UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

AMENDMENT

NO. 3

TO

FORM S-1

REGISTRATION STATEMENT

UNDER

THE SECURITIES ACT OF 1933

Tesla Motors,

Inc.

(Exact name of Registrant as specified in its charter)

Delaware

3711

91-2197729

(State or other jurisdiction of

incorporation or organization)

(Primary Standard Industrial

Classification Code Number)

(I.R.S. Employer

Identification Number)

3500 Deer Creek Road

Palo Alto, California 94304

(650) 681-5000

(Address, including zip code, and telephone number, including area code, of Registrant s principal executive offices)

Elon Musk

Chief Executive Officer

Tesla Motors, Inc.

3500 Deer Creek Road

Palo Alto, California 94304

(650) 681-5000

(Name, address, including zip code, and telephone number, including area code, of agent for service)

Copies to:

Larry W. Sonsini

David J. Segre

Mark B. Baudler

Wilson Sonsini Goodrich & Rosati, P.C.

650 Page Mill Road

Palo Alto, California 94304

(650) 493-9300

Kevin P. Kennedy

Simpson Thacher & Bartlett LLP

2550 Hanover Street

Palo Alto, California 94304

(650) 251-5000

Approximate

date of commencement of proposed sale to the public: As soon as practicable after this Registration Statement becomes effective.

If any of the

securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act, check the following box.

If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, please

check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.

If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list

the Securities Act registration statement number of the earlier effective registration statement for the same offering.

If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the

Securities Act registration statement number of the earlier effective registration statement for the same offering.

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller

reporting company. See the definitions of large accelerated filer, accelerated filer and smaller reporting company in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer

Accelerated filer

Non-accelerated filer

(Do not check if a smaller reporting company)

Smaller reporting company

The

Registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until the Registrant shall file a further amendment which specifically states that this Registration Statement shall

thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933 or until the Registration Statement shall become effective on such date as the Commission acting pursuant to said Section 8(a) may determine.

Table of Contents

The information in this preliminary prospectus is not complete and may be changed. These securities

may not be sold until the registration statement filed with the Securities and Exchange Commission is effective. This preliminary prospectus is not an offer to sell nor does it seek an offer to buy these securities in any jurisdiction where the

offer or sale is not permitted.

SUBJECT TO COMPLETION, DATED MAY 27, 2010

Shares

Common Stock

This is an initial public offering of shares of common stock of Tesla Motors, Inc.

Tesla Motors is offering of the shares to be sold in the

offering. The selling stockholders identified in this prospectus are offering an additional shares. Tesla Motors will not receive any of the proceeds from the sale of the

shares being sold by the selling stockholders.

Prior to this offering, there has been no public market for the common stock.

It is currently estimated that the initial public offering price per share will be between $ and $ .

Application has been made for listing on The Nasdaq Global Market under the symbol TSLA .

See the section entitled Risk Factors on page 14 to read about factors you should consider

before buying shares of the common stock.

Neither the

Securities and Exchange Commission nor any other regulatory body has approved or disapproved of these securities or passed upon the accuracy or adequacy of this prospectus. Any representation to the contrary is a criminal offense.

Per Share

Total

Initial public offering price

Underwriting discount

Proceeds, before expenses, to Tesla Motors

Proceeds, before expenses, to the selling stockholders

To the

extent that the underwriters sell more than shares of common stock, the underwriters have the option to purchase up to an additional

shares from the selling stockholders at the initial public offering price less the underwriting discount.

The underwriters expect to deliver the shares against payment in New York, New York on

, 2010.

Goldman, Sachs & Co.

Morgan Stanley

J.P. Morgan

Deutsche Bank Securities

Prospectus dated

, 2010

Table of Contents

Table of Contents

Table of Contents

Table of Contents

TABLE OF CONTENTS

Page

Prospectus Summary

The Offering

Summary Consolidated Financial Data

11

Risk Factors

14

Special Note Regarding Forward Looking Statements

56

Market, Industry and Other Data

56

Use of Proceeds

57

Dividend Policy

59

Capitalization

60

Dilution

62

Selected Consolidated Financial Data

64

Management s Discussion and Analysis of Financial Condition and Results of

Operations

66

Business

104

Management

138

Executive Compensation

146

Certain Relationships and Related Party Transactions

167

Principal and Selling Stockholders

173

Description of Capital Stock

178

Shares Eligible for Future Sale

183

Material United States Tax Considerations for Non-United States Holders

186

Underwriting

189

Concurrent Private Placement

194

Legal Matters

195

Experts

195

Where You Can Find Additional Information

195

Index to Consolidated Financial Statements

F-1

You should

rely only on the information contained in this prospectus and in any free writing prospectus. We, the underwriters and the selling stockholders have not authorized anyone to provide you with information different from that contained in this

prospectus. We, the underwriters and the selling stockholders are offering to sell, and seeking offers to buy, shares of our common stock only in jurisdictions where offers and sales are permitted. The information in this prospectus is accurate only

as of the date of this prospectus, regardless of the time of delivery of this prospectus or any sale of shares of our common stock.

Neither we, the selling stockholders, nor any of the underwriters have done anything that would permit this offering or possession or

distribution of this prospectus in any jurisdiction where action for that purpose is required, other than in the United States. Persons outside the United States who come into possession of this prospectus must inform themselves about, and observe

any restrictions relating to, the offering of the shares of common stock and the distribution of this prospectus outside of the United States.

Table of Contents

PROSPECTUS SUMMARY

This summary highlights information contained elsewhere in this prospectus. You should read the following summary together with the

more detailed information appearing in this prospectus, including Selected Consolidated Financial Data, Management s Discussion and Analysis of Financial Condition and Results of Operations, Risk Factors,

Business and our consolidated financial statements and related notes before deciding whether to purchase shares of our capital stock. Unless the context otherwise requires, the terms Tesla Motors, Tesla, the

Company, we, us and our in this prospectus refer to Tesla Motors, Inc., and its subsidiaries and Tesla store means Tesla retail locations as well as Tesla galleries where we show potential

customers our vehicles but do not consummate sales.

Overview

We design, develop, manufacture and sell high-performance fully electric vehicles and advanced electric vehicle powertrain components. We

have intentionally departed from the traditional automotive industry model by both exclusively focusing on electric powertrain technology and owning our vehicle sales and service network. We are the first and currently only company to commercially

produce a federally-compliant highway-capable electric vehicle, the Tesla Roadster, which combines a market-leading range on a single charge with attractive design, driving performance and zero tailpipe emissions. Introducing the Tesla Roadster

required us to develop a proprietary electric powertrain that incorporates four key components an advanced battery pack, power electronics module, high-efficiency motor and extensive control software. We believe our core intellectual property

contained within our electric powertrain will form the foundation for our planned future vehicles. Since our team combines the innovation and speed to market characteristics of Silicon Valley firms with the experience of leading automotive

companies, we believe that we will be able to rapidly and cost effectively introduce additional vehicles, such as our planned Tesla Model S sedan, and stay at the forefront of the electric automobile industry.

