UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM S-1
REGISTRATION STATEMENT
UNDER
THE SECURITIES ACT OF 1933
Tesla Motors, Inc.
(Exact name of Registrant as specified in its charter)
Delaware
3711
91-2197729
(State or other jurisdiction of
incorporation or organization)
(Primary Standard Industrial
Classification Code Number)
(I.R.S. Employer
Identification Number)
3500 Deer Creek Road
Palo Alto, California 94304
(650) 681-5000
(Address, including zip code, and telephone number,
including area code, of Registrant s principal executive offices)
Elon Musk
Chief Executive Officer
Tesla Motors, Inc.
3500 Deer Creek Road
Palo Alto, California 94304
(650) 681-5000
(Name, address, including zip code, and telephone number,
including area code, of agent for service)
Copies to:
Larry W. Sonsini
Mark B. Baudler
Wilson Sonsini Goodrich & Rosati, P.C.
650 Page Mill Road
Palo Alto, California 94304
(650) 493-9300
Eric S. Whitaker
Jonathan A. Chang
Tesla Motors, Inc.
3500 Deer Creek Road
Palo Alto, California 94304
(650) 681-5000
Kevin P. Kennedy
Simpson Thacher & Bartlett LLP
2550 Hanover
Street
Palo Alto, California 94304
(650) 251-5000
Approximate date of commencement of
proposed sale to the public: As soon as practicable after this Registration Statement becomes effective.
If any of the
securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act, check the following box.
If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, please
check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.
If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list
the Securities Act registration statement number of the earlier effective registration statement for the same offering.
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller
reporting company. See the definitions of large accelerated filer, accelerated filer and smaller reporting company in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer
Accelerated filer
Non-accelerated filer
(Do not check if a smaller reporting company)
Smaller reporting company
CALCULATION OF REGISTRATION FEE
Title of Each Class of Securities to be Registered
Amount to be
Registered
Proposed
Maximum
Offering
Price Per Share(1)
Proposed Maximum
Aggregate Offering
Price(1)(2)
Amount of
Registration
Fee
Common Stock, $0.001 par value
6,095,000
$26.00
$158,470,000
$18,398
(1)
Estimated solely for the purpose of computing the amount of the registration fee pursuant to Rule 457(c) under the Securities Act of 1933, as amended. The offering
price and registration fee are based on the high and low sale prices for the common stock on May 18, 2011 on the Nasdaq Global Select Market.
(2)
Includes the aggregate offering price of additional shares that the underwriter has the option to purchase.
The Registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until
the Registrant shall file a further amendment which specifically states that this Registration Statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933 or until the Registration Statement shall
become effective on such date as the Commission acting pursuant to said Section 8(a) may determine.
Table of Contents
The information in this preliminary prospectus is not complete and may be changed. These securities
may not be sold until the registration statement filed with the Securities and Exchange Commission is effective. This preliminary prospectus is not an offer to sell nor does it seek an offer to buy these securities in any jurisdiction where the
offer or sale is not permitted.
SUBJECT TO COMPLETION DATED MAY 25, 2011
5,300,000 Shares
Common Stock
This is a public offering of shares of common stock of Tesla Motors, Inc.
Tesla Motors, Inc. is offering all of the shares to be sold in the offering.
Our common stock is traded on the Nasdaq Global Select Market under the symbol TSLA. The last reported sale price of our
common stock on May 18, 2011, as reported on Nasdaq, was $26.35 per share.
Mr. Elon Musk, our Chief Executive
Officer, Product Architect and Chairman of our Board of Directors, will purchase 1,500,000 shares of our common stock directly from us at the public offering price in a concurrent private placement, for an aggregate purchase price of approximately
$40,000,000. In addition, Blackstar Investco LLC, an affiliate of Daimler AG, will purchase up to 644,475 shares of our common stock directly from us at the public offering price in a concurrent private placement for an aggregate estimated purchase
price of up to approximately $17,000,000. The purchase price in the concurrent private placement assumes an offering price of $26.35 per share.
See the
section entitled Risk Factors beginning on page 11 to read about factors you should consider before buying shares of the common stock.
Per Share
Total
Offering price
Underwriting discount
Proceeds, before expenses, to Tesla Motors
Neither the
Securities and Exchange Commission nor any other regulatory body has approved or disapproved of these securities or passed upon the accuracy or adequacy of this prospectus. Any representation to the contrary is a criminal offense.
To the extent that the underwriter sells more than 5,300,000 shares of common stock, the underwriter has the option to purchase up to an
additional 795,000 shares from Tesla Motors at the offering price less the underwriting discount.
The underwriter expects to
deliver the shares against payment in New York, New York on or about , 2011.
Goldman, Sachs & Co.
Prospectus dated , 2011
Table of Contents
TABLE OF CONTENTS
Page
Prospectus Summary
The Offering
Summary Consolidated Financial Data
Risk Factors
11
Special Note Regarding Forward Looking Statements
52
Market, Industry and Other Data
53
Use of Proceeds
54
Price Range of Common Stock
55
Dividend Policy
56
Capitalization
57
Dilution
59
Selected Consolidated Financial Data
60
Management s Discussion and Analysis of Financial Condition and Results of
Operations
62
Business
102
Management
130
Executive Compensation
138
Certain Relationships and Related Party Transactions
161
Principal Stockholders
166
Description of Capital Stock
169
Shares Eligible for Future Sale
174
Material United States Tax Considerations for Non-United States Holders
176
Underwriting
179
Concurrent Private Placement
183
Legal Matters
184
Experts
184
Where You Can Find Additional Information
184
Index to Consolidated Financial Statements
F-1
You should rely
only on the information contained in this prospectus and in any free writing prospectus. Neither we nor the underwriter has authorized anyone to provide you with information different from that contained in this prospectus. We, and the underwriter,
are offering to sell, and seeking offers to buy, shares of our common stock only in jurisdictions where offers and sales are permitted. The information in this prospectus is accurate only as of the date of this prospectus, regardless of the time of
delivery of this prospectus or any sale of shares of our common stock.
Neither we nor the underwriter has done
anything that would permit this offering or possession or distribution of this prospectus in any jurisdiction where action for that purpose is required, other than in the United States. Persons outside the United States who come into possession of
this prospectus must inform themselves about, and observe any restrictions relating to, the offering of the shares of common stock and the distribution of this prospectus outside of the United States.
Table of Contents
PROSPECTUS SUMMARY
This summary highlights information contained elsewhere in this prospectus. You should read the following summary together with the
more detailed information appearing in this prospectus, including Selected Consolidated Financial Data, Management s Discussion and Analysis of Financial Condition and Results of Operations, Risk Factors,
Business and our consolidated financial statements and related notes before deciding whether to purchase shares of our capital stock. Unless the context otherwise requires, the terms Tesla Motors, Tesla, the
Company, we, us and our in this prospectus refer to Tesla Motors, Inc., and its subsidiaries, and the term Tesla store means Tesla retail locations as well as Tesla galleries where we show
potential customers our vehicles but do not consummate sales.
