedans in 2012. We are leveraging

technologies within the electric powertrain of the Tesla Roadster to create a four-door, five-adult-passenger sedan that produces zero tailpipe emissions while accelerating from zero to 60 miles per hour in a targeted time of as low as 4.4 seconds

in its performance version. Model S acceleration from zero to 60 miles per hour is targeted at 6.5 seconds, 5.9 seconds and 5.6 seconds for the 40 kWh, 60 kWh and 85 kWh battery pack options, respectively. We have

designed Model S to include a third row with two rear-facing child seats, subject to applicable safety regulations and requirements, allowing us to offer a seven passenger sedan. The drivable early prototype of Model S was exhibited to the public in

March 2009 and as of December 31, 2011, we had received over 8,000 customer reservations with a minimum refundable payment of $5,000.

We plan to offer Model S with a variety of battery pack options 40 kWh, 60 kWh and 85 kWh which we estimate will offer a range on a single charge of 160 miles, 230 miles, and 300 miles,

respectively, while traveling at a steady speed of 55 miles per hour. We expect that these options will allow customers to purchase an electric vehicle that best matches their personal driving needs. The EPA s new fuel economy requirements

Table of Contents

will require us to label Model S utilizing new and different energy efficiency testing methodologies. These methodologies differ from the one we have used to estimate the range of the vehicles at

a steady speed of 55 miles per hour and could reduce the range reported on the required labeling of our vehicles by up to 30% as compared to our current estimates.

To complement its range capabilities, we also are offering Model S with a package of recharging options. We are offering the capability to fast charge Model S vehicles equipped with either the 60 kWh or

85 kWh battery packs at one of Tesla s SuperCharger facilities, which we plan to start installing at selected locations in the United States in 2012. We anticipate that the fast charge capability will allow Model S owners to replenish 50% of

the battery pack in about 30 minutes. This feature would offer these drivers a rapid and convenient way to recharge their vehicles. In addition, we are designing Model S to incorporate a modular battery pack in the floor of the vehicle, enabling it

to be rapidly swapped out at a specialized commercial battery exchange facility that we anticipate may be available in the future.

We are designing Model S to offer a compelling combination of functionality, convenience and styling without compromising performance and energy efficiency. With the battery pack in the floor of the

vehicle and the motor and gearbox in line with the rear axle, we have designed Model S to provide best in class storage space of 36.8 cubic feet, including storage under both the tailgate and the hood. By way of comparison, this storage space

exceeds the approximately 14 cubic feet of storage available in the 2009 BMW 5 Series sedan and the approximately 21 cubic feet of storage available in the 2009 Lincoln Town Car. We are also planning to equip Model S with premium luxury

features, including a 17 inch touch screen driver interface, advanced wireless connectivity, such as 3G connectivity, and driver customization of the infotainment and climate control systems of the vehicle. We are designing Model S with the intent

to achieve a five star safety rating. We believe the intended combination of performance, styling, convenience and energy efficiency of Model S will help position it as a compelling alternative to other vehicles in the luxury and performance

segments.

We have announced that the 45 kWh, 60 kWh and 85 kWh battery pack options of Model S will have an effective

base price of $49,900, $59,900, and $69,900, respectively, in the United States, assuming and after giving effect to the continuation of a United States federal tax credit of $7,500 for the purchase of alternative fuel vehicles. Even without the tax

credit, we believe the base list price will be competitive with other premium vehicles. We have also announced a performance version of Model S. Equipped with the 85 kWh battery pack and a high performance drive inverter, we anticipate that the

Model S performance version will accelerate from zero to 60 miles per hour in 4.4 seconds. The effective base price of the Model S performance version is $84,900.

We anticipate that the initial units of Model S will be introduced with a Signature Series which will have an 85 kWh battery pack and include certain colors and interior options, some of which may not be

available in the general production of Model S. We also offer the Signature Series with a performance version. The effective base price of the Signature Series is $87,900 and the effective base price of the Signature Series performance version is

$97,900.

We are designing Model S to provide a lower cost of ownership as compared to other vehicles in its class. We

consider the purchase price, cost of fuel and the cost of maintenance over a six year ownership period in this calculation. We assume comparable residual values, warranties, insurance costs and promotions and assume that currently available consumer

incentives are still available at the time of a Model S purchase. In addition to the competitive pricing of Model S relative to other premium vehicles, we estimate that customers of electric vehicles will enjoy lower fuel costs. For example,

assuming an average of 12,000 miles driven per year, an average electricity cost of 11.0 cents per kilowatt-hour and an average gasoline price of $3.38 per gallon over the full ownership of the vehicle which were the average electricity cost and

gasoline price in the United States, respectively, for January 2012, and based on our estimate of the energy efficiency of Model S, we estimate that our Model S could have approximately $1,900 per year less in fuel costs than a comparable

premium internal combustion engine sedan. Furthermore, we expect Model S will have lower maintenance costs than comparable premium internal combustion engine sedans due to fewer moving parts and the absence of certain components, including oil, oil

filters, spark plugs and engine valves.

Table of Contents

Model X and Future Vehicle Roadmap

We expect that Model S will be manufactured with an adaptable platform architecture and common electric powertrain so that we can use the

platform of Model S to create future electric vehicle models. In particular, by designing our electric powertrain within the chassis to accommodate different vehicle body styles, we believe that we can save significant time in future vehicle

development. In addition, we believe our strategy of using commercially available battery cells will enable us to leverage improvements in cell chemistries and rapidly introduce planned vehicles with different range options. However, we may make

changes to the design of Model S, including changes that may make it more difficult to use the Model S platform for future vehicles.

In February 2012, we revealed an early prototype of the Model X crossover as the first vehicle we intend to develop by leveraging the Model S platform. This unique vehicle has been designed to fill the

niche between the roominess of a minivan and the style of an SUV, while having high performance features such as a dual motor all-wheel drive system. We currently plan to start production of Model X in the fourth quarter of 2013 and ramp up to

significant customer deliveries in early 2014. We anticipate that we will make Model X available with 60kWh and 85 kWh battery pack options, with pricing of each version similar to those of a comparably equipped Model S. We currently intend to

target an annual production rate of approximately 10,000 -15,000 cars per year from our Tesla Factory.

We have also publicly

announced our intent to develop a third generation electric vehicle to be produced at the Tesla Factory. We intend to offer this vehicle at a lower price point and expect to produce it at higher volumes than our Model S. We expect that this

vehicle will be produced a few years after the introduction of the Model X crossover.

Powertrain Development and

Sales

In addition to our own vehicles, we also design, develop, manufacture and sell advanced electric vehicle

powertrain components.

In May 2009, we entered into a development agreement with Daimler under which we performed specified

research and development services for the development of a battery pack and charger for Daimler s Smart fortwo electric drive. All development work related to the development agreement had been completed as of December 31, 2009. Through

December 2011, we had sold over 2,100 battery packs and chargers for the Smart fortwo electric drive program.

In the first

quarter of 2010, Daimler engaged us to assist with the development and production of a battery pack and charger for a pilot fleet of its A-Class electric vehicles to be introduced in Europe during 2011. A formal agreement for this arrangement was

entered into with Daimler in May 2010. In October 2010, we completed the development of the A-Class battery pack and charger and began shipping production components for a demonstration fleet in February 2011. Through December 2011, we had sold over

500 battery packs and chargers for the A-Class EV program.

In the first quarter of 2010, we completed the development and

sale of modular battery packs for electric delivery vans for Freightliner Custom Chassis Corporation (Freightliner), an affiliate of Daimler. Freightliner plans to use these electric vans in a limited number of customer trials.

In May 2010, we and Toyota announced our intention to cooperate on the development of electric vehicles, and for us to receive

Toyota s support with sourcing parts and production and engineering expertise for Model S. In July 2010, we entered into an early phase agreement to develop an electric powertrain for the Toyota RAV4. With an aim by Toyota to market the

electric vehicle in the United States in 2012, prototypes would be made by combining the Toyota RAV4 model with a Tesla electric powertrain. We began developing and delivering prototypes to Toyota for evaluation in September 2010. In October 2010,

we entered into a contract services

Table of Contents

agreement with Toyota for the development of a validated powertrain system, including a battery, power electronics module, motor, gearbox and associated software, which will be integrated into an

electric vehicle version of the Toyota RAV4. Pursuant to our agreements, Toyota would pay us up to $69 million for the anticipated development services to be provided by us over the expected term of our performance. We expect to complete all of the

development services for the RAV4 EV in the first quarter of 2012.