We operate in a fundamentally different manner and structure than traditional automobile manufacturers to pursue what we believe is a

historic opportunity to create an integrated company which successfully commercializes electric vehicles without compromising on range, performance or styling. In addition to designing and manufacturing our vehicles, we sell and service them

through our own sales and service network. This is different from the incumbent automobile companies in the United States who typically franchise their sales and service. We believe our approach will enable us to operate more cost effectively,

provide a better experience for our customers and incorporate customer feedback more quickly into our product development and manufacturing processes. We are continuing to expand our distribution network globally and as of May 25, 2010,

operated 11 Tesla stores in North America and Europe.

The Tesla Roadster, our first vehicle, showcases our technology

and illustrates our leadership in electric vehicle innovation. Introduced in 2008, the Tesla Roadster can accelerate from zero to 60 miles per hour in 3.9 seconds and produces zero tailpipe emissions. The Tesla Roadster has a battery pack capable of

storing approximately 53 kilowatt-hours of usable energy, almost double the energy of any other commercially available electric vehicle battery pack. The Tesla Roadster has a range of 236 miles on a single charge, as determined using the United

States Environmental Protection Agency s, or EPA s, combined two-cycle city/highway test. Further improvements in the energy efficiency of the Tesla Roadsters that we will begin producing in the next several months will increase the range

of these vehicles to 245 miles on a single charge, as determined using the EPA s combined two-cycle city/highway test. Recently, the EPA announced its intention to develop and establish new energy efficiency testing methodologies for electric

vehicles, which we believe could result in a significant decrease to the advertised ranges of all electric vehicles, including ours. The Tesla Roadster reportedly set a new world distance record of 313 miles on a single charge for a production

electric car in a rally across Australia as part of the 2009 Global Green Challenge. To date, our customers have driven their Tesla Roadsters an estimated aggregate of over 4.0 million miles.

Table of Contents

As of March 31, 2010 we had sold 1,063 Tesla Roadsters to customers in 22

countries. In July 2009, less than one year after the date of the commercial introduction of the Tesla Roadster, we introduced a new Roadster model, the Tesla Roadster 2, with improved electric powertrain performance and interior styling, and lower

production costs. At the same time we introduced the Roadster Sport, which accelerates from zero to 60 miles per hour in 3.7 seconds. We delivered our first right-hand drive model of the Tesla Roadster in January 2010, which we believe further

demonstrates our ability to rapidly launch new products. Using a 240 volt, 40 amp outlet that is widely available in many homes in the United States for electric appliances, charging the Tesla Roadster battery pack to full capacity will take

approximately 7 hours, which can be reduced to 4.5 hours with a professionally installed 70 amp circuit.

We intend to

continue to develop our electric powertrain technology and introduce additional vehicles, such as our planned Model S sedan. We are designing the Model S to be a four door, five passenger premium sedan that offers exceptional performance,

functionality and attractive styling with zero tailpipe emissions at a compelling cost of ownership. We are designing the Model S to include a third row with two rear-facing child seats, subject to applicable safety regulations and requirements,

allowing us to offer a seven passenger sedan. The drivable early prototype of the Model S was revealed to the public in March 2009 and despite a limited marketing effort, as of March 31, 2010, we had received approximately 2,200 customer

reservations with a minimum refundable payment of $5,000.

The Model S, which is planned to compete in the premium vehicle

market, is intended to have a significantly broader customer base than the Tesla Roadster. We currently intend to begin volume production of the Model S in 2012 with a target annual production of up to approximately 20,000 cars per year. We

currently anticipate introducing the base Model S at an effective price of $49,900 in the United States, assuming and after giving effect to the continuation of a currently available United States federal tax credit of $7,500 for the purchase of

alternative fuel vehicles. Even without this tax credit, we believe the Model S will be competitive from a pricing perspective with other premium vehicles.

In order to meet customer range expectations, we are designing the planned Model S to offer a variety of range options from 160 miles to

300 miles on a single charge, as projected using the EPA s combined two-cycle city/highway test. The EPA has announced its intention to develop and establish new energy efficiency testing methodologies for electric vehicles, which we believe

could result in a significant decrease to the advertised ranges of all electric vehicles, including ours. The Model S is being designed to be charged at home, but we are also planning to offer the capability to fast charge the vehicle in as little

as forty-five minutes at commercial charging stations that we anticipate may be available in the future. The Model S battery pack is also being designed with the capability of being rapidly swapped out at specialized commercial battery pack exchange

facilities that we anticipate may be available in the future.

We are designing the Model S to have an adaptable platform

architecture and common electric powertrain in order to allow us to efficiently create other electric vehicles, which may include, as examples, a crossover/sport utility vehicle, van or a cabriolet. By developing our future vehicles from this common

platform, we believe we can reduce their development time and, as a result, reduce the required additional capital investment. Our long-term goal is to offer consumers a full range of electric vehicles, including a product line at a lower price

point than the planned Model S.

We have developed a purpose-built electric powertrain to deliver the performance

objectives of the Tesla Roadster and our planned future vehicles. The battery pack has been designed to use high volume lithium-ion battery cells and allows for flexibility with respect to specific lithium-ion chemistry and battery cell

manufacturers. This enables us to leverage the significant investments being made globally by the battery industry to improve battery cell performance and lower cost. Harnessing the energy of a large number of lithium-ion battery cells into an

electric vehicle required us to develop sophisticated battery cooling, power, safety and management systems. Delivering the instant power and torque of electric technology also required us

Table of Contents

to develop a proprietary alternating current 3-phase induction motor and its associated power electronics. In addition, we developed extensive software systems to manage the overall efficiency,

safety and controls of the Tesla Roadster and our planned future vehicles. These technology innovations have resulted in an extensive intellectual property portfolio. By utilizing a combination of standard components and innovative technology, we

believe we have engineered what is currently the lowest cost battery pack when measured as a function of cost per kilowatt-hour.

Our electric powertrain is modular and compact, with fewer moving parts than an internal combustion engine. We believe this will enable

us to easily adapt our technology to a variety of vehicle applications. We have developed a relationship with Daimler AG, or Daimler, since March 2008 to apply our technology in a battery pack and charger for Daimler s Smart fortwo electric

drive. Blackstar Investco LLC, an affiliate of Daimler, holds more than 5% of our outstanding capital stock. We have been selected by Daimler to supply it with up to 1,000 battery packs and chargers to support a trial of the Smart fortwo electric

drive in at least five European cities. Daimler has notified us that it intends to increase its purchase commitment by 50% to 1,500 battery packs and chargers. We began shipping the first of these battery packs and chargers in November 2009 and

started to recognize revenue for these sales in the quarter ended December 31, 2009. In the first quarter of 2010, Daimler engaged us to assist with the development and production of a battery pack and charger for a pilot fleet of its A-Class

electric vehicles to be introduced in Europe during 2011 and we entered into a formal agreement for this arrangement in May 2010. In May 2010, Tesla and Toyota Motor Corporation, or Toyota, announced their intention to cooperate on the development

of electric vehicles, and for Tesla to receive Toyota s support with sourcing parts and production and engineering expertise for the Model S. We intend to expand our electric powertrain production facility in Palo Alto, California to develop

and market powertrain components to Daimler, Toyota and other automobile manufacturers.

