UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM S-1
REGISTRATION STATEMENT
UNDER
THE SECURITIES ACT OF 1933
Tesla Motors, Inc.
(Exact name of Registrant as
specified in its charter)
Delaware
3711
91-2197729
(State or other jurisdiction of
incorporation or organization)
(Primary Standard Industrial
Classification Code Number)
(I.R.S. Employer
Identification Number)
3500 Deer Creek Road
Palo Alto, California 94304
(650) 413-4000
(Address, including zip code, and telephone number,
including area code, of Registrant s principal executive offices)
Elon Musk
Chief Executive Officer
Tesla Motors, Inc.
3500 Deer Creek Road
Palo Alto, California 94304
(650) 413-4000
(Name, address, including zip code, and telephone number,
including area code, of agent for service)
Copies to:
Larry W. Sonsini
David J. Segre
Mark B. Baudler
Wilson Sonsini Goodrich & Rosati, P.C.
650 Page Mill Road
Palo Alto, California 94304
(650) 493-9300
Kevin P. Kennedy
Simpson Thacher & Bartlett LLP
2550 Hanover Street
Palo Alto, California 94304
(650) 251-5000
Approximate date
of commencement of proposed sale to the public: As soon as practicable after this Registration Statement becomes effective.
If any of the
securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act, check the following box.
If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, please check
the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.
If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the
Securities Act registration statement number of the earlier effective registration statement for the same offering.
If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the
Securities Act registration statement number of the earlier effective registration statement for the same offering.
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller
reporting company. See the definitions of large accelerated filer, accelerated filer and smaller reporting company in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer
Accelerated filer
Non-accelerated filer
(Do not check if a smaller reporting company)
Smaller reporting company
CALCULATION OF
REGISTRATION FEE
Title of Each Class of Securities to be Registered
Proposed
Maximum
Aggregate Offering
Price(1)(2)
Amount of
Registration
Fee
Common Stock, $0.001 par value
$100,000,000
$7,130
(1)
Estimated solely for the purpose of computing the amount of the registration fee pursuant to Rule 457 under the Securities Act of 1933, as amended.
(2)
Includes shares the underwriters have the option to purchase to cover over-allotments, if any.
The Registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until the
Registrant shall file a further amendment which specifically states that this Registration Statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933 or until the Registration Statement shall
become effective on such date as the Commission acting pursuant to said Section 8(a) may determine.
Table of Contents
The information in this preliminary prospectus is not complete and may be changed. These securities
may not be sold until the registration statement filed with the Securities and Exchange Commission is effective. This preliminary prospectus is not an offer to sell nor does it seek an offer to buy these securities in any jurisdiction where the
offer or sale is not permitted.
SUBJECT TO COMPLETION, DATED JANUARY 29, 2010
Shares
Common Stock
This is an initial public offering of shares of common stock of Tesla Motors, Inc.
Tesla Motors is offering of the shares to be sold in the offering.
The selling stockholders identified in this prospectus are offering an additional shares. Tesla Motors will not receive any of the proceeds from the sale of the shares being
sold by the selling stockholders.
Prior to this offering, there has been no public market for the common stock. It is
currently estimated that the initial public offering price per share will be between $ and $ .
Application has been made for listing on the under the symbol
See the section entitled Risk Factors on page
13 to read about factors you should consider before buying shares of the common stock.
Neither the
Securities and Exchange Commission nor any other regulatory body has approved or disapproved of these securities or passed upon the accuracy or adequacy of this prospectus. Any representation to the contrary is a criminal offense.
Per Share
Total
Initial public offering price
Underwriting discount
Proceeds, before expenses, to Tesla Motors
Proceeds, before expenses, to the selling stockholders
To the extent that
the underwriters sell more than shares of common stock, the underwriters have the option to purchase up to an additional
shares from Tesla Motors and shares from the selling stockholders at the initial public offering price
less the underwriting discount.
The underwriters expect to deliver the shares against payment in New York, New York on
, 2010.
Goldman, Sachs & Co.