Additionally, in July 2011, we entered into an agreement

to supply Toyota with an electric powertrain system for the RAV4 EV. We plan to begin delivery of these systems to Toyota for installation into the Toyota RAV4 EV in the first half of 2012. Our production activities under this program are expected

to continue through 2014

In February 2012, we received an initial purchase order for the development of a full electric

powertrain system for an additional Mercedes vehicle from Daimler. We are negotiating the agreement for production parts for this project; however, no agreement has yet been executed and there are no assurances that we will be able to enter into any

such agreement.

We are continuing to develop our electric powertrain component and systems activities and have secured a

$101.2 million loan under our DOE Loan Facility for the expansion of our engineering and production capability for these activities in our Palo Alto facility. This facility, which also serves as our corporate headquarters, houses our research

and development services, including cell and component testing and prototyping, as well as manufacturing of powertrain components for sales to third parties.

Technology

We believe the core competencies of our company are powertrain

and vehicle engineering. Our core intellectual property is contained within our electric powertrain. Our electric powertrain consists of the following: battery pack, power electronics, motor, gearbox and the control software which enables the

components to operate as a system. We designed each of these major elements for our Tesla Roadster and plan to use much of this technology in Model S, Model X, our future electric vehicles and powertrain components that we build for other

manufacturers. Our powertrain and battery pack have a modular design, enabling future generations of electric vehicles to incorporate a significant amount of this technology. Further, our powertrain is very compact and contains far fewer moving

parts than the internal combustion powertrain. These features enable us to adapt it for a variety of applications, including our future vehicles and any powertrain components we build for other manufacturers.

Battery Pack

We design our battery packs to safely store significant amounts of energy and to have long lives. For example, we have designed our Tesla Roadster battery packs to store 53 kilowatt hours of useful energy

and to have a life of over 100,000 miles or seven years. In addition, we have designed our battery packs to be modular so that we can leverage technology developments across our different vehicles and products. Our proprietary technology includes

cooling systems, safety systems, charge balancing systems, battery engineering for vibration and environmental durability, robotic manufacturing processes, customized motor design and the software and electronics management systems necessary to

manage battery and vehicle performance under demanding real-life driving conditions. We have significant experience and expertise in the safety and management systems needed to work with lithium-ion cells in the demanding automotive environment. We

believe these advancements have enabled us to produce a battery pack at a low cost per kilowatt-hour.

We believe one of our

core competencies is the design of our complete battery pack system. We have designed our battery pack system to permit flexibility with respect to battery cell chemistry, form factor and vendor that we adopt for battery cell supply. In so doing, we

believe that we can leverage the substantial battery cell investments and advancements being made globally by battery cell manufacturers to continue to improve the

10

Table of Contents

cost per kilowatt-hour of our battery pack. We maintain an internal battery cell testing lab and an extensive performance database of the many available lithium-ion cell vendors and chemistry

types. We intend to incorporate the battery cells that provide the best value and performance possible into our battery packs, and we expect this to continue over time as battery cells continue to improve in energy storage capacity, longevity, power

delivery and cost. We believe this flexibility will enable us to continue to evaluate new battery cells as they become commercially viable, and thereby optimize battery pack system performance and cost for our current and future vehicles. We believe

our ability to change battery cell chemistries and vendors while retaining our existing investments in software, electronics, testing and vehicle packaging, will enable us to quickly deploy various battery cells into our products and leverage the

latest advancements in battery cell technology.

The range of our electric vehicles on a single charge declines principally as

a function of usage, time and charging patterns. A customer s use of their Tesla vehicle as well as the frequency with which they charge the battery of their Tesla vehicle can result in additional deterioration of the battery s ability to

hold a charge. For example, we currently expect that the Tesla Roadster battery pack will retain approximately 60-65% of its ability to hold its initial charge after approximately 100,000 miles or seven years, which will result in a decrease to the

vehicle s initial range. In addition, based on internal testing, we estimate that our Tesla Roadster would have a 5-10% reduction in range when operated in -20°C temperatures.

To date, we have tested hundreds of battery cells of different chemistries, form factors and designs. Based on this evaluation, we are

presently using lithium-ion battery cells based on the 18650 form factor in all of our battery packs. These battery cells are commercially available in large quantities. We currently intend to use the same battery cell form factor in Model S and

Model X. We recently entered into a supply agreement with Panasonic Corporation (Panasonic) for the use of Panasonic s battery cells in Model S. We expect these battery cells to exhibit better performance and longer lifetimes than the battery

cells used in the Tesla Roadster.

Power Electronics

The power electronics in our electric powertrain govern the flow of electrical current throughout the car, primarily the current that

flows into and out of the battery pack. The power electronics has two primary functions, the control of torque generation in the motor while driving and the control of energy delivery back into the battery pack while charging.

The first function is accomplished through the drive inverter, which converts direct current (DC) from the battery pack into alternating

current (AC) to drive our three-phase induction motors. The drive inverter also converts the AC generated by regenerative braking back into DC for electrical storage in the battery pack. The drive inverter performs this function by using a

high-performance digital signal processor which runs some of the most complicated and detailed software in the vehicle. In so doing, the drive inverter is directly responsible for the performance, high efficiency and overall driving experience of

the vehicle.

The second function, charging the battery pack, is accomplished by the charger, which converts alternating

current (usually from a wall outlet or other electricity source) into direct current which can be accepted by the battery. The charger enables us to use any available source of power to charge our vehicle. Our vehicles can recharge on any electrical

outlet from a common outlet of 15 amps and 120 volts all the way up to a high power outlet of 70 amps and 240 volts, which provides faster recharging.

Since the charger system is built into our vehicles, it is possible to charge our vehicles using a variety of power outlets. For example, charging the Tesla Roadster battery pack to full capacity will

take approximately 7 hours using a 240 volt, 40 amp outlet that is widely available in many homes in the United States for electric appliances. A high power connection capable of 240 volts and 70 amps reduces this charging time to about 4.5 hours.

Such a connection can be installed in many homes with the assistance of a qualified electrician. For additional flexibility, the Tesla Roadster battery pack can also be charged with a 120 volt, 15 amp connection.

11

Table of Contents

Using this lower power output, the Tesla Roadster battery pack can be charged to full capacity in about 42 hours. This flexibility in charging provides customers with additional mobility, while

also allowing them to conveniently charge the vehicle overnight at home.

We offer a high-voltage fast charge option for Model

S with the 60 kWh and 85 kWh battery pack options that will enable the vehicle to charge from Tesla s SuperCharger network that we anticipate may be available in the future.

Motor

Our powertrains currently use custom designed 3-phase induction motors. We believe we have made several important innovations in our motor design that minimize mass while still providing high power and

efficiency. Our motors incorporate a proprietary fabricated copper rotor design. Our motors also include optimized winding patterns that allow for easy manufacture and fit in as much copper as possible to reduce resistance and energy losses.

Gearbox

We have designed custom, single speed gearboxes that are manufactured in-house for the Tesla Roadster and Model S. These gearboxes combine low mass with high efficiency and can match both the speed and

torque capabilities of our AC induction motors. In comparison to a gasoline-powered vehicle, the elimination of gear changes contributes to the rapid acceleration characteristics of our vehicles.

Control Software

The performance and safety systems of our vehicles and their battery packs require sophisticated control software. There are numerous processors in our vehicles to control these functions, and we write

custom firmware for many of these processors. The flow of electricity between the battery pack and the motor must be tightly controlled in order to deliver the performance and behavior expected in the vehicle. For example, software algorithms enable

the vehicle to mimic the creep feeling which drivers expect from an internal combustion engine vehicle without having to apply pressure on the accelerator. Similar algorithms control traction, vehicle stability and the sustained

acceleration and regenerative braking of the vehicle. Drivers use the information systems in our vehicles to optimize performance and charging modes and times. Software also is used extensively to monitor the charge state of each of the cells of the

battery pack and to manage all of its safety systems. In addition to the vehicle control software, we are also developing software for the infotainment system of Model S.