In January 2010, we entered into a

$465.0 million long-term loan under the United States Department of Energy s Advanced Technology Vehicles Manufacturing Incentive Program which will be used to finance the development of our planned integrated manufacturing facility for the

Model S as well as our electric powertrain production facility. Through the date of this prospectus, we have received draw-downs under our loan facility with the DOE for an aggregate of $41.8 million. We also have been granted up to

approximately $31 million in tax incentives by the California Alternative Energy and Advanced Transportation Financing Authority. We believe these loans and incentives will help accelerate the time to volume production for both the planned Model S

and our electric powertrain business. In addition, we believe these loans and incentives provide us significant long-term financing that should enable us to focus more of our resources on the execution of our business plans.

We were incorporated in 2003 and began selling the Tesla Roadster in 2008. As of April 30, 2010, we had 604 employees worldwide.

Since inception through March 31, 2010, we have generated $147.6 million in revenue. As of March 31, 2010, we had an

accumulated deficit of $290.2 million and had experienced net losses of $78.2 million for the year ended December 31, 2007, $82.8 million for the year ended December 31, 2008, $55.7 million for the year ended December 31, 2009, and $29.5 million for

the three months ended March 31, 2010.

Recent Developments

In May 2010, we entered into a stock purchase agreement with Toyota pursuant to which Toyota will purchase $50.0 million of our common

stock in a private placement to close immediately subsequent to the closing of this offering. In addition, Tesla and Toyota announced their intention to cooperate on the development of electric vehicles, and for Tesla to receive Toyota s

support with sourcing parts and production and engineering expertise for the Model S. We also entered into an agreement to purchase an existing automobile production facility in Fremont, California from New United Motor Manufacturing, Inc., or

NUMMI, which is a joint venture between Toyota and Motors Liquidation Company, the owner of selected assets of General Motors. The purchase

Table of Contents

totals 207 acres, or approximately 55% of the land at the site, and includes all of the manufacturing facilities located thereon. The purchase price for the land and the facility, excluding

whatever manufacturing equipment we may subsequently acquire from NUMMI, is approximately $42 million. We anticipate that this purchase will close within a few months following the completion of this offering. We intend to use this facility for the

production of our planned Model S and future vehicles. We are in an early stage of planning for this facility.

Industry Overview

We believe incumbent automobile manufacturers are at a crossroads and face significant industry-wide challenges. The reliance

on the gasoline-powered internal combustion engine as the principal automobile powertrain technology has raised environmental concerns, created dependence among industrialized and developing nations on oil largely imported from foreign nations and

exposed consumers to volatile fuel prices. In addition, we believe the legacy investments made by incumbent automobile manufacturers in manufacturing and technology related to the internal combustion engine have to date inhibited rapid innovation in

alternative fuel powertrain technologies.

We believe that shifting consumer preferences together with increasing government

regulation and incentives will result in significant growth in the market for electric vehicles. We believe many consumers are increasingly willing to consider buying electric-based vehicles due to the environmental, economic and national security

consequences of using gasoline-powered vehicles, as demonstrated by the increased sales of hybrid electric vehicles in recent years. We also believe government regulations and incentives are accelerating the growth of the electric vehicle market.

Many governments in countries throughout the world are regulating vehicle emissions and fuel economy standards and offering incentives to consumers to purchase more energy efficient vehicles. According to Frost & Sullivan, a business research

and consulting firm, the market for electric-based vehicles, which includes electric vehicles, hybrid electric vehicles, and plug-in hybrid electric vehicles, is expected to grow to approximately 10.6 million units worldwide, or approximately

14% of new vehicles sold by 2015 from approximately 1.75 million units or 3% of new vehicles sold in 2008.

We believe

incumbent automobile manufacturers have faced significant challenges that to date have inhibited their ability to capitalize fully on the electric vehicle opportunity, including:

Dependence on the Internal Combustion Engine. While GM and Toyota have each invested over $1 billion in hybrid and plug-in electric vehicle

programs, we believe many incumbent automobile manufacturers continue to emphasize investment in internal combustion engine technologies over investment in fully electric technologies because of their need to support their existing revenue base and

core competencies.

Limited Electric Powertrain Expertise. To date, many incumbent automobile manufacturers have pursued multiple alternative fuel programs and, in

doing so, have outsourced key components of alternative fuel powertrain development. By exploring a diverse range of alternative fuel programs while simultaneously continuing to invest in the internal combustion engine, we believe incumbent

automobile manufacturers have diluted their focus on a specific alternative fuel powertrain technology such as electric powertrains.

Profitability Pressures and Reduced Operating Flexibility. Many incumbent automobile manufacturers have recently faced deteriorating margins and

liquidity, which we believe has significantly reduced their operating flexibility and to date has constrained their liquid capital resources.

Expensive New Product Development Process. While certain incumbent automobile manufacturers have already introduced or anticipate introducing

plug-in hybrid or fully electric vehicles, new product launches by incumbent automobile manufacturers from development to production have historically required significant capital investments.

Table of Contents

Despite the automobile industry s challenges, incumbent automobile manufacturers

have attempted over time to respond to shifting consumer desires and government mandates by incorporating elements of electric propulsion into their vehicles by introducing hybrid powertrains. Although hybrid electric vehicles address some of the

concerns associated with the historical reliance on the internal combustion engine, we believe they are a transitional technology between internal combustion engine vehicles and fully electric vehicles. The increased complexity and weight of the

dual powertrain system inherent in hybrid and plug-in hybrid electric vehicles forces engineering compromises which result in a less energy efficient vehicle and generally limits performance. Consequently, these hybrid vehicles do not realize the

full benefits of electric propulsion, and still consume gasoline and produce emissions. While incumbent automobile manufacturers may recognize the benefits of electric propulsion, we believe that due to technology limitations and their relatively

limited expertise in battery, software and electric powertrain technologies, incumbent automobile manufacturers have to date been unable to design and offer a commercially successful electric vehicle that offers compelling range, vehicle design and

performance at an affordable cost.

Our Solution

We design, develop, manufacture and sell high-performance fully electric vehicles and advanced electric vehicle powertrain components

through our highly differentiated business model. We intend to leverage our proprietary electric powertrain system developed for the Tesla Roadster to form the basis for our planned Model S sedan. We believe our combination of engineering and

management expertise from Silicon Valley and the automotive industry, together with our operational structure, will help us to rapidly innovate and to cost efficiently introduce new vehicles and technologies. By owning our sales and service network,

we believe we can offer a compelling customer experience while achieving operating efficiencies and capturing sales and service revenues that incumbent automobile manufacturers do not receive in the traditional franchised dealer model. We also plan

to leverage our electric powertrain technology to develop and sell powertrain components to other manufacturers, such as the battery packs and chargers we have recently begun to sell to Daimler.