Morgan Stanley
J.P. Morgan
Deutsche Bank Securities
Prospectus dated
, 2010
Table of Contents
Table of Contents
Table of Contents
Table of Contents
TABLE OF CONTENTS
Page
Prospectus Summary
The Offering
Summary Consolidated Financial Data
10
Risk Factors
13
Special Note Regarding Forward Looking Statements
52
Market, Industry and Other Data
52
Use of Proceeds
53
Dividend Policy
54
Capitalization
55
Dilution
57
Selected Consolidated Financial Data
59
Management s Discussion and Analysis of Financial Condition and Results of
Operations
61
Business
89
Management
122
Executive Compensation
129
Certain Relationships and Related Party Transactions
150
Principal and Selling Stockholders
156
Description of Capital Stock
159
Shares Eligible for Future Sale
164
Material United States Tax Considerations for Non-United States Holders
166
Underwriting
169
Legal Matters
173
Experts
173
Where You Can Find Additional Information
173
Index to Consolidated Financial Statements
F-1
You should rely
only on the information contained in this prospectus and in any free writing prospectus. We, the underwriters and the selling stockholders have not authorized anyone to provide you with information different from that contained in this prospectus.
We, the underwriters and the selling stockholders are offering to sell, and seeking offers to buy, shares of our common stock only in jurisdictions where offers and sales are permitted. The information in this prospectus is accurate only as of the
date of this prospectus, regardless of the time of delivery of this prospectus or any sale of shares of our common stock.
Neither we, the selling stockholders, nor any of the underwriters have done anything that would permit this offering or possession or distribution of this prospectus in any jurisdiction where action for that purpose is required, other
than in the United States. Persons outside the United States who come into possession of this prospectus must inform themselves about, and observe any restrictions relating to, the offering of the shares of common stock and the distribution of this
prospectus outside of the United States.
Table of Contents
PROSPECTUS SUMMARY
This summary highlights information contained elsewhere in this prospectus. You should read the following summary together with the more
detailed information appearing in this prospectus, including Selected Consolidated Financial Data, Management s Discussion and Analysis of Financial Condition and Results of Operations, Risk Factors,
Business and our consolidated financial statements and related notes before deciding whether to purchase shares of our capital stock. Unless the context otherwise requires, the terms Tesla Motors, Tesla, the
Company, we, us and our in this prospectus refer to Tesla Motors, Inc., and its subsidiaries and Tesla store means Tesla retail locations as well as Tesla galleries where we show potential
customers our vehicles but do not consummate sales.
Overview
We design, manufacture and sell high-performance fully electric vehicles and advanced electric vehicle powertrain components. We have
intentionally departed from the traditional automotive industry model by both exclusively focusing on electric powertrain technology and owning our vehicle sales and service network. We are the first and currently only company to commercially
produce a federally-compliant highway-capable electric vehicle, the Tesla Roadster, which combines a market-leading range on a single charge with attractive design, driving performance and zero tailpipe emissions. Introducing the Tesla Roadster
required us to develop a proprietary electric powertrain that incorporates four key components an advanced battery pack, power electronics module, high-efficiency motor and extensive control software. We believe our core intellectual property
contained within our electric powertrain will form the foundation for our planned future vehicles. Since our team combines the innovation and speed to market characteristics of Silicon Valley firms with the experience of leading automotive
companies, we believe that we will be able to rapidly and cost effectively introduce additional vehicles, such as our planned Tesla Model S sedan, and stay at the forefront of the electric automobile industry.
We operate in a fundamentally different manner and structure than traditional automobile manufacturers to pursue what we believe is a
historic opportunity to create an integrated company which successfully commercializes electric vehicles without compromising on range, performance or styling. In addition to designing and manufacturing our vehicles, we sell and service them
through our own sales and service network. This is different from the incumbent automobile companies in the United States who typically franchise their sales and service. We believe our approach will enable us to operate more cost effectively,
provide a better experience for our customers and incorporate customer feedback more quickly into our product development and manufacturing processes. We are continuing to expand our distribution network globally and currently operate a total of 10
Tesla stores in North America and Europe.