Overview
We design, develop, manufacture and sell high-performance fully electric vehicles and advanced electric vehicle powertrain components. We
own our sales and service network and have operationally structured our business in a manner that we believe will enable us to rapidly develop and launch advanced electric vehicles and technologies. We believe our vehicles, electric vehicle
engineering expertise, and operational structure differentiates us from incumbent automobile manufacturers.
We are the first
company to commercially produce a federally-compliant electric vehicle, the Tesla Roadster, which achieves a market-leading range on a single charge combined with attractive design, driving performance and zero tailpipe emissions. Our Tesla Roadster
offers impressive acceleration and performance without producing any tailpipe emissions. The Tesla Roadster s proprietary electric vehicle powertrain system is the foundation of our business and, with design enhancements, will also form the
basis for our Model S sedan, our Model X crossover and other future vehicles. The Model S, which is currently scheduled to begin customer deliveries in mid-2012, is in development with several drivable prototypes already complete. We expect the
Model S will be manufactured with an adaptable platform architecture upon which other future vehicles, including our Model X crossover, will be based. We currently plan to reveal a prototype of the Model X crossover by the end of 2011 followed by
the anticipated commercial introduction of this vehicle in the fourth quarter of 2013. We are designing the Model X to incorporate the functionality of a minivan with the consumer appeal of a sports utility vehicle.
In addition to developing our own vehicles, we provide services for the development of electric powertrain components and sell electric
powertrain components to other automotive manufacturers. We have provided development services to Daimler AG (Daimler) and are currently selling battery packs and chargers to Daimler for its Smart fortwo and A-Class electric vehicles. We also have a
development services agreement to produce a validated electric powertrain system for Toyota Motor Corporation (Toyota) for use in its RAV4 EV. Toyota anticipates bringing the RAV4 EV to market in the United States in 2012, and we are negotiating
with Toyota to finalize a separate agreement to supply production parts for that project; however, no agreement has yet been executed and there are no assurances that we will be able to enter into any such agreement.
The commercial production of a highway capable, fully electric vehicle that meets consumers range and performance expectations
required substantial design, engineering, and integration work on almost every system of our Tesla Roadster. Our roots in Silicon Valley have enabled us to recruit engineers with strong skills in electrical engineering, power electronics and
software engineering. We have complemented this talent base with automotive engineers with substantial expertise in vehicle engineering and manufacturing. Our ability to combine expertise in electric powertrain and vehicle engineering provides a
broad capability in electric vehicle design and systems integration. We believe these capabilities, coupled with our focus solely on electric vehicle technology as well as our strong inhouse engineering and manufacturing capacity, will enable us to
sustain the electric vehicle industry leadership we created through the production of the Tesla Roadster.
Table of Contents
We sell and service our Tesla Roadster though our company-owned sales and service
network and have opened 18 Tesla stores in the United States, Europe and Japan. Our intent is to offer a compelling customer experience while achieving operating efficiencies, better control costs of inventory, manage warranty service and pricing,
maintain and strengthen the Tesla brand, and obtain rapid customer feedback. Our Tesla stores do not carry large vehicle inventories and, as a result, do not require corresponding large floor spaces. We believe the benefits we receive from
distribution ownership, combined with our product design based on modularity and common platforms, will enable us to improve the speed of product development and improve the capital efficiency of our business. We believe that this approach provides
us with a competitive advantage as compared to incumbent automobile manufacturers.
Our first vehicle, the Tesla Roadster, can
accelerate from zero to 60 miles per hour in 3.9 seconds and has a maximum speed of approximately 120 miles per hour. The Roadster Sport version can accelerate from zero to 60 miles per hour in 3.7 seconds. The Tesla Roadster has a range of 245
miles on a single charge, as determined using the United States Environmental Protection Agency s (EPA s), combined two-cycle city/highway test. Recently, the EPA announced its intention to develop and establish new energy efficiency
testing methodologies for electric vehicles, which we believe could result in a significant decrease to the advertised ranges of all electric vehicles, including ours. The Tesla Roadster has a range that is almost double that of any other
commercially released electric vehicle and reportedly set a new world distance record of 313 miles on a single charge for a production electric car in a rally across Australia as part of the 2009 Global Green Challenge. The current effective price
of the base configuration of the Tesla Roadster is $101,500 in the United States, assuming and after giving effect to the continuation of a currently available United States federal tax credit of $7,500 for the purchase of alternative fuel vehicles.
The Tesla Roadster is currently in production, and as of March 31, 2011, we had delivered approximately 1,650 Tesla Roadsters to customers in over 31 countries, almost all of which were sold in North America and Europe. We currently intend to
end the production run of the Tesla Roadster in December 2011, but we will continue to sell the remaining inventory of Tesla Roadsters in the first half of 2012. To date, our customers have driven the Tesla Roadster for an estimated aggregate of
over 11.0 million miles. We have developed extensive software systems to manage the overall efficiency, safety and controls within our vehicles. Additionally, we have met battery shipping and testing protocols of the United Nations, United
States Department of Transportation and other government agencies, allowing us to ship the Tesla Roadster to a number of countries throughout the world.
We announced our second electric vehicle, the Model S, with the public exhibition of a drivable early prototype in March 2009. We have completed the construction of several drivable Model S alpha
prototypes, which are currently undergoing detailed testing. We currently plan to begin customer deliveries of the Model S in mid-2012. We are designing the Model S to be a four door, five-passenger premium sedan that offers exceptional
performance, functionality and attractive styling. As a fully electric vehicle, the Model S will produce zero tailpipe emissions while accelerating from zero to 60 miles per hour in a targeted time of approximately 6 seconds. We currently
anticipate that the base Model S will have an effective price of $49,900 in the United States with the standard 160 mile battery pack, assuming and after giving effect to the continuation of a United States federal tax credit of $7,500 for the
purchase of alternative fuel vehicles. Even without the tax credit, we believe the base list price will be competitive from a pricing perspective with other premium vehicles. We are designing the Model S to offer a variety of range options from
160 miles to 300 miles on a single charge, as projected using the EPA s combined two-cycle city/highway test. The EPA has announced its intention to develop and establish new energy efficiency testing methodologies for electric vehicles, which
we believe could result in a significant decrease to the advertised ranges of all electric vehicles, including ours.
We
anticipate that the initial units of the Model S will be introduced with a Signature Series which will have range capability of 300 miles and include certain colors and options, some of which may not be available in the general production of the
Model S. We also plan to offer the capability to fast charge in as little as 45 minutes and the ability to rapidly swap out its battery pack at commercial charging stations and/or specialized commercial
Table of Contents
battery exchange facilities, which capabilities we expect may be widely available in the future. We believe that the Model S will demonstrate our ability to produce increasingly affordable
electric vehicles that offer long-range capabilities and uncompromised performance, energy efficiency, convenience and design.
We are designing the Model S for a significantly broader customer base than the Tesla Roadster. Accordingly, we currently intend to
target an annual production rate of approximately 20,000 cars per year from our planned manufacturing facility in Fremont, California. The drivable early prototype of the Model S was exhibited to the public in March 2009. As of April 30,
2011, we had received approximately 4,600 customer reservations with a minimum refundable payment of $5,000.