We believe our proprietary electric powertrain system will enable us to design and develop zero emission vehicles that overcome the

design, styling, and performance issues that have historically limited broad consumer adoption of electric vehicles. As a result, we believe customers of our vehicles will enjoy many benefits, including:

Long Range and Recharging Flexibility. The Tesla Roadster has been designed to provide range capabilities significantly in excess of any current

and prior generation electric vehicles. We are designing our planned Model S to offer a variety of intermediate range options as well as a range option extending beyond that of the Tesla Roadster. In addition, the Tesla Roadster incorporates our

proprietary on-board charging system, permitting recharging from almost any available electrical outlet, and we are designing the Model S to offer fast charging capability from higher power electrical outlets.

Energy Efficiency and Cost of Ownership. We believe our Tesla Roadster offers and our planned Model S will offer consumers an attractive cost of

ownership when compared to similar internal combustion engine or hybrid electric vehicles. By using a single powertrain and customizing the systems within the electric powertrain and the rest of the vehicle, our vehicles are more energy efficient,

and therefore less expensive to operate, than currently available hybrid or internal combustion engine vehicles.

High-Performance Without Compromised Design or Functionality. With the Tesla Roadster, we believe we have been able to successfully overcome the

design and performance tradeoff issues that encumbered earlier electric vehicle designs. We believe the Tesla Roadster offers our customers an unparalleled driving experience with instantaneous and sustained acceleration through an extended range of

speed. We intend to apply such advancements to our future vehicles.

Table of Contents

Our Competitive Strengths

We believe the following strengths position us well to capitalize on the expected growth in the electric vehicle market:

Singular Focus and Leadership in Electric Powertrain Technology. We are focused exclusively on developing our electric vehicles and electric

powertrain technology to achieve a compelling combination of range and performance in our vehicles. We intend to use our electric powertrain expertise to innovate rapidly and sustain technological and time to market advantages over incumbent

automobile manufacturers. In March 2010, we were named one of the top 50 most innovative companies in the world by Technology Review, a publication owned by the Massachusetts Institute of Technology.

Combination of Expertise from Silicon Valley and the Traditional Automotive Industry. Our roots in Silicon Valley have enabled us to recruit

engineers with strong skills in electrical engineering, software and controls, which we have complemented with significant automotive expertise in vehicle engineering and manufacturing from other members of our team.

Proprietary Systems Integration of Vehicle and Electric Powertrain. We believe that our ability to combine our electric powertrain expertise

with our vehicle engineering expertise provides a broad capability in electric vehicle design and systems integration.

Rapid Customer Focused Product Development. We have designed our product development process to rapidly react to data collected from our

vehicles and the direct interaction with our customers at our company-owned Tesla stores, which we believe will enable us to rapidly introduce new vehicles and features.

Ownership of Sales and Service Network. We intend for our distribution and service network to offer a compelling customer experience while

achieving operating efficiencies and capturing sales and service revenues incumbent automobile manufacturers do not generally receive in the traditional franchised distribution and service network model.

Brand Leadership. We believe the Tesla brand is well recognized in our target market and is associated with high performance, long range

electric vehicles, despite limited marketing spending to date. In November 2009, Advertising Age selected Tesla as one of America s hottest brands in a special report highlighting the year s 50 top brands.

Substantial Funding in Place to Accelerate Growth. We believe our $465.0 million loan facility agreement under the United States Department of

Energy s Advanced Technology Vehicles Manufacturing Incentive Program provides significant long-term financing that will enable us to focus on executing our business plans.

Capital Efficiency. We believe our rapid product development process, our modular and adaptable powertrain, our plan to design and manufacture

multiple product types on a singular platform and our ability to hold lower inventory levels while still meeting customer demand will help reduce the capital required to reach operating efficiencies. This approach is designed with the aim of

allowing us to achieve profitability at relatively low volumes and create a viable long-term business. For example, the cumulative capital expenditures and research and development costs for the Tesla Roadster from our inception to the date we

delivered our first Tesla Roadster equaled approximately $125 million.

Our Strategy

We intend to be a leading global manufacturer and direct seller of electric vehicles and electric vehicle technologies. Key elements of

our strategy include:

Successfully Launch the Model S. We believe the successful launch of the planned Model S is critical to our ability to capitalize on the

electric vehicle market opportunity. We are currently executing a

Table of Contents

plan to finish the design, engineering and component sourcing for the Model S and to build out our planned manufacturing facility in Fremont, California and obtain the equipment to support its

production with the goal of commercial introduction of the Model S in 2012.

Use a Common Platform to Introduce New Models. We intend to design the Model S with an adaptable platform architecture and common electric

powertrain, to provide us the flexibility to use the Model S platform to cost efficiently launch new electric vehicle models subsequent to the start of production of the Model S.

Develop Integrated Engineering and Manufacturing Capabilities. We intend to develop our planned substantially integrated electric vehicle

manufacturing facility in Fremont, California, allowing our vehicle engineering and manufacturing teams to work alongside one another to streamline the feedback loop for rapid product enhancements and quality improvements.

Continue to Focus on Technological Advancement and Cost Improvement. We intend to continue to further develop our proprietary electric

powertrain system, specifically its range capabilities, while continuing to reduce its manufacturing cost.

Expand our Company-Owned Sales and Service Network. As of May 25, 2010, we had opened 11 Tesla stores in the United States and Europe, and we

plan to nearly double the number of Tesla stores opened by the end of 2010, with a goal of establishing approximately 50 Tesla stores globally within the next several years in connection with the planned Model S rollout.

Leverage Industry Advancements in Battery Cells. We intend to leverage the substantial investments being made globally by battery cell

manufacturers, as we have designed our powertrain technology to permit flexibility with respect to battery cell chemistry, form factor and vendor.

Build and Leverage Strategic Relationships. We intend to establish and develop strategic relationships with industry leaders to launch our

planned electric vehicles and sell our electric vehicle powertrain components.

Risks Affecting Us

Our business is subject to a number of risks and uncertainties that you should understand before making an investment decision. These

risks are discussed more fully in the section entitled Risk Factors following this prospectus summary. These include:

our limited operating history makes evaluating our business and future prospects difficult, and may increase the risk of your investment;

we have a history of losses and we expect significant increases in our costs and expenses to result in continuing losses for at least the foreseeable

future;

our future growth is dependent upon consumers willingness to adopt electric vehicles;

we are dependent upon our ability to fully draw down on our loan facility from the United States Department of Energy, which may restrict our ability

to conduct our business;

our distribution model is different from the predominant current distribution model for automobile manufacturers, which makes evaluating our business,

operating results and future prospects difficult;

we are significantly dependent upon revenue generated from the sale of our electric vehicles, specifically the Tesla Roadster, in the near term, and

our future success will be dependent upon our ability to design and achieve market acceptance of new vehicle models, and, in particular, the Model S;

we anticipate that we will experience an increase in losses and may experience a decrease in automotive sales revenues prior to the launch of the Model

S;

Table of Contents

our production model for the non-powertrain portion of the Model S is unproven, still evolving and is very different from the non-powertrain portion of

the production model for the Tesla Roadster; and

we may experience significant delays in the design, manufacture, launch and financing of the Model S, including in the build out of our planned

Model S manufacturing facility.