Vehicle Design and Engineering

In addition to the design, development and

production of the powertrain, we have created significant in-house capabilities in the design and engineering of electric vehicles and electric vehicle components and systems. We design and engineer bodies, chassis, interiors, heating and cooling

and low voltage electrical systems in house and to a lesser extent in conjunction with our suppliers. Our team has core competencies in computer aided design and crash test simulations which we expect to reduce the product development time of new

models.

Several traditional automotive subsystems required substantial redesign and custom optimization to integrate with the

powertrain of an electric vehicle. For example, we redesigned the heating, ventilation and air conditioning (HVAC) system to integrate with the battery thermal management system and to operate without the energy generated from an internal combustion

engine. In addition, low voltage electric systems which power features such as the radio, power windows, and heated seats also needed to be designed specifically for use in an electric vehicle. We have developed expertise in integrating these

components with the high-voltage power source in the vehicle and in designing components that significantly reduce their load on the vehicle battery pack, thereby maximizing the available range of the vehicle.

12

Table of Contents

Additionally, our team has expertise in lightweight materials, a very important

characteristic for electric vehicles given the impact of mass on range. The Tesla Roadster is built with an internally-designed carbon fiber body which provides a balance of strength and mass. We intend to build Model S with a lightweight aluminum

body and have been designing the body and chassis with a variety of materials and production methods that will help optimize the weight of the vehicle. We are developing an integrated electric vehicle manufacturing facility in Fremont, California,

the Tesla Factory, to assemble vehicles and manufacture components that are critical to our intellectual property and quality of Model S. Our engineering and manufacturing teams are working alongside one another in an effort to accelerate the

Model S development. We believe the co-location of our engineering and manufacturing teams will help accelerate the development of new products and allow for faster introduction of product changes.

Sales and Marketing

Company-Owned Sales

We market and sell cars directly to consumers. Until we opened our first store in Los Angeles, California in May 2008, all of our sales of the Tesla Roadster were conducted via the phone and internet, or

in-person at our headquarters and corporate events. Increasingly, sales are being made through our network of Tesla stores. Our Tesla stores are highly visible, premium outlets in major metropolitan markets some of which combine retail sales and

service. We intend to build separate sales and service locations in several markets. In April 2011, we opened our store at Santana Row in San Jose, California. The opening of our Santana Row store launched what we believe to be a new retail

experience designed to engage and inform potential customers about electric vehicles in general and the advantages of the Tesla experience in particular. We have opened five other locations modeled on this concept to complement a network of 20 sales

and service locations in North America, Europe and Asia. We plan to open additional stores and service centers during 2012, with a goal of establishing approximately 50 stores and additional service centers globally within the next several years in

connection with our Model S rollout.

We believe that by owning our own sales and service network we can offer a

compelling customer experience while achieving operating efficiencies and capturing sales and service revenues incumbent automobile manufacturers do not enjoy in the traditional franchised distribution and service model. Our customers deal directly

with our own Tesla-employed sales and service staff, creating what we believe is a differentiated buying experience from the buying experience consumers have with franchised automobile dealers and service centers. We believe we will also be able to

better control costs of inventory, manage warranty service and pricing, maintain and strengthen the Tesla brand, and obtain rapid customer feedback. Further, we believe that by owning our sales network we will avoid the conflict of interest in the

traditional dealership structure inherent to most incumbent automobile manufacturers where the sale of warranty parts and repairs by a dealer are a key source of revenue and profit for the dealer but often are an expense for the vehicle

manufacturer.

Reservations

We typically carry very limited inventory of our vehicles at our Tesla stores. While some customers purchase their vehicles from this inventory, most of our Tesla Roadster customers choose to customize

the appearance of their vehicle. Potential customers who purchase Tesla Roadsters manufactured to specification are required to enter into a purchase agreement and pay a nonrefundable deposit, which is applied towards the purchase price of the

vehicle. For vehicles purchased directly from our showrooms, no deposit is required. For our 2011 model year Tesla Roadsters manufactured to specification, our current purchase agreement requires the payment of an initial deposit, which varies based

on the country of purchase. For Model S and Model X, we require an initial refundable reservation payment of at least $5,000. We require nonrefundable deposits for Tesla Roadsters manufactured to specification. We also occasionally accept refundable

reservation payments if a customer is interested in purchasing a vehicle but not yet prepared to select the vehicle specifications. We currently require full payment of the purchase price of the vehicle only upon delivery of the vehicle to the

13

Table of Contents

customer. Reservation payments and deposits are used by us to fund, in part, our working capital requirements and help us to align production with demand. For customers who have placed a

refundable reservation payment with us, the reservation payment becomes a nonrefundable deposit once the customer has selected the vehicle specifications and enters into a purchase agreement.

As of December 31, 2011, we had received over 8,000 customer reservations for Model S. As of December 31, 2011, we held

reservation payments for Model S sedans in an aggregate of $90.0 million and reservation payments for undelivered Tesla Roadsters in an aggregate of $1.8 million. All reservation payments for Model S are fully refundable until such time that a

customer enters into a purchase agreement.

Leasing

We began offering a leasing alternative to customers of our Tesla Roadster in the United States and Canada in 2010 through wholly owned

subsidiaries. Under this program, we have permitted qualifying customers in the United States to lease the Tesla Roadster for generally 36 months, after which time they have the option of either returning the vehicle to us or purchasing it for a

predetermined residual value. We are using a third party provider to administer the back office services, including billing and collections, of the leases.

Marketing

Our principal marketing goals are to:

generate demand for our vehicles and drive leads to our sales teams;

build long-term brand awareness and manage corporate reputation;

manage our existing customer base to create loyalty and customer referrals; and

enable customer input into the product development process.

As the first company to commercially produce a federally-compliant, fully electric vehicle that achieves market-leading range on a single charge, we have been able to generate significant media coverage

of our company and our vehicles, and we believe we will continue to do so. To date, media coverage and word of mouth have been the primary drivers of our sales leads and have helped us achieve sales without traditional advertising and at relatively

low marketing costs. We also use traditional means of advertising including product placement in a variety of media outlets and pay-per-click advertisements on websites and applications relevant to our target demographics.

Our marketing efforts include events where our vehicles are displayed and demonstrated. These events range from widely attended public

events, such as the Detroit, Los Angeles, and Frankfurt auto shows, to smaller events oriented towards sales, such as private drive events.

Company-Owned Charging Network, Service and Warranty

Tesla SuperCharger Network

During 2012, we plan to introduce a

network of 90 kWh fast charging equipment, each called a Tesla SuperCharger, throughout North America for fast charging of Model S. The Tesla SuperCharger is an industrial grade, high speed charger designed to replenish 50% of the battery pack in

about 30 minutes. Access to the SuperCharger network will be available to owners of Model S vehicles with the 60 kWh and 85 kWh battery pack options.

Service

Service of our electric vehicles takes place at most of our

Tesla stores. Going forward, we intend to build separate sales and service locations in several markets. Within countries that are covered by our warranty agreement, we offer at home service through our mobile service technicians known as the Tesla

Rangers. We

14

Table of Contents

charge customers a fixed rate per mile for our Tesla Rangers technicians return trip from the location of the customer s vehicle to the nearest Tesla store. For customers that are not

covered by our warranty agreement, we offer at home service at a higher cost.

Tesla owners can upload data from their vehicle

and send it to us on a memory card or via an on-board GSM system, allowing us to diagnose and remedy many problems before ever looking at the vehicle. When maintenance or service is required, a customer can schedule service by contacting one of our

regional Tesla stores. Our Tesla Rangers can perform an array of procedures at a remote location, from annual inspections and firmware upgrades to full replacement of a power electronics module and other mechanical and electrical components. If

service is more extensive and requires a vehicle lift, we can coordinate shipping of vehicles to and from the nearest Tesla store.