We intend to
develop a substantially integrated electric vehicle manufacturing facility in Fremont, California for the manufacture of the Model S and its components. In October 2010, we completed the purchase of this facility from New United Motor Manufacturing,
Inc. (NUMMI). We intend to use the facility for the production of our Model S vehicle and to build our future electric vehicles. We have entered into a loan agreement with the United States Federal Financing Bank and United States Department of
Energy (DOE Loan Facility), to arrange loans for up to $465.0 million, $363.9 million of which is intended for the continued development of the Model S and the build out of our Fremont facility.
The electric powertrain we developed for the Tesla Roadster has provided the foundational technology for our Model S, our future
vehicles including the Model X crossover, and for electric powertrain components that we have begun selling to Daimler and its affiliates and that we intend to sell to Toyota. Our electric powertrain consists of the following: battery pack, power
electronics, motor, gearbox and the control software which enables the components to operate as a system. This design contains far fewer moving parts than a gasoline powertrain. These features enable us to adapt it for a variety of vehicle
applications. For example, using the existing Tesla Roadster battery pack, we have worked with Daimler since June 2008 to develop a battery pack and charger for an initial trial of the Smart fortwo electric drive vehicle pilot program. We have
expanded this business by developing and selling additional powertrain components to Daimler and Toyota, and have secured $101.2 million of an aggregate $465.0 million from our DOE Loan Facility to fund the infrastructure for these
powertrain activities. We believe that our efforts in our powertrain development will enable us to advance our technology and rapidly and cost effectively develop vehicles.
Our battery pack and electric powertrain system has enabled us to deliver market-leading range capability on the Tesla Roadster at what we believe is a compelling battery cost per kilowatt-hour. The
battery pack of the Tesla Roadster uses commercially available lithium-ion battery cells and contains 53 kilowatt-hours of usable energy, almost double the energy of any other commercially available electric vehicle battery pack, thereby
significantly increasing its range capability. Designing an electric powertrain and a vehicle to exploit its energy efficiency has required extensive safety testing and innovation in battery packs, motors, powertrain systems and vehicle engineering.
Our proprietary technology includes cooling systems, safety systems, charge balancing systems, battery engineering for vibration and environmental durability, customized motor design and the software and electronics management systems necessary to
manage battery and vehicle performance under demanding real-life driving conditions. These technology innovations have resulted in an extensive intellectual property portfolio as of March 31, 2011, we had 35 issued patents and
approximately 207 pending patent applications with the United States Patent and Trademark Office and internationally in a broad range of areas.
We are designing our vehicles to enable the cost effective development of our future vehicles. First, our battery pack is based on commodity battery cells placed in modules that we believe will form the
basis of later generations of our battery packs, such as those we are developing for the Model S. Second, we use upgradeable software extensively for managing vehicle performance and the driver experience. Finally, we are designing a common
platform architecture for the Model S, which compactly positions the battery pack, motor and other elements of our powertrain within the frame of the vehicle. We believe this architecture will form the basis of
Table of Contents
several future vehicles, including our planned Model X crossover vehicle, and enable us to efficiently and cost effectively launch these new vehicle models in the future.
Our design and vehicle engineering capabilities, combined with the technical advancements of our powertrain system, have enabled us to
design and develop zero tailpipe emission vehicles that we believe overcome the design, styling, and performance issues that we believe have historically limited broad consumer adoption of electric vehicles. As a result, we believe our Tesla
Roadster customers enjoy, and Model S customers will enjoy, several benefits, including:
Long Range and Recharging Flexibility. The range of the Tesla Roadster is almost double the range of any other commercially available electric
vehicle. We are designing the Model S to offer an even greater range option. In addition, the Tesla Roadster incorporates our proprietary on-board charging system, permitting recharging from almost any available electrical outlet, and we are
designing the Model S to offer fast charging capability from higher power electrical outlets. We believe the long-range and charging flexibility of our vehicles will help reduce consumer anxiety over range, alleviate the need for expensive,
large-scale charging infrastructure, and differentiate our vehicles as compared to our competitors currently announced electric vehicle product offerings.
Energy Efficiency and Cost of Ownership. We believe our Tesla Roadster offers and our Model S will offer consumers an attractive cost of
ownership when compared to similar internal combustion engine or hybrid electric vehicles. Using only a single electric powertrain enables us to create a lighter, more energy efficient vehicle that is mechanically simpler than currently available
hybrid or internal combustion engine vehicles. For example, assuming a 245 mile range of the Tesla Roadster, an average electricity cost of 11.2 cents per kilowatt-hour and an average gasoline price of $3.21 per gallon, which were the average
residential electricity cost and the gasoline price in the United States for February 2011 as reported by the U.S. Energy Information Administration of the U.S. Department of Energy, the cost per mile to fuel the Tesla Roadster is approximately 75%
less than the cost to fuel the 2009 Porsche 911 Carrera, which has an EPA mileage rating of 18 miles per gallon city and 25 miles per gallon highway. Furthermore, we expect our electric vehicles will have lower relative maintenance costs than
hybrid, plug-in hybrid, or internal combustion engine vehicles due to fewer moving parts and the absence of certain components, including oil, oil filters, spark plugs and engine valves. Additionally, government incentives that are currently
available can reduce the cost of ownership even further.
High-Performance Without Compromised Design or Functionality. We believe we have been able to successfully overcome the design and performance
tradeoff issues that encumbered most early electric vehicle designs. We believe the Tesla Roadster delivers an unparalleled driving experience with instantaneous and sustained acceleration through an extended range of speed. In addition, our
Model S is being designed to seat five adults, provide best in class storage in the trunk and hood while offering design and performance comparable to, or better than, other premium sedans.
We were incorporated in 2003 and began selling the Tesla Roadster in 2008. As of March 31, 2011, we had 1,010 employees worldwide.
Since inception through March 31, 2011, we had generated $292.5 million in revenue. As of March 31, 2011, we
had an accumulated deficit of $463.9 million and had experienced net losses of $82.8 million for the year ended December 31, 2008, $55.7 million for the year ended December 31, 2009, $154.3 million for the year ended
December 31, 2010, and $48.9 million for the three months ended March 31, 2011.
Table of Contents
Risks Affecting Us
Our business is subject to a number of risks and uncertainties that you should understand before making an investment decision. These risks are discussed more fully in the section entitled Risk
Factors following this prospectus summary. These include:
our limited operating history makes evaluating our business and future prospects difficult, and may increase the risk of your investment;
we anticipate that we will experience an increase in losses and will experience a decrease in automotive sales revenues prior to the launch of the
Model S;
our relationship with Toyota is subject to various risks which adversely affect our business and future prospects;
our production model for the non-powertrain portion of the Model S is unproven, still evolving and is very different from the non-powertrain
portion of the production model for the Tesla Roadster;
we may experience significant delays in the design, manufacture, launch and financing of the Model S, including in the build out of our
Model S manufacturing facility;
we have a history of losses and we expect significant increases in our costs and expenses to result in continuing losses for at least the foreseeable
future;
our future growth is dependent upon consumers willingness to adopt electric vehicles;
we are dependent upon our ability to fully draw down on our loan facility from the United States Department of Energy, which may restrict our ability
to conduct our business;
our distribution model is different from the predominant current distribution model for automobile manufacturers, which makes evaluating our business,
operating results and future prospects difficult; and
we are significantly dependent upon revenue generated from the sale of our electric vehicles, specifically the Tesla Roadster, in the near term, and
our future success will be dependent upon our ability to design and achieve market acceptance of new vehicle models, and, in particular, the Model S.