Corporate Information

We are headquartered in Palo Alto, California. Our principal executive offices are located at 3500 Deer Creek Road, Palo Alto, California

94304, and our telephone number at this location is (650) 681-5000. Our website address is www.teslamotors.com. Information contained on our website is not incorporated by reference into this prospectus and you should not consider information

on our website to be part of this prospectus. We were incorporated in 2003.

The Tesla Motors design logo,

Tesla Motors, Tesla Roadster, Model S and other trademarks or service marks of Tesla Motors appearing in this prospectus are the property of Tesla Motors. When used herein, the term Tesla store means

Tesla retail locations as well as Tesla galleries where we show potential customers our vehicles but do not consummate sales. This prospectus contains additional trade names, trademarks and service marks of other companies. We do not intend our use

or display of other companies tradenames, trademarks or service marks to imply a relationship with, or endorsement or sponsorship of us by, these other companies.

Table of Contents

THE OFFERING

Common stock we are offering

shares

Common stock offered by the selling stockholders

shares

Common stock sold by us in the concurrent private placement

Immediately subsequent to the closing of this offering, Toyota Motor Corporation, or Toyota, will purchase from us in a private placement, the number of shares of our common stock equal to

$50.0 million, at a price per share equal to the initial public offering price. Based on an assumed initial public offering price of $ per share, which is the midpoint of

the range set forth on the cover of this prospectus, this would be shares. We will receive the full proceeds and will not pay any underwriting discounts or commissions with

respect to the shares that are sold in the private placement. The sale of these shares to Toyota will not be registered in this offering and will be subject to a lock-up of 180 days. We refer to the private placement of these shares of

common stock as the concurrent private placement.

Common stock to be outstanding after this offering and the concurrent private placement

shares

Use of proceeds

We may use a portion of the net proceeds from this offering and the concurrent private placement to fund planned capital expenditures, working capital and other general corporate purposes. Under

our loan facility with the United States Department of Energy, which we refer to herein as our DOE Loan Facility, we have agreed to spend up to $33 million plus any cost overruns we may encounter in developing our Model S and our planned

Model S manufacturing facility as well as any cost overruns we encounter in developing our powertrain facility. In addition to this obligation, we have agreed to set aside 50% of the net proceeds from this offering and the concurrent private

placement to fund a separate, dedicated account under our DOE Loan Facility to fund project costs for our anticipated powertrain and Model S manufacturing facilities that would otherwise have been funded through advances made under the DOE Loan

Facility. This will not affect our ability to draw down the full amount of the DOE loans, but will require us to use the dedicated account to fund certain project costs up front, which costs may then be reimbursed by loans under the DOE Loan

Facility once the dedicated account is depleted, or as part of the final advance for the applicable project. We currently anticipate making aggregate capital expenditures of between $100 million and $125 million during the year ended

December 31, 2010. These capital expenditures will include approximately $42 million to purchase our planned manufacturing facility for the Model S in Fremont, California, excluding any manufacturing equipment we may subsequently acquire.

Our aggregate capital expenditures will also include funding the expansion of our Tesla stores. See Use of Proceeds.

Directed share program

The underwriters have reserved for sale, at the initial public offering price, up to shares of our common stock being

offered for sale

Table of Contents

to business associates, employees and friends and family members of our employees and Tesla customers who have received delivery of a Tesla Roadster from Tesla. We will offer these shares to the

extent permitted under applicable regulations in the United States and in the various countries where we have delivered Tesla Roadsters. The number of shares available for sale to the general public in this offering will be reduced to the extent

these persons purchase reserved shares. Any reserved shares not purchased will be offered by the underwriters to the general public on the same terms as the other shares.

Proposed Nasdaq Global Market symbol

TSLA

The number of shares of common stock

that will be outstanding after this offering and the concurrent private placement is based on shares outstanding as of March 31, 2010 and excludes:

11,564,717 shares of common stock issuable upon the exercise of options outstanding at March 31, 2010 a weighted average exercise price of $5.71

per share;

256,320 shares of common stock issuable upon the exercise of options granted after March 31, 2010 at a weighted average exercise price of $13.23

per share;

3,085,011 shares of common stock issuable upon the exercise of a warrant granted to the DOE in connection with the closing of our DOE Loan Facility on

January 20, 2010, at an exercise price of $7.54 per share and 5,100 shares of common stock issuable upon the exercise of a warrant granted to the DOE on May 21, 2010, at an exercise price of $8.94 per share (if we prepay our DOE Loan Facility in

full or in part, the total amount of shares exercisable under these warrants will be proportionately reduced); and

13,759,093 shares of common stock reserved for future issuance under our stock-based compensation plans, consisting of 10,666,666 shares of common

stock reserved for issuance under our 2010 Equity Incentive Plan, 1,425,761 shares of common stock reserved for future grant or issuance under our 2003 Equity Incentive Plan as of March 31, 2010, which shares will be added to the shares to be

reserved under our 2010 Equity Incentive Plan upon the effectiveness of the 2010 Equity Incentive Plan, and 1,666,666 shares of common stock reserved for issuance under our 2010 Employee Stock Purchase Plan and shares that become available under the

2010 Equity Incentive Plan and 2010 Employee Stock Purchase Plan, pursuant to provisions thereof that automatically increase the share reserves under the plans each year, as more fully described in Management Employee Benefit Plans.

The 2010 Equity Incentive Plan and the 2010 Employee Stock Purchase Plan will become effective on the date of this offering.

Unless otherwise indicated, all information in this prospectus assumes:

the automatic conversion of all outstanding shares of our convertible preferred stock into an aggregate of 70,226,844 shares of common stock effective

immediately prior to the closing of this offering;

the 1-for-3 reverse stock split of our outstanding common stock effected in May 2010;

the issuance of shares of common stock upon the net exercise of outstanding

warrants that would otherwise expire upon the completion of this offering at an assumed initial public offering price of $ per share;

the issuance of shares of common stock to Toyota upon the closing of the

concurrent private placement based on an assumed initial public offering price of $ per share;

the filing of our amended and restated certificate of incorporation upon the completion of this offering; and

no exercise by the underwriters of their right to purchase up to an additional

shares of common stock from the selling stockholders.

10

Table of Contents

SUMMARY CONSOLIDATED FINANCIAL DATA

The following summary consolidated financial data for the years ended December 31, 2007, 2008 and 2009 are derived from our audited

consolidated financial statements that are included elsewhere in this prospectus. The summary unaudited consolidated financial data for the three months ended March 31, 2009 and 2010 and as of March 31, 2010 are derived from unaudited consolidated

financial statements for such periods and dates, which are included elsewhere in this prospectus. The unaudited consolidated financial statements were prepared on a basis consistent with our audited consolidated financial statements and include, in

the opinion of management, all adjustments necessary for the fair presentation of the financial information contained in those statements. The historical results presented below are not necessarily indicative of financial results to be achieved in

future periods.