The Tesla Roadster, our first vehicle, showcases our technology and illustrates our
leadership in electric vehicle innovation. Introduced in 2008, the Tesla Roadster can accelerate from zero to 60 miles per hour in 3.9 seconds, but produces zero tailpipe emissions. The Tesla Roadster has a battery pack capable of storing
approximately 53 kilowatt-hours of usable energy, almost double the energy of any other commercially available electric vehicle battery pack. The Tesla Roadster has a range of 236 miles on a single charge, as determined by an independent third party
using the United States Environmental Protection Agency s, or EPA s, combined two-cycle city/highway test. Recently, the EPA announced its intention to develop and establish new energy efficiency testing methodologies for electric
vehicles, which we believe could result in a significant decrease to the advertised ranges of all electric vehicles, including ours. The Tesla Roadster reportedly set a new world distance record of 313 miles for a production electric car in a rally
across Australia as part of the 2009 Global Green Challenge. To date, our customers have driven their Tesla Roadsters an estimated 3.0 million miles.
Table of Contents
As of December 31, 2009 we had sold 937 Tesla Roadsters to customers in 18 countries.
In July 2009, less than one year after the date of the commercial introduction of the Tesla Roadster, we introduced a new Roadster model, the Tesla Roadster 2, with improved electric powertrain performance and interior styling, and lower production
costs. At the same time we introduced the Roadster Sport, which accelerates from zero to 60 miles per hour in 3.7 seconds. We delivered our first right-hand drive version of the Tesla Roadster in January 2010, which we believe further demonstrates
our ability to rapidly launch new products.
We intend to continue to develop our electric powertrain technology and introduce
additional vehicles, such as our planned Model S sedan. We are designing the Model S to be a four door, five passenger premium sedan that offers exceptional performance, functionality and attractive styling with zero tailpipe emissions at a
compelling cost of ownership. We are designing the Model S to include a third row with two rear-facing child seats, subject to applicable safety regulations and requirements, allowing us to offer a seven passenger sedan. The drivable early prototype
of the Model S was revealed to the public in March 2009 and despite a limited marketing effort, as of December 31, 2009, we had received approximately 2,000 customer reservations with a minimum refundable payment of $5,000.
The Model S, which is planned to compete in the premium sedan market, is intended to have a significantly broader customer base than the
Tesla Roadster. We currently intend to begin volume production of the Model S in 2012 with a target annual production of up to approximately 20,000 cars per year. We currently anticipate introducing the base Model S at an effective price of $49,900
in the United States, assuming and after giving effect to the continuation of a currently available United States federal tax credit of $7,500 for the purchase of alternative fuel vehicles. Even without this tax credit, we believe the Model S will
be competitive from a pricing perspective with other premium sedans.
In order to meet customer range expectations, we are
designing the planned Model S to offer a variety of range options from 160 miles to 300 miles on a single charge, as projected using the EPA s combined two-cycle city/highway test. The EPA has announced its intention to develop and establish
new energy efficiency testing methodologies for electric vehicles, which we believe could result in a significant decrease to the advertised ranges of all electric vehicles, including ours. The Model S is being designed to be charged at home, but we
are also planning to offer the capability to fast charge the vehicle in as little as forty-five minutes at commercial charging stations that we anticipate may be available in the future. The Model S battery pack is also being designed with the
capability of being rapidly swapped out at specialized commercial battery pack exchange facilities that we anticipate may be available in the future.
We are designing the Model S to have an adaptable platform architecture and common electric powertrain in order to allow us to efficiently create other electric vehicles, which may include a sport utility
vehicle, commercial van or a coupe. By developing our future vehicles from this common platform, we believe we can reduce their development time, and therefore reduce the required additional capital investment. Our long-term goal is to offer
consumers a full range of electric vehicles, including a product line at a lower price point than the planned Model S.