Corporate Information
We are headquartered in Palo Alto, California. Our
principal executive offices are located at 3500 Deer Creek Road, Palo Alto, California 94304, and our telephone number at this location is (650) 681-5000. Our website address is www.teslamotors.com. Information contained on our website is not
incorporated by reference into this prospectus and you should not consider information on our website to be part of this prospectus.
The Tesla Motors design logo, Tesla Motors, Tesla Roadster, Model S and other trademarks or service marks of Tesla Motors appearing in this prospectus
are the property of Tesla Motors. When used herein, the term Tesla store means Tesla retail locations as well as Tesla galleries where we show potential customers our vehicles but do not consummate sales. This prospectus contains
additional trade names, trademarks and service marks of other companies. We do not intend our use or display of other companies tradenames, trademarks or service marks to imply a relationship with, or endorsement or sponsorship of us by, these
other companies.
Table of Contents
THE OFFERING
Common stock we are offering
5,300,000 shares
Common stock sold by us in the concurrent private placement
Subsequent to the closing of this offering, Elon Musk will purchase directly from us in a private placement, 1,500,000 shares of our common stock, at the per share public offering price, for an
estimated aggregate purchase price of approximately $40 million. In addition, Blackstar Investco LLC, an affiliate of Daimler AG, will purchase directly from us in a private placement 577,000 shares of our common stock at the per share public
offering price, for an estimated aggregate purchase price of approximately $15.2 million (and up to an additional 67,475 shares if the underwriter exercises in full its option to purchase additional shares). The estimated purchase price assumes a
public offering price of $26.35 per share. We will receive the full proceeds and will not pay any underwriting discounts or commissions with respect to the shares that are sold in the private placement. The sales of these shares to Elon Musk
and Blackstar are not registered in this offering and the shares purchased by them, in addition to all other shares owned by them, will be subject to a lock-up of 90 days. We refer to the private placement of these shares of common stock as the
concurrent private placement.
Common stock to be outstanding after this offering and the concurrent private placement
102,931,840 shares (or 103,794,315 if the underwriter exercises in full its option to purchase additional shares)
Use of proceeds
We intend to use a portion of the net proceeds from this offering and the concurrent private placement to fund the development of our Model X crossover vehicle. We may also use a portion of
the net proceeds from this offering and the concurrent private placement for working capital and other general corporate purposes, including any unfunded amounts we need to pay to complete the production of the Model S and any remaining amounts that
we have agreed to spend under our loan facility with the United States Department of Energy, which we refer to herein as our DOE Loan Facility. Under our DOE Loan Facility, we have agreed to spend up to a total of $33 million plus any cost
overruns we may encounter in developing our Model S and our Model S manufacturing facility as well as any cost overruns we encounter in developing our powertrain facility. We currently anticipate that our total capital expenditures for the
remaining three quarters of 2011 and all of 2012, including for the Model S and Model X, will be in the range of $330 million to $370 million. We anticipate that most of the capital expenditures on the Model S will be funded by the DOE Loan
Facility. Our aggregate capital expenditures will also include funding the expansion of our Tesla stores. See Use of Proceeds.
Nasdaq Global Select Market symbol
TSLA
Table of Contents
The number of shares of common stock that will be outstanding after this offering is
based on the 95,554,840 shares outstanding as of March 31, 2011 and excludes:
14,654,270 shares of common stock issuable upon the exercise of options outstanding at March 31, 2011 at a weighted average exercise price of
$10.76 per share;
483,100 shares of common stock issuable upon exercise of options granted after March 31, 2011 at a weighted average exercise price of $26.58 per
share;
3,085,011 shares of common stock issuable upon the exercise of a warrant granted to the DOE in connection with the closing of our DOE Loan Facility in
January 2010, at an exercise price of $7.54 per share and 5,100 shares of common stock issuable upon the exercise of a warrant granted to the DOE in May 2010, at an exercise price of $8.94 per share (if we prepay our DOE Loan Facility in
full or in part, the total amount of shares exercisable under these warrants will be proportionately reduced); and
13,918,481 shares of common stock reserved for future issuance under our stock-based compensation plans, consisting of 11,415,533 shares of common
stock reserved for issuance under our 2010 Equity Incentive Plan and 2,502,948 shares of common stock reserved for issuance under our 2010 Employee Stock Purchase Plan and shares that become available under the 2010 Equity Incentive Plan and 2010
Employee Stock Purchase Plan pursuant to provisions thereof that automatically increase the share reserves under the plans each year, as more fully described in Management Employee Benefit Plans.
Unless otherwise indicated, all information in this prospectus assumes:
no exercise by the underwriter of its right to purchase up to an additional 795,000 shares of common stock from us; and
no purchase by Blackstar Investco LLC, an affiliate of Daimler AG, pursuant to its commitment to purchase up to 67,475 shares of our common stock if
the underwriter exercises its right to purchase up to an additional 795,000 shares of common stock from us in this offering.
Table of Contents
SUMMARY CONSOLIDATED FINANCIAL DATA
The following summary consolidated financial data for the years ended December 31, 2008, 2009 and 2010 are derived from our audited
consolidated financial statements that are included elsewhere in this prospectus. The summary unaudited consolidated financial data for the three months ended March 31, 2010 and 2011 and as of March 31, 2011 are derived from unaudited
consolidated financial statements for such periods and dates, which are included elsewhere in this prospectus. The unaudited consolidated financial statements were prepared on a basis consistent with our audited consolidated financial statements and
include, in the opinion of management, all adjustments necessary for the fair statement of the financial information contained in those statements. The historical results presented below are not necessarily indicative of financial results to be
achieved in future periods.
In June 2010, we identified an error related to the understatement in stock-based compensation
expense subsequent to the issuance of the consolidated financial statements for the year ended December 31, 2009. This error had the effect of understating selling, general and administrative expenses and net loss for the year ended
December 31, 2009 by $2.7 million. The error did not have an effect on the valuation of the stock options. As stock-based compensation expense is a non-cash item, there was no impact on net cash used in operating activities for the year ended
December 31, 2009. We determined that the impact of this error was not material and corrected the error by recording additional stock-based compensation expense of $2.4 million during the three months ended June 30, 2010. See Note 1
to our consolidated financial statements included elsewhere in this prospectus.
Prospective investors should read these
summary consolidated financial data together with Management s Discussion and Analysis of Financial Condition and Results of Operations and our consolidated financial statements and the related notes included elsewhere in this
prospectus.