The following summary consolidated financial data table reflects the 1-for-3 reverse stock split of our

outstanding common stock effected in May 2010.

Prospective investors should read these summary consolidated financial

data together with Management s Discussion and Analysis of Financial Condition and Results of Operations and our consolidated financial statements and the related notes included elsewhere in this prospectus.

Years Ended December 31,

Three Months Ended

March

31,

2007

2008

2009

2009

2010

(in thousands, except share and per share data)

Consolidated Statements of Operations Data:

Revenues:

Automotive sales (including zero emission vehicle credit sales of $3,458, $8,152, $1,275 and $506, for the years ended

December 31, 2008 and 2009, and the three months ended March 31, 2009 and 2010, respectively)

73

14,742

111,943

20,886

20,585

Development services

227

Total revenues

73

14,742

111,943

20,886

20,812

Cost of revenues(1):

Automotive sales

15,883

102,408

22,932

16,858

Development services

102

Total cost of revenues

15,883

102,408

22,932

16,960

Gross profit (loss)

64

(1,141

9,535

(2,046

3,852

Operating expenses(1):

Research and development (net of development compensation of $23,249 for the year ended December 31, 2009)

62,753

53,714

19,282

7,941

13,265

Selling, general and administrative

17,244

23,649

42,150

6,607

16,585

Total operating expenses

79,997

77,363

61,432

14,548

29,850

Loss from operations

(79,933

(78,504

(51,897

(16,594

(25,998

Interest income

1,749

529

159

16

48

Interest expense

(3,747

(2,531

(1,402

(230

Other income (expense), net(2)

137

(963

(1,445

1,972

(3,221

Loss before income taxes

(78,047

(82,685

(55,714

(16,008

(29,401

Provision for income taxes

110

97

26

118

Net loss

(78,157

(82,782

(55,740

(16,016

(29,519

Net loss per share of common stock, basic and diluted(3)

(22.69

(12.46

(7.94

(2.31

(4.04

Shares used in computing net loss per share of common stock, basic and diluted(3)

3,443,806

6,646,387

7,021,963

6,924,194

7,301,940

Pro forma net loss per share of common stock, basic and diluted(2)(4) (unaudited)

Shares used in computing the pro forma net loss per share of common stock, basic and diluted(2)(4) (unaudited)

11

Table of Contents

(1)

Includes stock-based compensation expense as follows:

Years Ended December 31,

Three Months Ended

March

31,

2007

2008

2009

2009

2010

(in thousands)

Cost of revenues

26

61

12

42

Research and development

95

125

376

40

281

Selling, general and administrative

103

286

997

38

3,064

Total

198

437

1,434

90

3,387

(2)

In January 2010, we issued a warrant to the DOE in connection with the closing of the DOE Loan Facility to purchase shares of our Series E convertible preferred

stock. This convertible preferred stock warrant will become a warrant to purchase shares of our common stock upon the closing of this offering. Beginning on December 15, 2018 and until December 14, 2022, the shares subject to purchase

under the warrant will become exercisable in quarterly amounts depending on the average outstanding balance of the DOE Loan Facility during the prior quarter. Since the number of shares of common stock ultimately issuable under the warrant will

vary, this warrant will be carried at its estimated fair value with changes in the fair value of this common stock warrant liability reflected in other income (expense), net, until its expiration or vesting. Potential shares of common stock issuable

upon exercise of the DOE warrant will be excluded from the calculation of diluted net loss per share of common stock until at least such time as we generate a net profit in a given period.

(3)

Our basic net loss per share of common stock is calculated by dividing the net loss by the weighted-average number of shares of common stock outstanding for the period.

The diluted net loss per share of common stock is computed by dividing the net loss by the weighted-average number of shares of common stock, excluding common stock subject to repurchase, and, if dilutive, potential shares of common stock

outstanding during the period. Potential shares of common stock consist of stock options to purchase shares of our common stock and warrants to purchase shares of our convertible preferred stock (using the treasury stock method) and the conversion

of our convertible preferred stock and convertible notes payable (using the if-converted method). For purposes of all these calculations, potential shares of common stock have been excluded from the calculation of diluted net loss per share of

common stock as their effect is antidilutive since we generated a net loss in each period.

(4)

Pro forma basic and diluted net loss per share of common stock has been computed to give effect to the conversion of the convertible preferred stock into common stock

and the 1-for-3 reverse stock split of our outstanding common stock effected in May 2010. Also, the numerator in the pro forma basic and diluted net loss per share calculation has been adjusted to remove gains and losses resulting from

remeasurements of the convertible preferred stock warrant liability as it is assumed that these warrants will be exercised immediately prior to a qualifying initial public offering and will no longer require periodic revaluation.

Our consolidated balance sheet data as of March 31, 2010 is presented:

on an actual basis;

on a pro forma basis to give effect to (i) the conversion of all outstanding shares of our convertible preferred stock into 70,226,844 shares of

our common stock, (ii) the issuance of shares of our common stock upon the assumed net exercise of outstanding warrants that would otherwise expire upon the completion of

this offering at an assumed initial public offering price of $ per share, which is the midpoint of the range set forth on the cover page of this prospectus, and the conversion

of our DOE preferred stock warrant liability into common stock warrant liability, (iii) the additional funds borrowed under our DOE Loan Facility from April 1, 2010 through the date of this prospectus of $11.9 million, (iv) the issuance of

100,000 shares of our common stock upon the net exercise of common stock warrants that will automatically occur upon the completion of this offering and (v) the issuance of a warrant to the DOE on May 21, 2010 for the purchase of 5,100 shares of

common stock at an exercise price of $8.94 per share; and

on a pro forma as adjusted basis to give effect to the pro forma adjustments as well as (i) the sale of

shares of common stock by us in this offering at an assumed initial public offering price of $ per

share, which is the midpoint of the range set forth on the cover page of this prospectus, and after deducting estimated underwriting discounts and commissions and estimated offering

12

Table of Contents

expenses payable by us and (ii) the sale of shares of common stock to be purchased directly from us by Toyota in the

concurrent private placement based on an assumed initial public offering price of $ per share.

As of March 31, 2010

Actual

Pro

Forma

Pro Forma As

Adjusted(1)

(Unaudited)

(in thousands)

Consolidated Balance Sheet Data:

Cash and cash equivalents

61,546

73,444

Restricted cash(2)

7,487

7,487

Property and equipment, net

26,866

26,866

Working capital

41,497

53,395

Total assets

145,320

157,218

Convertible preferred stock warrant liability

10,359

Common stock warrant liability

6,116

Capital lease obligations, less current portion

719

719

Long-term debt(3)

29,920

41,818

Convertible preferred stock

319,225

Total stockholders equity (deficit)

(279,297

44,179

(1)

Each $1.00 increase or decrease in the assumed initial public offering price of $ per share, the

midpoint of the range reflected on the cover page of this prospectus, would increase or decrease, as applicable, our cash and cash equivalents, working capital, total assets and total stockholders equity (deficit) by approximately

$ million, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and after deducting the estimated underwriting

discounts and commissions and estimated offering expenses payable by us.