We believe that our company-owned service enables our technicians to work closely with our engineers and research and development teams in Silicon Valley to identify problems, find solutions, and

incorporate improvements faster than incumbent automobile manufacturers.

New Vehicle Limited Warranty Policy

We provide a three year or 36,000 miles New Vehicle Limited Warranty with every Tesla Roadster, which we extended to

four years or 50,000 miles for the purchasers of our 2008 Tesla Roadster. Customers have the opportunity to purchase an Extended Service Plan for the period after the end of the New Vehicle Limited Warranty to cover additional services for an

additional three years or 36,000 miles, whichever comes first. The New Vehicle Limited Warranty is similar to other vehicle manufacturer s warranty programs and is intended to cover all parts and labor to repair defects in material or

workmanship in the body, chassis, suspension, interior, electronic systems, battery, powertrain and brake system. Exceptions to the New Vehicle Limited Warranty include wear items such as tires, brake pads and rotors, paint wear and tear, interior

wear and tear and battery performance. We intend to announce our new vehicle limited warranty for Model S in 2012.

Battery Replacement Option

While battery failure due to defects in material or workmanship is included in the Tesla Roadster New Vehicle Limited Warranty, battery performance, specifically its ability to store electricity over

time, is not covered in either the New Vehicle Limited Warranty or the Extended Service Plan. However, within three months of purchasing a vehicle, customers may purchase a one-time option to replace the battery pack at any time after the expiration

of the New Vehicle Limited Warranty but before the tenth anniversary of the purchase date of the vehicle. For customers that select this option, we agree to replace the original battery pack of the vehicle with a replacement battery pack which will

store at least 53 kilowatt-hours of usable energy. Charges in addition to the option purchase price apply if the customer exercises the battery pack replacement option prior to the seventh anniversary of the purchase date of the vehicle. The

customer is entitled to a partial refund of the option purchase price if the option is not elected by the eighth anniversary of the purchase date of the vehicle.

Manufacturing

Vehicle Assembly

We completed the production of Tesla Roadster gliders at Lotus Cars Limited in January 2012. We have a limited inventory of Roadsters for

sale primarily in Europe and Asia in 2012. As of December 31, 2011, we had delivered approximately 2,150 Roadsters to customers.

We have nearly completed the Tesla Factory, an integrated electric vehicle manufacturing facility in Fremont, California to manufacture components that are critical to our intellectual property and

quality of Model S, including stamping, plastics, body assembly, paint operations, battery pack manufacturing, final vehicle assembly and end-of-line testing. Certain major component systems will be purchased from suppliers. We

15

Table of Contents

currently intend to target an annual production rate at this facility for Model S of approximately 20,000 cars per year. We believe that we will be able to increase the annual production capacity

of this plant beyond this amount through additional capital spending as well as by changing operating patterns and adding additional shifts.

Powertrain Component Manufacturing

In addition to developing our

Model S and future vehicle manufacturing capabilities at the Tesla Factory, we are currently designing, developing and manufacturing lithium-ion battery packs, electric motors, gearboxes and components both for our vehicles and for our original

equipment manufacturer customers. These activities occur at our electric powertrain manufacturing facility in Palo Alto, California and at the Tesla Factory.

Supply Chain

Model S uses over 2,000 purchased parts which we

source globally from over 200 suppliers, many of whom are currently our single source suppliers for these components. We have developed close relationships with several key suppliers particularly in the procurement of cells and certain electric

powertrain components. While we obtain components from multiple sources whenever possible, similar to other automobile manufacturers, many of the components used in our vehicles are purchased by us from a single source.

To date, we have not qualified alternative sources for most of the single sourced components used in our vehicles and we generally do not

maintain long-term agreements with our suppliers. While we believe that we may be able to establish alternate supply relationships and can obtain or engineer replacement components for our single source components, we may be unable to do so in the

short term or at all at prices or costs that are favorable to us. For example, while several sources of the battery cell we have selected for our battery packs are available, we have fully qualified only one supplier for these cells. Any disruption

in the supply of battery cells from such vendor could temporarily disrupt production of the vehicles until such time as a different supplier is fully qualified and there can be no assurance that we would be able to successfully retain alternative

suppliers on a timely basis. Moreover, battery cell manufactures may not supply us at reasonable prices or on reasonable terms or may choose to refuse to supply electric vehicle manufacturers to the extent they determine that the vehicles are not

sufficiently safe.

We use various raw materials in our business including aluminum, steel, nickel and copper. The prices for

these raw materials fluctuate depending on market conditions and global demand for these materials. We believe that we have adequate supplies or sources of availability of the raw materials necessary to meet our manufacturing and supply

requirements. There are always risks and uncertainties, however, with respect to the supply of raw materials that could impact their availability in sufficient quantities or reasonable prices to meet our needs.

Quality Control

Our quality control efforts are divided between product quality and supplier quality, both of which are focused on designing and producing products and processes with high levels of reliability. Our

product quality engineers work with our engineering team and our suppliers to help ensure that the product designs meet functional specifications and durability requirements. Our supplier quality engineers work with our suppliers to ensure that

their processes and systems are capable of delivering the parts we need at the required quality level, on time, and on budget. Our quality systems engineers create and manage our systems, such as configuration management and corrective action

systems, to help ensure product developers, supplier chain managers, and production controllers have the product information they need.

Customers and Selected Relationships

We currently sell our cars primarily to individual customers. We have strategic or commercial relationships with Daimler, Toyota, and Panasonic. We intend to expand our business by developing and selling

additional powertrain components and systems to Daimler, Toyota and other third party OEMs, and have secured a $101.2 million loan under our DOE Loan Facility to fund the infrastructure these activities.

16

Table of Contents

Daimler AG

Beginning in 2008, we commenced efforts on a powertrain development arrangement with Daimler. In May 2009, we entered into a development

agreement with Daimler under which we have performed specified research and development services for the development of a battery pack and charger for Daimler s Smart fortwo electric drive. All development work related to the development

agreement had been completed as of December 31, 2009. Through December 2011, we had sold over 2,100 battery packs and chargers for the Smart fortwo electric drive program. In the first quarter of 2010, Daimler engaged us to assist with the

development and production of a battery pack and charger for a pilot fleet of its A-Class electric vehicles to be introduced in Europe during 2011. A formal agreement for this arrangement was entered into with Daimler in May 2010. In October 2010,

we completed the development of the A-Class battery pack and charger and began shipping production parts in February 2011. Through December 2011, we sold over 500 battery packs and chargers for the A-Class EV program. In the first quarter of 2010,

we completed the development and sale of modular battery packs for electric delivery vans for Freightliner, an affiliate of Daimler. Freightliner plans to use these electric vans in a limited number of customer trials.

In February 2012, we received an initial purchase order for the development of a full electric powertrain system for an additional

Mercedes Benz vehicle from Daimler. We are negotiating the agreement for production parts for this project; however, no agreement has yet been executed and there are no assurances that we will be able to enter into any such agreement.

In addition to the agreements described above, we have entered into an exclusivity and intellectual property agreement (EIP Agreement)

with Daimler North America Corporation (DNAC), an affiliate of Daimler, in which we agreed to begin negotiating in good faith to enter into further agreements within certain strategic cooperation areas, including technology collaboration in various

electric powertrain areas, automotive engineering support, joint electric vehicle development efforts and access to component parts for Tesla designed products. Under this EIP Agreement, we agreed that, until November 11, 2009, we would not

negotiate or enter into any agreements with other parties that would be competitive with the arrangements contemplated for these strategic cooperation areas, unless the results of such arrangement would be marketed solely under the Tesla brand. As

of that date, we had not executed any further agreements with Daimler in the areas of strategic cooperation.

The EIP

Agreement provides that ending July 2013, if the company receives an offer from a strategic competitor of Daimler to enter into an agreement for development of a non-Tesla branded vehicle or an integrated electric powertrain system, DNAC would be

given the right of first refusal to enter into such agreement with the company instead of, and on the same terms offered by, the third party.