Year Ended December 31,
Three Months Ended
March 31,
2008
2009
2010
2010
2011
(in thousands, except share and per share data)
Consolidated Statement of Operations Data:
Revenues:
Automotive sales
14,742
111,943
97,078
20,585
33,628
Development services
19,666
227
15,402
Total revenues
14,742
111,943
116,744
20,812
49,030
Cost of revenues(1):
Automotive sales
15,883
102,408
79,982
16,858
26,961
Development services
6,031
102
4,041
Total cost of revenues
15,883
102,408
86,013
16,960
31,002
Gross profit (loss)
(1,141
9,535
30,731
3,852
18,028
Operating expenses(1):
Research and development (net of development compensation of $23,249 for the year ended December 31, 2009)
53,714
19,282
92,996
13,265
41,162
Selling, general and administrative
23,649
42,150
84,573
16,585
24,212
Total operating expenses
77,363
61,432
177,569
29,850
65,374
Loss from operations
(78,504
(51,897
(146,838
(25,998
(47,346
Interest income
529
159
258
48
40
Interest expense
(3,747
(2,531
(992
(230
Other expense, net(2)
(963
(1,445
(6,583
(3,221
(1,485
Loss before income taxes
(82,685
(55,714
(154,155
(29,401
(48,791
Provision for income taxes
97
26
173
118
150
Net loss
(82,782
(55,740
(154,328
(29,519
(48,941
Net loss per share of common stock, basic and diluted(3)
(12.46
(7.94
(3.04
(4.04
(0.51
Shares used in computing net loss per share of common stock, basic and diluted(3)
6,646,387
7,021,963
50,718,302
7,301,940
95,187,345
Table of Contents
(1)
Includes stock-based compensation expense as follows:
Year Ended December 31,
Three Months Ended
March 31,
2008
2009
2010
2010
2011
(in thousands)
Cost of revenues
26
61
243
42
154
Research and development
125
376
4,139
281
2,299
Selling, general and administrative
286
997
16,774
3,064
3,473
Total
437
1,434
21,156
3,387
5,926
(2)
In January 2010, we issued a warrant to the DOE in connection with the closing of the DOE Loan Facility to purchase shares of our Series E convertible preferred
stock. This convertible preferred stock warrant became a warrant to purchase shares of our common stock upon the closing of our initial public offering (IPO). Beginning on December 15, 2018 and until December 14, 2022, the shares subject
to purchase under the warrant will become exercisable in quarterly amounts depending on the average outstanding balance of the DOE Loan Facility during the prior quarter. Since the number of shares of common stock ultimately issuable under the
warrant will vary, this warrant will be carried at its estimated fair value with changes in the fair value of this common stock warrant liability reflected in other income (expense), net, until its expiration or vesting. Potential shares of common
stock issuable upon exercise of the DOE warrant will be excluded from the calculation of diluted net loss per share of common stock until at least such time as we generate a net profit in a given period.
(3)
Our basic net loss per share of common stock is calculated by dividing the net loss by the weighted-average number of shares of common stock outstanding for the period.
The diluted net loss per share of common stock is computed by dividing the net loss by the weighted-average number of shares of common stock, excluding common stock subject to repurchase, and, if dilutive, potential shares of common stock
outstanding during the period. Potential shares of common stock consist of stock options to purchase shares of our common stock and warrants to purchase shares of our convertible preferred stock (using the treasury stock method) and the conversion
of our convertible preferred stock and convertible notes payable (using the if-converted method). For purposes of all these calculations, potential shares of common stock have been excluded from the calculation of diluted net loss per share of
common stock as their effect is antidilutive since we generated a net loss in each period.
Our consolidated
balance sheet data as of March 31, 2011 is presented:
on an actual basis; and
on an as adjusted basis to give effect to (i) the sale of 5,300,000 shares of common stock by us in this offering at the assumed offering price of
$26.35 per share, which is the closing price of our common stock on May 18, 2011, and after deducting estimated underwriting discounts and commissions and estimated offering expenses payable by us; and (ii) the sale of 2,077,000 shares of
common stock to be purchased directly by Mr. Elon Musk and Blackstar at such price in the concurrent private placement.
As of March 31, 2011
Actual
As
Adjusted(1)
(Unaudited)
(in thousands)
Consolidated Balance Sheet Data:
Cash and cash equivalents
100,655
292,605
Restricted cash(2)
47,877
47,877
Property and equipment, net
143,372
143,372
Working capital
113,930
305,880
Total assets
407,289
599,239
Common stock warrant liability
7,509
7,509
Capital lease obligations, less current portion
421
421
Long-term debt(3)
102,484
102,484
Total stockholders equity
167,738
359,688
(1)
Each $1.00 increase or decrease in the assumed offering price of $26.35 per share would increase or decrease, as applicable, our cash and cash
equivalents, working capital, total assets and total stockholders
Table of Contents
equity by approximately $7.3 million, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and after deducting the estimated
underwriting discounts and commissions and estimated offering expenses payable by us. Our as adjusted amounts exclude $8.7 million in additional funds borrowed under our DOE Loan Facility in April 2011.
(2)
The restricted cash represents primarily the portion of the proceeds from our IPO that we are required to hold in a separate dedicated account pursuant to our DOE Loan
Facility to fund certain costs of our powertrain and Model S manufacturing facility projects. Restricted cash also includes security deposits related to lease agreements, equipment financing, as well as security held by a vendor as part of the
vendor s standard credit policies.
(3)
On January 20, 2010, we entered into a loan agreement with the United States Federal Financing Bank, or the FFB, and the DOE, pursuant to the Advanced Technology
Vehicles Manufacturing Incentive Program, or the ATVM Program. Under such facility, the FFB has made available to us two multi-draw term loan facilities in an aggregate principal amount of up to $465.0 million. Up to an aggregate principal amount of
$101.2 million will be made available under the first term loan facility to finance up to 80% of the costs eligible for funding under the ATVM Program for the build out of a facility to design and manufacture lithium-ion battery packs, electric
motors and electric components. Up to an aggregate principal amount of $363.9 million will be made available under the second term loan facility to finance up to 80% of the costs eligible for funding under the ATVM Program for the development
of, and to build out the manufacturing facility for the Model S sedan. See the section titled Business Governmental Programs, Incentives and Regulations United States Department of Energy Loans below for additional
information.
10
Table of Contents
RISK FACTORS
You should carefully consider the risks described below together with the other information set forth in this prospectus, which could
materially affect our business, financial condition and future results. The risks described below are not the only risks facing our company. Risks and uncertainties not currently known to us or that we currently deem to be immaterial also may
materially adversely affect our business, financial condition and operating results.
Risks Related to Our Business and Industry
Our limited operating history makes evaluating our business and future prospects difficult, and may increase the
risk of your investment.
You must consider the risks and difficulties we face as an early stage company with limited
operating history. If we do not successfully address these risks, our business, prospects, operating results and financial condition will be materially and adversely harmed. We were formed in July 2003. We began delivering our first performance
electric vehicle, the Tesla Roadster, in early 2008, and as of March 31, 2011, we had only sold approximately 1,650 production vehicles to customers, almost all of which were sold in the United States and Europe. Our revenues for the years
ended December 31, 2008, 2009, 2010 and the three months ended March 31, 2010 and 2011 were $14.7 million, $111.9 million, $116.7 million, $20.8 million and $49.0 million, respectively. We have a very limited operating
history on which investors can base an evaluation of our business, operating results and prospects.