(2)

The restricted cash represents a deposit held in escrow for the purchase of manufacturing equipment, security deposits related to lease agreements, equipment financing,

as well as security held by a vendor as part of the vendor s standard credit policies. On a pro forma as adjusted basis, the restricted cash also represents the portion of the proceeds from this offering and the concurrent private placement

that we are required to hold in a separate dedicated account pursuant to our DOE Loan Facility to fund certain costs of our powertrain and Model S manufacturing facility projects.

(3)

On January 20, 2010, we entered into a loan agreement with the United States Federal Financing Bank, or the FFB, and the DOE, pursuant to the Advanced Technology

Vehicles Manufacturing Incentive Program, or the ATVM Program. Under such facility, the FFB has made available to us two multi-draw term loan facilities in an aggregate principal amount of up to $465.0 million. Up to an aggregate principal

amount of $101.2 million will be made available under the first term loan facility to finance up to 80% of the costs eligible for funding under the ATVM Program for the build out of a facility to design and manufacture lithium-ion battery packs,

electric motors and electric components. Up to an aggregate principal amount of $363.9 million will be made available under the second term loan facility to finance up to 80% of the costs eligible for funding under the ATVM Program for the

development of, and to build out the manufacturing facility for the Model S sedan. See the section titled Business Governmental Programs, Incentives and Regulations United States Department of Energy Loans below for additional

information.

13

Table of Contents

RISK FACTORS

Investing in our common stock involves a high degree of risk. You should carefully consider the following risks and all other

information contained in this prospectus, including our consolidated financial statements and the related notes, before investing in our common stock. If any of the following risks materialize, our business, prospects, financial condition and

operating results could be materially harmed. In such case, the price of our common stock could decline, and you may lose some or all of your investment.

Risks Related to Our Business and Industry

Our limited operating history makes evaluating our business and future prospects difficult, and may increase the risk of your

investment.

You must consider the risks and difficulties we face as an early stage company with limited operating

history. If we do not successfully address these risks, our business, prospects, operating results and financial condition will be materially and adversely harmed. We were formed in July 2003. We began delivering our first performance electric

vehicle, the Tesla Roadster, in early 2008, and as of March 31, 2010 we had only sold 1,063 production vehicles to customers, almost all of which were sold in the United States and Europe. Our revenues were $14.7 million for the year ended

December 31, 2008, $111.9 million for the year ended December 31, 2009 and $20.8 million for the three months ended March 31, 2010. We have a very limited operating history on which investors can base an evaluation of our business,

operating results and prospects. To date we have derived our revenues principally from sales of the Tesla Roadster and related sales of zero emission vehicle credits, and to a lesser extent on products and services related to electric powertrain

sales. We intend in the longer term to derive substantial revenues from the sales of our planned Model S sedan electric vehicle which is at an early stage of development and which we do not expect to be in production until 2012. We have no operating

history with respect to the Model S electric vehicle and have only recently begun the component procurement process for the Model S, which limits our ability to accurately forecast the cost of the vehicle. In addition, we recently announced

that we have entered into an agreement to purchase a manufacturing facility in Fremont, California to produce such vehicles, but we have not yet finalized the design or completed our engineering, manufacturing or component supply plans for the Model

S. In addition, to date our powertrain sales, development services revenue and powertrain research and development compensation have been exclusively generated under arrangements with Daimler AG, or Daimler, for the development and sale of a battery

pack and a charger for Daimler s Smart fortwo electric drive. Blackstar Investco LLC, or Blackstar, an affiliate of Daimler, holds more than 5% of our outstanding capital stock. Other than our arrangements with Daimler and its affiliates, we

have not entered into any development or sales agreement for our electric powertrain business. There are no assurances that we will be able to secure future business with Daimler or its affiliates. In May 2010, Tesla and Toyota Motor Corporation, or

Toyota, announced their intention to cooperate on the development of electric vehicles, and for Tesla to receive Toyota s support with sourcing parts and production and engineering expertise for the Model S. However, we have not entered into

any agreements with Toyota for any such arrangements, including any purchase orders, and we may never do so.

It is difficult

to predict our future revenues and appropriately budget for our expenses, and we have limited insight into trends that may emerge and affect our business. For example, in the four most recent fiscal quarters ended March 31, 2010, we have recorded

quarterly revenue of as much as $45.5 million and as little as $18.6 million and quarterly operating losses of as much as $26.0 million and as little as $4.3 million. In the event that actual results differ from our estimates or we adjust our

estimates in future periods, our operating results and financial position could be materially affected.

In addition, our

revenues to date have included amounts we receive from selling zero emission vehicle, or ZEV, credits to other automobile manufacturers, pursuant to certain state regulations. We have entered into an agreement with American Honda Co., Inc., or

Honda, in 2009 for the sale of ZEV credits that we earn from the sale of vehicles that we manufacture through December 31, 2011. As of March 31, 2010, we had sold credits for 368 vehicles under this agreement and Honda has an obligation to

purchase additional credits earned from the

14

Table of Contents

sale of any remaining vehicles that we manufactured in 2009 but sold in 2010 and from the sale of up to 287 additional vehicles manufactured in 2010 and 2011 prior to the expiration of the

agreement. For the years ended December 31, 2008 and 2009, and the three months ended March 31, 2010, we recognized revenue from the sale of ZEV credits of $3.5 million, $8.2 million and $0.5 million, respectively. We may not be able to

enter into new agreements to sell any additional credits we may earn in excess of the current contractual amounts on equivalent terms and if this occurs, our financial results will be harmed.

We have a history of losses and we expect significant increases in our costs and expenses to result in continuing losses for at

least the foreseeable future.

We incurred a net loss of $29.5 million for the three months ended March 31,

2010 and have incurred net losses of approximately $290.2 million from our inception through March 31, 2010. We have had net losses in each quarter since our inception. We believe that we will continue to incur operating and net losses each

quarter until at least the time we begin significant deliveries of the Model S, which is not expected to occur until 2012, or possibly later. Even if we are able to successfully develop the Model S, there can be no assurance that it will be

commercially successful. If we are to ever achieve profitability it will be dependent upon the successful development and successful commercial introduction and acceptance of automobiles such as the Model S, which may not occur.

We expect the rate at which we will incur losses to increase significantly in future periods from current levels as we:

design, develop and manufacture our planned Model S;

design, develop and manufacture components of our electric powertrain;

develop and equip our planned manufacturing facility to produce our Model S in Fremont, California;

build up inventories of parts and components for our Model S;

develop and equip manufacturing facilities to produce our electric powertrain components;

open new Tesla stores;

expand our design, development, maintenance and repair capabilities;

increase our sales and marketing activities; and

increase our general and administrative functions to support our growing operations.