The EIP Agreement also provides that if we execute a strategic cooperation agreement with DNAC to jointly engineer an electric vehicle, then additional exclusivities would apply until July 2013, provided

a minimum annual volume of sales is achieved. The EIP Agreement provides that none of the restrictions set out in that agreement, or in any strategic agreement, would limit us from developing technology with any third party for use in a

Tesla-branded product or service or related to the Tesla Roadster or Model S, engaging in any transaction with a company that is not a Daimler competitor, or supplying components for electric powertrains that are designed by third parties.

The EIP Agreement also provides that if the parties enter into the strategic agreements or further agreements, those

agreements will allocate intellectual property rights according to certain principles outlined in the EIP Agreement. In addition, until July 2013, before licensing intellectual property generated outside the scope of any strategic cooperation area

to a Daimler competitor, we would first have to offer DNAC the right to license the intellectual property on a non-exclusive, royalty-bearing basis, or on an exclusive basis in the automotive field; and if DNAC requests the latter, we must negotiate

such a license in good faith. If no agreement is reached, however, we would be free to license the technology to the Daimler competitor, and DNAC could take a non-exclusive license. Both we and Daimler have the right to terminate the EIP Agreement

17

Table of Contents

in the event the other party undergoes, or executes an agreement to undergo, a change of control. Any strategic cooperation agreements entered into between us and Daimler prior to termination

will not be affected by such termination.

To date, with the exception of the development agreement for the Smart fortwo

electric drive and the agreement for the development and production of a battery pack and charger for a pilot fleet of Daimler s A-Class electric vehicles, the strategic agreements described in the EIP Agreement have not been entered into, and

there can be no assurance that the parties will ever enter into such agreements. Even if we were to enter into such agreements, the parties may negotiate and agree to terms that are different to those set forth in the EIP Agreement and outlined

above. Such different or new terms may be more or less favorable to us.

In addition to these agreements, Blackstar lnvestco

LLC (Blackstar), an affiliate of Daimler, beneficially owned 8,113,215 shares of our common stock as of December 31, 2011. Blackstar s representative, Dr. Herbert Kohler, serves as a member of our Board of Directors.

Toyota Motor Corporation

In May 2010, we and Toyota announced our intention to cooperate on the development of electric vehicles, and for us to receive Toyota s support with sourcing parts and production and engineering

expertise for Model S. In July 2010, we entered into an early phase agreement to develop an electric powertrain for the Toyota RAV4. With an aim by Toyota to market the electric vehicle in the United States in 2012, prototypes would be made by

combining the Toyota RAV4 model with a Tesla electric powertrain. We began developing and delivering prototypes to Toyota for evaluation in September 2010.

In October 2010, we entered into a contract services agreement with Toyota for the development of a validated powertrain system, including a battery, power electronics module, motor, gearbox and

associated software, which will be integrated into an electric vehicle version of the Toyota RAV4. Pursuant to our agreements, Toyota will pay us up to $69 million for the anticipated development services to be provided by us over the expected term

of our performance. We expect to complete all of the development services for the RAV4 EV in the first quarter of 2012.

Additionally, in July 2011, we entered into an agreement to supply Toyota with electric powertrain system for the RAV4 EV. We plan to

begin delivery of these systems to Toyota for installation into the Toyota RAV4 EV in the first half of 2012. Our production activities under this program are expected to continue through 2014.

In addition to these agreements, in July 2010, we sold 2,941,176 shares of our common stock to Toyota at our IPO price of $17.00 per

share.

Panasonic

Panasonic is a supplier of battery cells for our battery packs. In January 2010, we announced that we were collaborating with Panasonic on the development of next-generation electric vehicle cells based

on the 18650 form factor and nickel-based lithium ion chemistry. In October 2011, we finalized a supply agreement for these battery cells. The agreement supplies us with battery cells to build more than 80,000 vehicles over the next four years.

In November 2010, we sold 1,418,573 shares of our common stock to an entity affiliated with Panasonic Corporation at a price

of $21.15 per share, which was the average of the trading highs and lows of our common stock from October 25 to October 29, 2010.

18

Table of Contents

Governmental Programs, Incentives and Regulations

United States Department of Energy Loans

On January 20, 2010, we entered into a loan facility with the Federal Financing Bank (FFB) and the United States Department of Energy (DOE), under the DOE s Advanced Technology Vehicles

Manufacturing Loan Program, as set forth in Section 136 of the Energy Independence and Security Act of 2007 (ATVM Program). We refer to such loan facility, including amendments thereto, as the DOE Loan Facility. Under the DOE Loan Facility, FFB

has made available to us two multi-draw term loan facilities in an aggregate principal amount of up to $465.0 million and the DOE has agreed to reimburse FFB for any liabilities, losses, costs or expenses incurred by FFB with respect to the

term loan facilities. Up to an aggregate principal amount of $101.2 million will be made available under the first term loan facility to finance up to 80% of the costs eligible for funding under the ATVM Program for the powertrain engineering

and the build-out of a facility to design and manufacture lithium-ion battery packs, electric motors and electric components (the Powertrain Facility). Up to an aggregate principal amount of $363.9 million will be made available under the

second term loan facility to finance up to 80% of the costs eligible for funding under the ATVM Program for the development of, and to build out the manufacturing facility for, our Model S sedan (the Model S Facility). Under the DOE Loan

Facility, we are responsible for the remaining 20% of the costs eligible for funding under the ATVM Program for the projects as well as any cost overruns for each project.

Through December 31, 2011, we have received draw downs under the DOE Loan Facility for an aggregate of $276.3 million, with interest rates ranging from 1.0% to 3.4%, for eligible project costs under

both projects that we have incurred from December 15, 2008 through November 30, 2011. In February 2012, we received additional loans under the DOE Loan Facility for $14.4 million at interest rates ranging from 0.9% to 1.4%.

In connection with the DOE Loan Facility, we have also issued the DOE a warrant to purchase up to 3,085,011 shares of our common stock at

an exercise price of $7.54 per share and a warrant to purchase up to 5,100 shares of our common stock at an exercise price of $8.94 per share. Beginning on December 15, 2018 and until December 14, 2022, the shares subject to purchase under

these warrants will become exercisable in quarterly amounts depending on the average outstanding balance of the loan during the prior quarter. These warrants may be exercised until December 15, 2023. If we prepay the DOE Loan Facility in full

prior to December 15, 2018, no shares will be exercisable under these warrants, except in the case of an event of default, which could accelerate the vesting.

For more information on the DOE Loan Facility, see Note 9 to our Consolidated Financial Statements included in this Annual Report on Form 10-K under Item 8. Financial Statements and

Supplementary Data.

California Alternative Energy and Advanced Transportation Financing Authority Tax Incentives

In December 2009, we finalized an arrangement with the California Alternative Energy and Advanced Transportation

Financing Authority (CAEATFA) that will result in an exemption from California state sales and use taxes for up to $320 million of manufacturing equipment. To the extent all of this equipment is purchased and would otherwise be subject to

California state sales and use tax, we believe this incentive would result in tax savings by us of up to approximately $31 million over a three year period starting in December 2009. The equipment purchases may be used only for three purposes:

(i) to establish our production facility for Model S in California, (ii) to upgrade our Palo Alto powertrain production facility, and (iii) to expand our current Tesla Roadster assembly operations at our Menlo Park facility. As

of December 31, 2011, we have received the tax exemption for approximately $97.9 million in qualifying purchases.

In

January 2012, we finalized an additional agreement with CAEATFA that will result in an exemption from California state sales and use taxes for up to $292 million of manufacturing equipment. To the extent all of this equipment is purchased and

would otherwise be subject to California state sales and use tax, we believe this

19

Table of Contents

incentive would result in tax savings by us of up to approximately $24 million over a three year period starting in December 2011. The equipment purchases may be used only for two purposes:

(i) to develop the Model X crossover vehicle and its production capacity in California and, (ii) to further upgrade our powertrain production facilities in California. As of January 31, 2012, we had not begun to submit qualifying

equipment for this exemption.