We
have developed a purpose-built electric powertrain to deliver the performance objectives of the Tesla Roadster and our planned future vehicles. The battery pack has been designed to use high volume lithium-ion battery cells and allows for
flexibility with respect to specific lithium-ion chemistry and battery cell manufacturers. This enables us to leverage the significant investments being made globally by the battery industry to improve battery cell performance and lower cost.
Harnessing the energy of a large number of lithium-ion battery cells into an electric vehicle required us to develop sophisticated battery cooling, power, safety and management systems. Delivering the instant power and torque of electric technology
also required us to develop a proprietary alternating current 3-phase induction motor and its associated power electronics. In addition, we developed extensive software systems to manage the overall efficiency, safety and controls of the
Table of Contents
Tesla Roadster and our planned future vehicles. These technology innovations have resulted in an extensive intellectual property portfolio. By utilizing a combination of standard components and
innovative technology, we believe we have engineered what is currently the lowest cost battery pack when measured as a function of cost per kilowatt-hour.
Our electric powertrain is modular and compact, with fewer moving parts than an internal combustion engine, which we believe will enable us to easily adapt the technology to a variety of vehicle
applications. We have developed a relationship with Daimler AG, or Daimler, since March 2008 to apply our technology in a battery pack and charger for Daimler s Smart fortwo electric vehicle. We have been selected by Daimler to supply it with
up to 1,000 battery packs and chargers to support a trial of the Smart fortwo electric vehicle in five European cities. We began shipping the first of these battery packs and chargers in November 2009 and started to recognize revenue for these sales
in the quarter ended December 31, 2009. We intend to expand our electric powertrain production facility in Palo Alto, California to develop and market powertrain components to Daimler and other automobile manufacturers.
We have entered into a $465.0 million long-term loan under the United States Department of Energy s Advanced Technology Vehicles
Manufacturing Incentive Program which will be used to finance the development of a planned integrated manufacturing facility for the Model S as well as our electric powertrain production facility. We also have been granted up to approximately $31
million in tax incentives by the California Alternative Energy and Advanced Transportation Financing Authority. We believe these loans and incentives will help accelerate the time to volume production for both the planned Model S and our electric
powertrain business. In addition, we believe these loans and incentives provide us significant long-term financing that should enable us to focus more of our resources on the execution of our business plans.
We were incorporated in 2003 and began selling the Tesla Roadster in 2008. As of December 31, 2009 we had 514 employees worldwide.
Since inception through September 30, 2009, we have generated $108.2 million in revenue. As of September 30, 2009,
we had an accumulated deficit of $236.4 million and had experienced net losses of $30.0 million for the year ended December 31, 2006, $78.2 million for the year ended December 31, 2007, $82.8 million for the year ended December 31, 2008, and $31.5
million for the nine months ended September 30, 2009.
Industry Overview
We believe incumbent automobile manufacturers are at a crossroads and face significant industry-wide challenges. The reliance on the
gasoline-powered internal combustion engine as the principal automobile powertrain technology has raised environmental concerns, created dependence among industrialized and developing nations on oil largely imported from foreign nations and exposed
consumers to volatile fuel prices. In addition, we believe the legacy investments made by incumbent automobile manufacturers in manufacturing and technology related to the internal combustion engine have to date inhibited rapid innovation in
alternative fuel powertrain technologies.
We believe that shifting consumer preferences together with increasing government
regulation and incentives will result in significant growth in the market for electric vehicles. We believe many consumers are increasingly willing to consider buying electric-based vehicles due to the environmental, economic and national security
consequences of using gasoline-powered vehicles, as demonstrated by the increased sales of hybrid electric vehicles in recent years. We also believe government regulations and incentives are accelerating the growth of the electric vehicle market.
Many governments in countries throughout the world are regulating vehicle emissions and fuel economy standards and offering incentives to consumers to purchase more energy efficient vehicles. According to Frost & Sullivan, a business research
and consulting firm, the market for electric-
Table of Contents
based vehicles, which includes electric vehicles, hybrid electric vehicles, and plug-in hybrid electric vehicles, is expected to grow to approximately 10.6 million units worldwide, or
approximately 14% of new vehicles sold by 2015 from approximately 1.75 million units or 3% of new vehicles sold in 2008.