Because we will incur the costs and expenses from these efforts before we receive any incremental revenues with respect thereto, our

losses in future periods will be significantly greater than the losses we would incur if we developed our business more slowly. In addition, we may find that these efforts are more expensive than we currently anticipate or that these efforts may not

result in increases in our revenues, which would further increase our losses.

In addition, as of March 31, 2010, we

had recorded a full valuation allowance on our United States net deferred tax assets as at this point we believe it is more likely than not that we will not achieve profitability and accordingly be able to use our deferred tax assets in the

foreseeable future. In addition, we have not yet determined whether this offering would constitute an ownership change resulting in limitations on our ability to use our net operating loss and tax credit carry-forwards. If an ownership change is

deemed to have occurred as a result of this offering, utilization of these assets could be significantly reduced.

Our future growth is dependent upon consumers willingness to adopt electric vehicles.

Our growth is highly dependent upon the adoption by consumers of, and we are subject to an elevated risk of any reduced demand for,

alternative fuel vehicles, generally, and electric vehicles in particular. If the market

15

Table of Contents

for electric vehicles does not develop as we expect or develops more slowly than we expect, our business, prospects, financial condition and operating results will be harmed. The market for

alternative fuel vehicles is relatively new, rapidly evolving, characterized by rapidly changing technologies, price competition, additional competitors, evolving government regulation and industry standards, frequent new vehicle announcements and

changing consumer demands and behaviors. Factors that may influence the adoption of alternative fuel vehicles, and specifically electric vehicles, include:

perceptions about electric vehicle quality, safety (in particular with respect to lithium-ion battery packs), design, performance and cost, especially

if adverse events or accidents occur that are linked to the quality or safety of electric vehicles;

perceptions about vehicle safety in general, in particular safety issues that may be attributed to the use of advanced technology, including vehicle

electronics and regenerative braking systems, such as the possible perception that Toyota s recent vehicle recalls may be attributable to these systems;

the limited range over which electric vehicles may be driven on a single battery charge;

the decline of an electric vehicle s range resulting from deterioration over time in the battery s ability to hold a charge;

concerns about electric grid capacity and reliability, which could derail our past and present efforts to promote electric vehicles as a practical

solution to vehicles which require gasoline;

the availability of alternative fuel vehicles, including plug-in hybrid electric vehicles;

improvements in the fuel economy of the internal combustion engine;

the availability of service for electric vehicles;

consumers desire and ability to purchase a luxury automobile or one that is perceived as exclusive;

the environmental consciousness of consumers;

volatility in the cost of oil and gasoline;

consumers perceptions of the dependency of the United States on oil from unstable or hostile countries, and government regulations and economic

incentives promoting fuel efficiency and alternate forms of energy;

access to charging stations, standardization of electric vehicle charging systems and consumers perceptions about convenience and cost to charge

an electric vehicle;

the availability of tax and other governmental incentives to purchase and operate electric vehicles or future regulation requiring increased use of

nonpolluting vehicles;

perceptions about and the actual cost of alternative fuel; and

macroeconomic factors.

In addition, recent reports have suggested the potential for extreme temperatures to affect the range or performance of electric

vehicles. Based on internal testing, we estimate that our Tesla Roadster would have a 5-10% reduction in range when operated in -20°C temperatures. To the extent customers have concerns about such reductions or third party reports which suggest

reductions in range greater than our estimates gain widespread acceptance, our ability to market and sell our vehicles, particularly in colder climates, may be adversely impacted.

Additionally, we may become subject to regulations that may require us to alter the design of our vehicles, which could negatively impact

consumer interest in our vehicles. For example, our electric vehicles make less noise than internal combustion vehicles. We are aware of advocacy groups, such as U.S. National Federation of the Blind, which are lobbying for regulations to require

electric vehicle manufacturers to adopt minimum sound standards.

16

Table of Contents

The influence of any of the factors described above may cause current or potential customers

not to purchase our electric vehicles, which would seriously harm our business, operating results, financial condition and prospects.

The range of our electric vehicles on a single charge declines over time which may negatively influence potential customers

decisions whether to purchase our vehicles.

The range of our electric vehicles on a single charge declines principally

as a function of usage, time and charging patterns. For example, a customer s use of their Tesla vehicle as well as the frequency with which they charge the battery of their Tesla vehicle can result in additional deterioration of the

battery s ability to hold a charge. We currently expect that our battery pack will retain approximately 60-65% of its ability to hold its initial charge after approximately 100,000 miles and 7 years, which will result in a decrease to the

vehicle s initial range. Such battery deterioration and the related decrease in range may negatively influence potential customer decisions whether to purchase our vehicles, which may harm our ability to market and sell our vehicles.

The operation of our vehicles is different from internal combustion engine vehicles and our customers may experience

difficulty operating them properly, including difficulty transitioning between different methods of braking.

We have

designed our vehicles to minimize inconvenience and inadvertent driver damage to the powertrain. In certain instances, these protections may cause the vehicle to behave in ways that are unfamiliar to drivers of internal combustion vehicles. For

example, we employ regenerative braking to recharge the battery in most modes of vehicle operation. Our customers may become accustomed to using this regenerative braking instead of the wheel brakes to slow the vehicle. However, when the vehicle is

at maximum charge, the regenerative braking is not needed and is not employed. Accordingly, our customers may have difficulty shifting between different methods of braking. In addition, we use safety mechanisms to limit motor torque when the

powertrain system reaches elevated temperatures. In such instances, the vehicle s acceleration and speed will decrease. Finally, if the driver permits the battery to substantially deplete its charge, the vehicle will progressively limit motor

torque and speed to preserve the charge that remains. The vehicle will lose speed and ultimately coast to a stop. Despite several warnings about an imminent loss of charge, the ultimate loss of speed may be unexpected. There can be no assurance that

our customers will operate the vehicles properly, especially in these situations. Any accidents resulting from such failure to operate our vehicles properly could harm our brand and reputation, result in adverse publicity and product liability

claims, and have a negative affect on our business, prospects, financial condition and operating results. In addition, if consumers dislike these features, they may choose not to buy additional cars from us which could also harm our business and

prospects.

Developments in alternative technologies or improvements in the internal combustion engine may materially

adversely affect the demand for our electric vehicles.

Significant developments in alternative technologies, such as

advanced diesel, ethanol, fuel cells or compressed natural gas, or improvements in the fuel economy of the internal combustion engine, may materially and adversely affect our business and prospects in ways we do not currently anticipate. For

example, fuel which is abundant and relatively inexpensive in North America, such as compressed natural gas, may emerge as consumers preferred alternative to petroleum based propulsion. Any failure by us to develop new or enhanced technologies

or processes, or to react to changes in existing technologies, could materially delay our development and introduction of new and enhanced electric vehicles, which could result in the loss of competitiveness of our vehicles, decreased revenue and a

loss of market share to competitors.