California Air Resources Board s Zero Emissions Vehicle Program

In connection with the delivery and placement into service of our zero emission vehicles in a number of states, we have earned and will

continue to earn tradable credits that can be sold. Under California s Low-Emission Vehicle Regulations, and similar laws in other states, vehicle manufacturers are required to ensure that a portion of the vehicles delivered for sale in that

state during each model year are zero emission vehicles. Currently, the states of Arizona, California, Connecticut, Maine, Maryland, Massachusetts, New Jersey, New Mexico, New York, Oregon, Rhode Island and Vermont have such laws in effect. These

laws provide that a manufacturer of zero emission vehicles may earn credits, referred to as ZEV credits, and may sell excess credits to other manufacturers who apply such credits to comply with these regulatory requirements. As a manufacturer solely

of zero emission vehicles, we earn ZEV credits on each vehicle sold in such states and have entered into agreements with other automobile manufacturers to sell the ZEV credits that we earn. Recently, California passed amendments to the ZEV mandate

that would require all large volume manufacturers (those manufacturers selling 20,000 or more vehicles in California) to increase the number of zero emission vehicles sold. Under the new requirements, by 2025 up to 15.4% of each large volume

manufacturers fleet must be made of zero emission vehicles.

We have entered into three contracts for the sale of ZEV

credits with three separate automotive manufacturers. For the years ended December 31, 2011, 2010 and 2009, we earned revenue from the sale of ZEV credits of $2.7 million, $2.8 million and $8.2 million, respectively. Our current

agreement with an automotive manufacturer provides for the sale of a partial quantity of the ZEV credits that we earn from the sale of vehicles that we manufacture in 2012, with an option for additional sales of uncommitted credits in future model

years. We have also entered into a third contract with another automotive manufacturer to sell ZEV credits earned from the sale of Model S vehicles in 2012. To the extent we have additional ZEV credits available for sale, we may enter into new

agreements with automotive manufacturers to sell such credits.

Regulation Vehicle Safety and Testing

Our vehicles are subject to, and the Tesla Roadster complies with, or is exempt from, numerous regulatory requirements

established by the National Highway Traffic Safety Administration (NHTSA), including all applicable United States federal motor vehicle safety standards (FMVSS). As a manufacturer, we must self-certify that a vehicle meets or otherwise obtain an

exemption from all applicable FMVSSs, as well as the NHTSA bumper standard, before the vehicle can be imported into or sold in the United States. There are numerous FMVSSs that apply to our vehicles. Examples of these requirements include:

Crash-worthiness requirements including applicable and appropriate level of vehicle structure and occupant protection in frontal, side and

interior impacts including through use of equipment such as seat belts and airbags which must satisfy applicable requirements;

Crash avoidance requirements including appropriate steering, braking and equipment requirements, such as, headlamps, tail lamps, and other

required lamps, all of which must conform to various photometric and performance requirements;

Electric vehicle requirements limitations on electrolyte spillage, battery retention, and avoidance of electric shock following specified

crash tests;

20

Table of Contents

Windshield defrosting and defogging defined zones of the windshield must be cleared within a specified timeframe; and

Rearview mirror requirements rearward areas that must be visible to the driver via the mirrors.

As a small volume manufacturer that produces only electric vehicles, we have applied for, and have been granted, exemptions from certain

advanced air bag and electronic stability control requirements, which apply to Tesla Roadsters manufactured through November 7, 2011. Under U.S. law, we are required to certify compliance with, or obtain exemption from all applicable federal

motor vehicle safety standards and we have done so with respect to each vehicle we have offered for sale in the United States. Based on testing, engineering analysis, and other information, we have certified that the Tesla Roadster complies with, or

is exempt from all applicable NHTSA standards by affixing a certification label to each Tesla Roadster sold.

We are also

required to comply with other requirements of federal laws administered by NHTSA, including the Corporate Average Fuel Economy standards, consumer information labeling requirements, early warning reporting requirements regarding warranty claims,

field reports, death and injury reports and foreign recalls, and owner s manual requirements.

Our vehicles sold in

Europe are subject to European Union safety testing regulations. Many of those regulations, referred to as European Union Whole Vehicle Type Approval (WVTA), are different from the federal motor vehicle safety standards applicable in the United

States and may require redesign and/or retesting. Our Tesla Roadsters are currently approved for sale on a limited basis in the European Union via the Small Series WVTA, which permits the manufacture and sale in the European Union of no more

than 1,000 vehicles per year. Since we have fewer than 1,000 Tesla Roadsters left to sell, we have no plans to commence testing our Tesla Roadsters for the WVTA to assure compliance with the European Union requirements to permit unlimited sales.

Similarly, Australia and Japan have additional testing regulations applicable to high volume manufacturers. We also plan to keep Australian and Japanese sales of our Tesla Roadsters at a low volume, and have no plans to comply with the Australian

and Japanese requirements to permit high volume sales in these jurisdictions. In connection with the introduction of the Tesla Roadster in Australia and Japan, we conducted a frontal impact test based on European Union testing standards on the Tesla

Roadster in November 2009, which is required for sales exceeding certain annual volumes outside the United States. While the Tesla Roadster met most of the criteria for occupant protection and all criteria for high voltage safety in the front impact

crash test, there were two criteria that were not met in the test. Based on our analysis of additional compliance options in Australia and Japan, we believe such an outcome should not limit our ability to sell the Tesla Roadster in Australia below

certain annual volumes or, subject to compliance with certain Japanese import rules, have a material impact on our ability to sell Tesla Roadsters in Japan.

The Federal Trade Commission (FTC) requires us to calculate and display the range of our electric vehicles on a label we affix to the vehicle s window. The FTC specifies that we follow testing

requirements set forth by the Society of Automotive Engineers (SAE) which further requires that we test using the United States EPA s combined city and highway testing cycles. In July 2011, the EPA announced new energy efficiency testing

methodologies for electric vehicles. These new requirements, when applied to our vehicles, could reduce the advertised range of our vehicles by up to 30% as compared to methodologies we have used to estimate the range of the vehicles at a steady

speed of 55 miles per hour. Shortly after the EPA issued their new requirements, the FTC issued a proposed rule that would harmonize current FTC label requirements with the EPA s new fuel economy label requirements. If finalized, changes to the

testing cycles previously utilized could impair our ability to deliver Model S with the previously advertised range based on the steady speed of 55 miles per hour range methodology, which could result in the cancellation of a number of the over

8,000 reservations that have been placed for Model S as of December 31, 2011. Although the real life customer experience of the range of our electric vehicles will not change due to the changes in the FTC or EPA standards, the reduction in the

advertised range could negatively impact our sales and harm our business.

21

Table of Contents

The Automobile Information and Disclosure Act requires manufacturers of motor vehicles to

disclose certain information regarding the manufacturer s suggested retail price, optional equipment and pricing. In addition, the Act allows inclusion of city and highway fuel economy ratings, as determined by EPA, as well as crash test

ratings as determined by NHTSA if such tests are conducted.

Regulation EPA Emissions & Certificate of

Conformity

The Clean Air Act requires that we obtain a Certificate of Conformity issued by the EPA and a California

Executive Order issued by the California Air Resources Board (CARB) with respect to emissions for our vehicles, including Model S. The Certificate of Conformity is required for vehicles sold in states covered by the Clean Air Act s standards

and both the Certificate of Conformity and the Executive Order is required for vehicles sold in states that have sought and received a waiver from the EPA to utilize California standards. The California standards for emissions control for certain

regulated pollutants for new vehicles and engines sold in California are set by CARB. States that have adopted the California standards as approved by EPA also recognize the Executive Order for sales of vehicles.

Regulation Battery Safety and Testing

Our battery pack conforms with mandatory regulations that govern transport of dangerous goods that may present a risk in transportation, which includes lithium-ion batteries. The governing

regulations, which are issued by the Pipeline and Hazardous Materials Safety Administration (PHMSA) are based on the UN Recommendations on the Safe Transport of Dangerous Goods Model Regulations, and related UN Manual Tests and Criteria. The

regulations vary by mode of transportation when these items are shipped such as by ocean vessel, rail, truck, or by air.