To date, we have derived
our revenues principally from sales of the Tesla Roadster and related sales of zero emission vehicle credits, and from electric powertrain development services and sales. We intend in the longer term to derive substantial revenues from the sales of
our Model S sedan and future electric vehicles, including our Model X crossover vehicle. The Model S is in development and we do not expect to start delivering to customers until mid-2012. We have no operating history with respect to the
Model S electric vehicle and have not yet fully completed the component procurement process for the Model S, which limits our ability to accurately forecast the cost of the vehicle. Further, we have not yet produced a prototype of the
Model X crossover vehicle and do not expect this vehicle to be available for sale before the fourth quarter of 2013 at the earliest. In addition, we only recently completed the purchase of a manufacturing facility in Fremont, California to produce
such vehicles, and we have not yet completely finalized the full vehicle design or our engineering, manufacturing or component supply plans for the Model S. In addition, our powertrain sales, development services revenue and powertrain research
and development compensation have been almost entirely generated under arrangements with Daimler AG (Daimler) for the development and sale of a battery pack and charger for Daimler s Smart fortwo electric drive and for the development of a
battery pack for Daimler s A-Class vehicle as well as with Toyota Motor Corporation (Toyota) for the development of a validated powertrain system which will be integrated into an electric vehicle version of the Toyota RAV4. Blackstar Investco
LLC (Blackstar), an affiliate of Daimler, holds more than 5% of our outstanding capital stock. In October 2010, Tesla and Toyota entered into an agreement to develop a validated electric powertrain for the Toyota RAV4. Toyota also purchased
2,941,176 shares of our common stock in a private placement transaction that occurred concurrently with the closing of our IPO. We have also announced our intention for Tesla to receive Toyota s support with sourcing parts and production and
engineering expertise for the Model S. However, we have not entered into any agreements with Toyota for any such assistance, including any purchase orders, and we may never do so. There are no assurances that we will be able to secure future
business with Daimler, Toyota, or any of their affiliates.
It is difficult to predict our future revenues and appropriately
budget for our expenses, and we have limited insight into trends that may emerge and affect our business. For example, during the four quarters of 2009 and 2010, we recorded quarterly revenue of as much as $45.5 million and as little as
$18.6 million and quarterly operating losses of as much as $51.6 million and as little as $4.3 million. In the event that actual results differ from our estimates or we adjust our estimates in future periods, our operating results and
financial position could be materially affected.
11
Table of Contents
In addition, our revenues to date have included amounts we receive from selling zero
emission vehicle (ZEV) credits to other automobile manufacturers, pursuant to certain state regulations. We have entered into two contracts for the sale of ZEV credits with two separate automotive manufacturers. For the three months ended
March 31, 2010 and 2011, we earned revenue from the sale of ZEV credits of $0.5 million and $0.6 million, respectively. Our current agreement with American Honda Co., Inc. (Honda) provides for the sale of ZEV credits that we earn from the sale
of vehicles that we manufacture through December 31, 2011. As of March 31, 2011, we had sold credits for 521 vehicles under this agreement and Honda has an obligation to purchase credits for up to 135 additional vehicles that Tesla
manufactures prior to the expiration of the agreement. We may not be able to enter into new agreements to sell any additional credits we may earn in excess of the current contractual amounts on equivalent terms and if this occurs, our financial
results will be harmed.
We are significantly dependent upon revenue generated from the sale of our electric vehicles,
specifically the Tesla Roadster, in the near term, and our future success will be dependent upon our ability to design and achieve market acceptance of new vehicle models, and specifically the Model S.
We currently generate a significant percentage of our revenue from the sale of our Tesla Roadsters. We began production of our Tesla
Roadster in 2008 and will end the production run of the Tesla Roadster in December 2011. Beyond 2011, our sales of new Tesla Roadsters will be limited to any vehicles available from our 2011 production.
Our second planned vehicle, our Model S, is not expected to be in production until mid-2012, requires significant investment prior
to commercial introduction, and may never be successfully developed or commercially successful. There can be no assurance that we will be able to design future models of performance electric vehicles that will meet the expectations of our customers
or that our future models, including the Model S, will become commercially viable. In particular, it is common in the automotive industry for the production vehicle to have a styling and design different from that of the concept vehicle, which
may happen with the Model S. We believe the design of the early prototype Model S is one of the key reasons why we have received approximately 4,600 reservations for the vehicle as of April 30, 2011. To the extent that we are not able
to build the production Model S to the expectations created by the early prototype and our anticipated specifications, customers may cancel their reservations and our future sales could be harmed. Additionally, historically, automobile
customers have come to expect new and improved vehicle models to be introduced frequently. In order to meet these expectations, we may in the future be required to introduce on a regular basis new vehicle models as well as enhanced versions of
existing vehicle models. As technologies change in the future for automobiles in general and performance electric vehicles specifically, we will be expected to upgrade or adapt our vehicles and introduce new models in order to continue to provide
vehicles with the latest technology. To date, we have limited experience simultaneously designing, testing, manufacturing and selling our electric vehicles.
We anticipate that we will experience an increase in losses and will experience a decrease in automotive sales revenues prior to the launch of the Model S.
Prior to the launch of our Model S, we anticipate our automotive sales may decline, potentially significantly. We currently produce
the Tesla Roadster gliders, which are partially assembled vehicles that do not contain our electric powertrain, with Lotus Cars Limited (Lotus) in Hethel, England. We currently intend to manufacture gliders with Lotus for our current generation
Tesla Roadster until December 2011. We intend to use these gliders in the manufacturing of the Tesla Roadster to both fulfill orders placed in 2011 as well as new orders placed in 2012 until our supply of gliders is exhausted. Through March 31,
2011, we have delivered approximately 1,650 vehicles, leaving approximately 750 vehicles left to sell. As a result, we anticipate that we will generate limited revenue from selling electric vehicles in 2012 until the launch of our Model S. The
launch of our Model S could be delayed for a number of reasons and any such delays may be significant and would extend the period in which we would generate limited revenues from sales of our electric vehicles. The potential decrease in
automotive
12
Table of Contents
sales revenue for the periods prior to the launch of the Model S may be significant and could materially and adversely affect our business, prospects, operating results and financial
condition and our ability to fund operating losses could seriously constrain our growth.
Furthermore, except for our
arrangements with Daimler and its affiliates, we do not currently have any arrangements in place with third parties for the purchase of powertrain components. There are no assurances that we will be able to secure future business with Daimler or its
affiliates as Daimler has indicated its intent to produce all of its lithium-ion batteries by 2012 through Deutsche Accumotive GmbH & Co. KG, an entity affiliated with Daimler, and has announced it has entered into a joint venture with BYD
Auto to collaborate on the development of an electric car under a jointly owned new brand for the Chinese market. We do not have any signed agreements for powertrain component sales after 2011.
Our relationship with Toyota is subject to various risks which could adversely affect our business and future prospects.
In October 2010, we and Toyota entered into an agreement to develop a validated electric powertrain for the Toyota
RAV4. We have also previously announced our intention for Tesla to receive Toyota s support with sourcing parts and production and engineering expertise for the Model S. However, we have not entered into any agreements with
Toyota for any such assistance or for any commercial supply, and we may never do so. Moreover, even were we to enter into such agreement, in all likelihood such agreement would not contain binding purchase commitments. There are no assurances
we will be able to enter into any further agreements with Toyota for a long-term supply of electric powertrains for the Toyota RAV4, or any other vehicles.
Our production model for the non-powertrain portion of the Model S is unproven, still evolving and is very different from the non-powertrain portion of the production model for the Tesla
Roadster.