We

have completed the applicable transportation tests for our prototype and production battery packs demonstrating our compliance with the UN Manual of Tests and Criteria, including:

Altitude simulation simulating air transport;

Thermal cycling assessing cell and battery seal integrity;

Vibration simulating vibration during transport;

Shock simulating possible impacts during transport; and

External short circuit simulating an external short circuit.

We also subject our battery packs to the appropriate tests specified in the Society of Automotive Engineers (SAE) J2464 and J2929 which

include further tests such as immersion, humidity, and exposure to fire.

We use lithium metal oxide cells in our battery

packs. The cells do not contain any lead, mercury, cadmium, or other hazardous materials, heavy metals, or any toxic materials. Our battery packs include certain packaging materials which contain trace amounts of various hazardous chemicals whose

use, storage and disposal is regulated under federal law. We currently have an agreement with a third party battery recycling company to recycle our battery packs. If a customer wishes to dispose of a battery pack from one of our vehicles, we

anticipate accepting the depleted battery from the customer without any additional charge.

Automobile Manufacturer and

Dealer Regulation

State law regulates the manufacture, distribution and sale of automobiles, and generally requires

motor vehicle manufacturers and dealers to be licensed. To the extent possible, we plan to secure dealer licenses (or the equivalent of a dealer license) and engage in activities as a motor vehicle dealer in so far as we are permitted to do so as we

open additional Tesla stores. Some states do not permit automobile manufacturers to be licensed as

22

Table of Contents

dealers or to act in the capacity of a dealer. To sell vehicles to residents of states where we are not licensed as a dealer, to the extent permitted by local law, both the actual sale and all

activities related to the sale would generally have to occur out of state. In this scenario, it is possible that activities related to marketing, advertising, taking orders, taking reservations and reservation payments, and delivering vehicles could

be viewed by a state as conducting unlicensed activities in the state or otherwise violating the state s motor vehicle industry laws. Regulators in these states may require us to hold and meet the requirements of appropriate dealer or other

licenses and, in states in which manufacturers are prohibited from acting as dealers, may otherwise prohibit or impact our planned activities.

In jurisdictions where we do not have a Tesla store, a customer may try to purchase our vehicles over the internet. However, some states, such as Kansas, have laws providing that a manufacturer cannot

deliver a vehicle to a resident of such state except through a dealer licensed to do business in that state which may be interpreted to require us to open a store in the state of Kansas in order to sell vehicles to Kansas residents. Such laws may be

interpreted to require us to open a store in such state before we sell vehicles to residents of such states. In some states where we have opened a viewing gallery that is not a full retail location, it is possible that a state regulator

could take the position that activities at our gallery constitute an unlicensed motor vehicle dealership and thereby violates applicable manufacturer-dealer laws. Although we would prefer that a state regulator address any concerns by discussing

such concerns with us and requesting voluntary compliance, a state could also take action against us, including levying fines or requiring that we refrain from certain activities. In addition, some states have requirements that service facilities be

available with respect to vehicles sold in the state, which may be interpreted to also require that service facilities be available with respect to vehicles sold over the internet to residents of the state thereby limiting our ability to sell

vehicles in states where we do not maintain service facilities.

The foregoing examples of state laws governing the sale of

motor vehicles are just some of the regulations we will face as we sell our vehicles. In many states, the application of state motor vehicle laws to our specific sales model is largely without precedent, particularly with respect to sales over the

internet, and would be determined by a fact specific analysis of numerous factors, including whether we have a physical presence or employees in the applicable state, whether we advertise or conduct other activities in the applicable state, how the

sale transaction is structured, the volume of sales into the state, and whether the state in question prohibits manufacturers from acting as dealers. As a result of the fact specific and untested nature of these issues, and the fact that applying

these laws intended for the traditional automobile distribution model to our sales model allows for some interpretation and discretion by the regulators, state legal prohibitions may prevent us from selling to consumers in such state.

California laws, and potentially the laws of other states, restrict the ability of licensed dealers to advertise or take deposits for

vehicles before they are available. In November 2007, we became aware that the New Motor Vehicle Board of the California Department of Transportation has considered whether our reservation and advertising policies comply with these laws. To date, we

have not received any communications on this topic from the New Motor Vehicle Board or the Department of Motor Vehicles (DMV) which has the power to enforce these laws. There can be no assurance that the DMV will not take the position that our

vehicle reservation or advertising practices violate the law. We expect that if the DMV determines that we may have violated the law, it would initially discuss its concerns with us and request voluntary compliance. If we are ultimately found to be

in violation of California law, we might be precluded from taking reservation payments, and the DMV could take other actions against us, including levying fines and requiring us to refund reservation payments. Resolution of any inquiry may also

involve restructuring certain aspects of the reservation program. The DMV also has the power to suspend licenses to manufacture and sell vehicles in California, following a hearing on the merits, which it has typically exercised only in cases of

significant or repeat violations and/or a refusal to comply with DMV directions.

Certain states may have specific laws which

apply to dealers, or manufacturers selling directly to consumers, or both. For example, the state of Washington requires that reservation payments or other payment

23

Table of Contents

received from residents in the state of Washington must be placed in a segregated account until delivery of the vehicle, which account must be unencumbered by any liens from creditors of the

dealer and may not be used by the dealer. Consequently, we established a segregated account for reservation payments in the state of Washington in January 2010. There can be no assurance that other state or foreign jurisdictions will not require

similar segregation of reservation payment received from customers. Our inability to access these funds for working capital purposes could harm our liquidity.

Furthermore, while we have performed an analysis of the principal laws in the European Union relating to our distribution model and believe we comply with such laws, we have not performed a complete

analysis in all foreign jurisdictions in which we may sell vehicles. Accordingly, there may be laws in jurisdictions we have not yet entered or laws we are unaware of in jurisdictions we have entered that may restrict our vehicle reservation

practices or other business practices. Even for those jurisdictions we have analyzed, the laws in this area can be complex, difficult to interpret and may change over time.

In addition to licensing laws, specific laws and regulations in each of the states (and their interpretation by regulators) may limit or determine how we sell, market, advertise, and otherwise solicit

sales, take orders, take reservations and reservation payments, deliver, and service vehicles for consumers and engage in other activities in that state. While we have performed an analysis of laws in certain jurisdictions in which we have Tesla

stores, we have not performed a complete analysis in all jurisdictions in which we may sell vehicles. Accordingly, there may be laws in jurisdictions we have not yet entered that may restrict our vehicle reservation practices or other business

practices.

Competition

Competition in the automotive industry is intense and evolving. We believe the impact of new regulatory requirements for occupant safety and vehicle emissions, technological advances in powertrain and

consumer electronics components, and shifting customer needs and expectations are causing the industry to evolve in the direction of electric-based vehicles. We believe the primary competitive factors in our markets include but are not limited to:

technological innovation;

product quality and safety;

service options;

product performance;

design and styling;

product price; and

manufacturing efficiency.

We believe that our vehicles compete in the market both based on their traditional segment classification as well as based on their propulsion technology. Within the electric-based vehicle segment, there

are three primary means of powertrain electrification which will differentiate various competitors in this market:

Electric Vehicles are vehicles powered completely by a single on-board energy storage system (battery pack or fuel cell) which is refueled

directly from an electricity source. Both the Tesla Roadster and Model S are examples of electric vehicles.

Plug-in Hybrid Vehicles are vehicles powered by both a battery pack with an electric motor and an internal combustion engine which can be

refueled both with traditional petroleum fuels for the engine and electricity for the battery pack. The internal combustion engine can either work in parallel with the

24

Table of Contents

electric motor to power the wheels, such as in a parallel plug-in hybrid vehicle, or be used only to recharge the battery, such as in a series plug-in hybrid vehicle like the Chevrolet Volt.

Hybrid Electric Vehicles are vehicles powered by both a battery pack with an electric motor and an internal combustion engine but which can only

be refueled with traditional petroleum fuels as the battery pack is charged via regenerative braking, such as used in a hybrid electric vehicle like the Toyota Prius.

The worldwide automotive market, particularly for alternative fuel vehicles, is highly competitive today and we expect it will become

even more so in the future. Prior to the introduction of the Nissan Leaf in December 2010, no mass produced performance highway-capable electric vehicles were being sold in the United States. In Japan, Mitsubishi has been selling its electric iMiEV

since April 2010. We expect additional competitors to enter the United States and Europe within the next several years, and as they do so, we expect that we will experience significant competition. With respect to our Tesla Roadster, we currently

face strong competition from established automobile manufacturers, including manufacturers of high-performance vehicles, such as Porsche and Ferrari. In addition, upon the launch of our Model S sedan, we will face competition from existing and

future automobile manufacturers in the extremely competitive premium sedan market, including Audi, BMW, Lexus and Mercedes.

Many established and new automobile manufacturers have entered or have announced plans to enter the alternative fuel vehicle market. For

example, Nissan introduced the Nissan Leaf, a fully electric vehicle in December 2010 and Ford has announced that it plans to introduce the pure electric Ford Focus and plug-in hybrid Ford C-Max in 2012. In addition, several manufacturers, including

General Motors, Toyota, Ford, and Honda are each selling hybrid vehicles, and certain of these manufacturers have announced plug-in versions of their hybrid vehicles. For example, in December 2010, General Motors introduced the Chevrolet Volt, which

is a plug-in hybrid vehicle that operates purely on electric power for a limited number of miles, at which time an internal combustion engine engages to recharge the battery.

Moreover, it has been reported that BMW, Daimler, Lexus, Audi, Renault and Volkswagen are also developing electric vehicles. Several new start-ups have also announced plans to enter the market for

performance electric vehicles, although none of these have yet come to market. Finally, electric vehicles have already been brought to market in China and other foreign countries and we expect a number of those manufacturers to enter the United

States market as well.

Most of our current and potential competitors have significantly greater financial, technical,

manufacturing, marketing and other resources than we do and may be able to devote greater resources to the design, development, manufacturing, distribution, promotion, sale and support of their products. Virtually all of our competitors have more

extensive customer bases and broader customer and industry relationships than we do. In addition, almost all of these companies have longer operating histories and greater name recognition than we do. Our competitors may be in a stronger position to

respond quickly to new technologies and may be able to design, develop, market and sell their products more effectively. We believe our exclusive focus on electric vehicles and electric vehicle components, as well as our history of vehicle

development and production, are the basis on which we can compete in the global automotive market in spite of the challenges posed by our competition; however, we have a limited history of operations.

Intellectual Property

Our success depends, at least in part, on our ability to protect our core technology and intellectual property. To accomplish this, we

rely on a combination of patents, patent applications, trade secrets, including know-how, employee and third party nondisclosure agreements, copyright laws, trademarks, intellectual property licenses and other contractual rights to establish and

protect our proprietary rights in our technology. As of December 31, 2011, we had 59 issued patents and more than 230 pending patent applications with the United States Patent and

25

Table of Contents

Trademark Office and internationally in a broad range of areas. Our issued patents start expiring in 2026. We intend to continue to file additional patent applications with respect to our

technology. We do not know whether any of our pending patent applications will result in the issuance of patents or whether the examination process will require us to narrow our claims. Even if granted, there can be no assurance that these pending

patent applications will provide us with protection.

Seasonality

Sales of the Tesla Roadster have fluctuated on a seasonal basis with increased sales during the spring and summer months in our second and

third fiscal quarters relative to our fourth and first fiscal quarters. We note that, in general, automotive sales tend to decline over the winter season and we anticipate that our sales of Model S, Model X and other electric vehicles we introduce

in the future may have similar seasonality. However, our limited operating history makes it difficult for us to judge the exact nature or extent of the seasonality of our business. We do not expect our powertrain component sales and development

services revenue to be impacted to a significant extent by seasonality.

Segment Information

We have determined that we operate as one reporting segment, which is the design, development, manufacturing and sales of electric

vehicles and electric powertrain components. For information regarding financial data by geographic areas, see Note 13 to our Consolidated Financial Statements included in this Annual Report on Form 10-K under Item 8. Financial Statements and

Supplementary Data.

Employees

As of December 31, 2011, we had 1,417 full-time employees consisting of 452 in manufacturing, 315 in powertrain research and development, 276 in sales, marketing and service, 216 in vehicle design

and engineering, and 158 in general and administration. Of all of our employees, 1,088 are located in our Northern California offices (including the Tesla Factory), 81 are located at our Los Angeles facility and 48 are located at our United Kingdom

offices. The other employees are located in our domestic sales and service centers and other international locations. None of our employees are currently represented by labor unions or are covered by a collective bargaining agreement with respect to

their employment. To date, we have not experienced any work stoppages, and we consider our relationship with our employees to be good.

Available Information

We file or furnish periodic reports and amendments thereto, including our Annual Reports on Form 10-K, our Quarterly Reports on Form 10-Q

and Current Reports on Form 8-K; proxy statements and other information with the Securities and Exchange Commission (SEC). Such reports, amendments, proxy statements and other information may be obtained by visiting the Public Reference Room of the

SEC at 100 F Street, NE, Washington, D.C. 20549. Information on the operation of the Public Reference Room can be obtained by calling the SEC at 1-800-SEC-0330. In addition, the SEC maintains a website (www.sec.gov) that contains reports,

proxy and information statements, and other information regarding issuers that file electronically. Our reports, amendments thereto, proxy statements and other information are also made available, free of charge, on our investor relations website at

ir.teslamotors.com as soon as reasonably practicable after we electronically file or furnish such information with the SEC. The information posted on our website is not incorporated by reference into this Annual Report on Form 10-K.

26

Table of Contents

ITEM 1A.

RISK FACTORS

You

should carefully consider the risks described below together with the other information set forth in this report, which could materially affect our business, financial condition and future results. The risks described below are not the only risks

facing our company. Risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially adversely affect our business, financial condition and operating results.

Risks Related to Our Business and Industry

Our limited operating history makes evaluating our business and future prospects difficult, and may increase the risk of your investment.

You must consider the risks and difficulties we face as an early stage company with a limited operating history. If we do not successfully

address these risks, our business, prospects, operating results and financial condition will be materially and adversely harmed. We were formed in July 2003. We began delivering our first performance electric vehicle, the Tesla Roadster, in early

2008, and as of December 31, 2011, we had only sold approximately 2,150 Roadsters to customers, almost all of which were sold in the United States and Europe. Our revenues for the years ended December 31, 2011, 2010 and 2009 were $204.2

million, $116.7 million and $111.9 million, respectively. We have a very limited operating history on which investors can base an evaluation of our business, operating results and prospects.

To date, we have derived our revenues principally from sales of the Tesla Roadster and from electric powertrain development services and

sales. We intend in the longer term to derive substantial revenues from the sales of our Model S sedan, our Model X crossover and future electric vehicles. Model S is in development and we plan to commence deliveries by July 2012. We have no

operating history with respect to Model S and have not yet fully completed the component procurement process for Model S, which limits our ability to accurately forecast the cost of the vehicle. Further, we have only recently produced an early

prototype of the Model X crossover. We plan to start Model X production in late 2013 and ramp to significant customer deliveries in early 2014. We only completed the purchase of our Tesla Factory in Fremont, California in October 2010 to produce

such vehicles, and we have not yet completely finalized the full vehicle design or our engineering, manufacturing or component supply plans for Model S. In addition, our powertrain component sales, development services revenue and powertrain

research and development compensation have been almost entirely generated under arrangements with Daimler AG (Daimler) and Toyota Motor Corporation (Toyota). While in November 2011 we received a letter of intent from Daimler for a full electric

powertrain program for a vehicle in the Mercedes line and recently we received a purchase order to begin the development work, we have not yet finalized with Daimler the terms for this program and may never do so. Furthermore, while we have executed

a supply and services agreement with Toyota related to the Toyota RAV4 EV program, there are no assurances that we will be able to secure future business with Daimler, Toyota or any of their affiliates.

It is difficult to predict our future revenues and appropriately budget for our expenses, and we have limited insight into trends that

may emerge and affect our business. For example, during the years ended 2011, 2010 and 2009, we recorded quarterly revenues of as much as $58.2 million and as little as $18.6 million and quarterly operating losses of as much as