Our future business depends in large part on our ability to execute on our plans to develop, manufacture,
market and sell our Model S electric vehicle. To date, our revenues have been principally derived from the sales of our Tesla Roadster. The Tesla Roadster has only been produced in low volume quantities and the body is assembled by Lotus in the
United Kingdom, with the final assembly by us at our facility in Menlo Park, California for sales destined in the United States. We plan to manufacture the Model S in higher volumes than our present production capabilities in our planned
manufacturing facility in Fremont, California. As a result, the non-powertrain portion of the production model for the Model S will be substantially different and significantly more complex than the non-powertrain portion of the production
model for the Tesla Roadster. In addition, we plan to introduce a number of new manufacturing technologies and techniques, such as aluminum spot welding systems, which have not been widely adopted in the automotive industry. Our Model S
production model will require significant investments of cash and management resources and we may experience unexpected delays or difficulties that could postpone our ability to launch or achieve full manufacturing capacity for the Model S,
which could have a material adverse effect on our business, prospects, operating results and financial condition.
Our
production model for the Model S is based on many key assumptions, which may turn out to be incorrect, including:
that we will be able to secure the funding necessary to build out and equip our planned manufacturing facility in Fremont, California in a timely
manner, including meeting milestones and other conditions necessary to draw down funds under our loan facility with the United States Department of Energy (DOE);
that we will be able to develop and equip our planned manufacturing facility for the Model S in Fremont, California without exceeding our
projected costs and on our projected timeline;
that the equipment which we have purchased or which we select will be able to accurately manufacture the vehicle within specified design tolerances;
13
Table of Contents
that our computer aided design process can reduce the product development time by accurately predicting the performance of our vehicle for passing
relevant safety standards, including standards that can only be met through expensive crash testing;
that we will be able to comply with environmental, workplace safety and similar regulations to operate our planned manufacturing facilities and our
business on our projected timeline;
that we will be able to engage suppliers for the necessary components on terms and conditions acceptable to us and that we will be able to obtain
components on a timely basis and in the necessary quantities and at acceptable prices;
that we will be able to deliver final component designs to our suppliers in a timely manner;
that we will be able to attract, recruit, hire and train skilled employees, including employees on the production line, to operate our Model S
manufacturing facility in Fremont, California;
that we will be able to maintain high quality controls as we transition to an in-house manufacturing process; and
that we will not experience any significant delays or disruptions in our supply chain.
If one or more of the foregoing assumptions turns out to be incorrect, our ability to successfully launch the Model S on time and on
budget if at all, and our business prospects, operating results and financial condition may be materially and adversely impacted.
We have no experience to date in high volume manufacturing of our electric vehicles. We do not know whether we will be able to develop efficient, automated, low-cost manufacturing capability and
processes, and reliable sources of component supply that will enable us to meet the quality, price, engineering, design and production standards, as well as the production volumes required to successfully mass market the Model S. Even if we are
successful in developing our high volume manufacturing capability and processes and reliable sources of component supply, we do not know whether we will be able to do so in a manner that avoids significant delays and cost overruns, including as a
result of factors beyond our control such as problems with suppliers and vendors, or in time to meet our vehicle commercialization schedules or to satisfy the requirements of customers. To date, we have experienced cost increases from certain of our
suppliers in order to meet our quality targets and development timelines. Any failure to develop such manufacturing processes and capabilities within our projected costs and timelines could have a material adverse effect on our business, prospects,
operating results and financial condition.
We may experience significant delays in the design, manufacture, launch and
financing of the Model S, including in the build out of our Model S manufacturing facility, which could harm our business and prospects.
Any delay in the financing, design, manufacture and launch of the Model S, including in the build out of our Model S manufacturing facility in Fremont, California, could materially damage our
brand, business, prospects, financial condition and operating results. Automobile manufacturers often experience delays in the design, manufacture and commercial release of new vehicle models. We experienced significant delays in launching the Tesla
Roadster. We initially announced that we would begin delivering the Tesla Roadster in June 2007, but due to various design and production delays, we did not physically deliver our first Tesla Roadster until February 2008, and we only achieved higher
production of this vehicle in the fourth quarter of 2008. These delays resulted in additional costs and adverse publicity for our business. We may experience similar delays in launching the Model S, and any such delays could be significant.
In addition, final designs for the Model S and plans for the build out of the manufacturing facility are still in
process, and various aspects of the Model S component procurement and manufacturing plans have not yet been determined. We are currently evaluating, qualifying and selecting certain remaining suppliers for the planned
14
Table of Contents
production of the Model S. However, we may not be able to engage suppliers for the remaining components in a timely manner, at an acceptable price or in the necessary quantities. In
addition, we will also need to do extensive testing to ensure that the Model S is in compliance with applicable National Highway Traffic Safety Administration (NHTSA) safety regulations and United States Environmental Protection Agency (EPA)
and California Air Resources Board (CARB) emission regulations prior to beginning mass production and delivery of the vehicles. Our plan to begin production of the Model S in mid-2012 is dependent upon the timely availability of funds, upon our
finalizing the related design, engineering, component procurement, testing, build out and manufacturing plans in a timely manner and upon our ability to execute these plans within the current timeline.
We completed the purchase of our planned manufacturing facility in Fremont, California in October 2010 and selected it in part because it
was recently used for automobile manufacturing, was located within 20 miles of our Palo Alto engineering facility, and we believe its size may allow us to adapt our internal manufacturing plans quickly. We expect that all these factors will support
the timely start of production for the Model S. However, because we have only recently acquired this facility and have just begun to implement our manufacturing plans, we may experience unexpected delays in completing the build out of this
facility for the production of our Model S.
In January 2010, we entered into a loan facility with the Federal Financing
Bank (FFB) that is guaranteed by the DOE (DOE Loan Facility). Our DOE Loan Facility provides for a $465.0 million loan facility under the DOE s Advanced Technology Vehicles Manufacturing Loan Program (ATVM Program) to help finance the
continued development of the Model S, including the planned build out and operation of a manufacturing facility, and to finance the planned build out and operation of our electric powertrain manufacturing facility. We intend to fund the build
out of the planned manufacturing facility principally by using existing cash and cash obtained through the DOE Loan Facility. Our ability to draw down these funds under the DOE Loan Facility is conditioned upon several draw conditions. These draw
conditions include our achievement of progress milestones relating to the design and development of the Model S and the Model S manufacturing facility as well as financial covenants. If we are unable to draw down the anticipated funds
under the DOE Loan Facility on the timeline that we anticipate, our plans for building our Model S and electric powertrain manufacturing plants could be significantly delayed which would materially adversely affect our business, prospects,
financial condition and operating results.
We face significant barriers in our attempt to produce our Model S, and
if we cannot successfully overcome those barriers our business will be negatively impacted.
We face significant
barriers as we attempt to produce our first mass produced vehicle, our Model S. We currently have a drivable early prototype of the Model S, but do not have a full production intent prototype, a final design, a built-out manufacturing
facility or manufacturing processes. The automobile industry has traditionally been characterized by significant barriers to entry, including large capital requirements, investment costs of designing and manufacturing vehicles, long lead times to
bring vehicles to market from the concept and design stage, the need for specialized design and development expertise, regulatory requirements and establishing a brand name and image and the need to establish sales and service locations. As a
manufacturer and seller of only electric vehicles, we face a variety of added challenges to entry that a traditional automobile manufacturer would not encounter including additional costs of developing and producing an electric powertrain that has
comparable performance to a traditional gasoline engine in terms of range and power, inexperience with servicing electric vehicles, regulations associated with the transport of lithium-ion batteries and unproven high-volume customer demand for fully
electric vehicles. In addition, while we are designing the Model S to have the capability to rapidly swap out its battery pack, there are no specialized facilities today to perform such swapping. Also, while we expect to be able to achieve a
300 mile range, our ability to do so will depend on the feasibility and availability of appropriate battery cell technologies and improvements that we are able to achieve in reducing energy consumption. While we may offer this service in the future
at our stores, no assurance can be provided that we will do so, or that any other third party will offer such services. We must successfully overcome these barriers as we move from producing the low volume Tesla Roadster to the Model S which we
plan to produce at
15
Table of Contents
much higher volumes. If we are not able to overcome these barriers, our business, prospects, operating results and financial condition will be negatively impacted and our ability to grow our
business will be harmed.
We have a history of losses and we expect significant increases in our costs and expenses to
result in continuing losses for at least the foreseeable future.
We incurred a net loss of $48.9 million for the
three months ended March 31, 2011 and have accumulated net losses of $463.9 million from our inception through March 31, 2011. We have had net losses in each quarter since our inception. We believe that we will continue to incur
operating and net losses each quarter until at least the time we begin significant deliveries of the Model S, which is not expected to be in production until mid-2012 with higher volume production not occurring until 2013, and may occur later.
Even if we are able to successfully develop the Model S, there can be no assurance that it will be commercially successful. If we are to ever achieve profitability it will be dependent upon the successful development and successful commercial
introduction and acceptance of automobiles such as the Model S, which may not occur.
We expect the rate at which we will
incur losses to increase significantly in future periods from current levels as we:
design, develop and manufacture our Model S and our planned Model X crossover;
design, develop and manufacture components of our electric powertrain;
develop and equip our manufacturing facility to produce our Model S in Fremont, California;
build up inventories of parts and components for our Model S;
develop and equip manufacturing facilities to produce our electric powertrain components;
open new Tesla stores;
expand our design, development, maintenance and repair capabilities;
increase our sales and marketing activities; and
increase our general and administrative functions to support our growing operations.
Because we will incur the costs and expenses from these efforts before we receive any incremental revenues with respect thereto, our
losses in future periods will be significantly greater than the losses we would incur if we developed our business more slowly. In addition, we may find that these efforts are more expensive than we currently anticipate or that these efforts may not
result in increases in our revenues, which would further increase our losses.
In addition, as of March 31, 2011, we had
recorded a full valuation allowance on our United States net deferred tax assets as at this point we believe it is more likely than not that we will not achieve profitability and accordingly be able to use our deferred tax assets in the foreseeable
future. Federal and state laws impose substantial restrictions on the utilization of net operating loss and tax credit carry-forwards in the event of an ownership change, as defined in Section 382 of the Internal Revenue Code.
Although we do not believe that our IPO constituted, or this offering will constitute, an ownership change resulting in limitations on our ability to use our net operating loss and tax credit carry-forwards, we have not yet performed a study to
determine whether such limitations exist. If an ownership change is deemed to have occurred as a result of our IPO or this offering, utilization of these assets could be significantly reduced.
16
Table of Contents
If we are unable to adequately control the costs associated with operating our
business, including our costs of manufacturing, sales and materials, our business, financial condition, operating results and prospects will suffer.
If we are unable to maintain a sufficiently low level of costs for designing, manufacturing, marketing, selling and distributing and servicing our electric vehicles relative to their selling prices, our
operating results, gross margins, business and prospects could be materially and adversely impacted. We have made, and will be required to continue to make, significant investments for the design, manufacture and sales of our electric vehicles. When
we first began delivering our Tesla Roadster in early 2008, our marginal costs of producing the Tesla Roadster exceeded our revenue from selling those vehicles. Revenue from the sales of our Tesla Roadster as well as from ZEV credits did not exceed
cost of revenues related to our Tesla Roadster, until the second quarter of 2009. There can be no assurances that our costs of producing and delivering the Model S will be less than the revenue we generate from sales at the time of the
Model S launch or that we will achieve our expected gross margin on sales of the Model S.
We incur significant
costs related to procuring the raw materials required to manufacture our high-performance electric cars, assembling vehicles and compensating our personnel. We will also incur substantial costs in constructing and building out our Model S and
powertrain manufacturing facilities, each of which could potentially face cost overruns or delays in construction. Additionally, in the future we may be required to incur substantial marketing costs and expenses to promote our vehicles, including
through the use of traditional media such as television, radio and print, even though our marketing expenses to date have been relatively limited. If we are unable to keep our operating costs aligned with the level of revenues we generate, our
operating results, business and prospects will be harmed. Many of the factors that impact our operating costs are beyond our control. For example, the costs of our raw materials and components, such as lithium-ion battery cells or carbon fiber and
aluminum body panels used in our vehicles, could increase due to shortages as global demand for these products increases. Indeed, if the popularity of electric vehicles exceeds current expectations without significant expansion in battery cell
production capacity and advancements in battery cell technology, shortages could occur which would result in increased materials costs to us.
We are dependent on our suppliers, a significant number of which are single or limited source suppliers, and the inability of these suppliers to continue to deliver, or their refusal to deliver,
necessary components of our vehicles at prices and volumes acceptable to us would have a material adverse effect on our business, prospects and operating results.
The Tesla Roadster uses over 2,000 purchased parts, which we source globally from over 150 suppliers, many of whom are currently single source suppliers for these components. While we obtain components
from multiple sources whenever possible, similar to other automobile manufacturers, many of the components used in our vehicles are purchased by us from a single source. We refer to these component suppliers as our single source suppliers. To date
we have not qualified alternative sources for most of the single sourced components used in our vehicles and we generally do not maintain long-term agreements with our single source suppliers.
While we believe that we may be able to establish alternate supply relationships and can obtain or engineer replacement components for
our single source components, we may be unable to do so in the short term or at all at prices or costs that are favorable to us. In particular, while we believe that we will be able to secure alternate sources of supply for almost all of our single
sourced components on a relatively short time frame, qualifying alternate suppliers or developing our own replacements for certain highly customized components of the Tesla Roadster, such as the carbon fiber body panels, which are supplied to us by
Sotira 35, a unit of Sora Composites Group, may be time consuming and costly.
In addition, Lotus is the only manufacturer for
certain components, such as the chassis of our Tesla Roadster. We therefore refer to it as a sole source supplier. Replacing the components from Lotus that are sole sourced may require us to reengineer our vehicles, which would be time consuming and
costly. We do not currently utilize any sole source suppliers other than Lotus.
17
Table of Contents
This supply chain exposes us to multiple potential sources of delivery failure or component
shortages for the Tesla Roadster, our powertrain component sales activities and the Model S. For example, earthquakes similar to the one that occurred in Japan in March 2011 could negatively impact our supply chain. We are currently evaluating,