We
believe incumbent automobile manufacturers face significant challenges that will continue to inhibit their ability to capitalize fully on the electric vehicle opportunity, including:
Dependence on the Internal Combustion Engine. We believe many incumbent automobile manufacturers have to date failed to aggressively pursue
alternative fuel vehicle programs because of their continued need to invest in internal combustion engine technologies that support their existing revenue base and core competencies.
Limited Electric Powertrain Expertise. To date, many incumbent automobile manufacturers have pursued multiple alternative fuel programs and, in
doing so, have outsourced key components of alternative fuel powertrain development. By exploring a diverse range of alternative fuel programs while simultaneously continuing to invest in the internal combustion engine, we believe incumbent
automobile manufacturers have diluted their efforts to build competencies in a specific alternative fuel powertrain technology such as electric powertrains.
Profitability Pressures and Reduced Operating Flexibility. Many incumbent automobile manufacturers have recently faced deteriorating margins and
liquidity, which we believe has significantly reduced their operating flexibility and their ability to invest in alternative fuel programs that they may not view as their core business.
Long and Expensive New Product Development Process. New product launches by incumbent automobile manufacturers from development to production
are often lengthy and require significant capital investments.
Despite the automobile industry s
challenges, incumbent automobile manufacturers have attempted over time to respond to shifting consumer desires and government mandates by incorporating elements of electric propulsion into their vehicles by introducing hybrid powertrains. Although
hybrid electric vehicles address some of the concerns associated with the historical reliance on the internal combustion engine, we believe they are a transitional technology between internal combustion engine vehicles and fully electric vehicles.
The increased complexity and weight of the dual powertrain system inherent in hybrid and plug-in hybrid electric vehicles forces engineering compromises which result in a less energy efficient vehicle and generally limits performance. Consequently,
these hybrid vehicles do not realize the full benefits of electric propulsion, and still consume gasoline and produce emissions. While incumbent automobile manufacturers may recognize the benefits of electric propulsion, we believe that due to
technology limitations and their relatively limited expertise in battery, software, and electric powertrain technologies, incumbent automobile manufacturers have to date been unable to design and offer a commercially successful electric vehicle that
offers compelling range, vehicle design and performance at an affordable cost.
Our Solution
We design, manufacture and sell high-performance fully electric vehicles and advanced electric vehicle powertrain components through our
highly differentiated business model. We intend to leverage our proprietary electric powertrain system developed for the Tesla Roadster to form the basis for our planned Model S sedan. We believe our combination of engineering and management
expertise from Silicon Valley and the automotive industry, together with our operational structure, will help us to rapidly innovate and to cost efficiently introduce new vehicles and technologies. By owning our sales and service network, we believe
we can offer a compelling customer experience while achieving operating efficiencies and capturing sales and service revenues that incumbent automobile manufacturers do not receive in the traditional franchised dealer model. We also plan to
Table of Contents
leverage our electric powertrain technology to develop and sell powertrain components to other manufacturers, such as the battery packs and chargers we have recently begun to sell to Daimler.
We believe our proprietary electric powertrain system will enable us to design and develop zero emission vehicles that
overcome the design, styling, and performance issues that have historically limited broad consumer adoption of electric vehicles. As a result, we believe customers of our vehicles will enjoy many benefits, including:
Long Range and Recharging Flexibility. The Tesla Roadster has been designed to provide range capabilities significantly in excess of any current
and prior generation electric vehicles. We are designing our planned Model S to offer a variety of intermediate range options as well as a range option extending beyond that of the Tesla Roadster. In addition, the Tesla Roadster incorporates our
proprietary on-board charging system, permitting recharging from almost any available electrical outlet, and we are designing the Model S to offer fast charging capability from higher power electrical outlets.
Energy Efficiency and Cost of Ownership. We believe our Tesla Roadster offers and our planned Model S will offer consumers an attractive cost of
ownership when compared to similar internal combustion engine or hybrid electric vehicles. By using a single powertrain and customizing the systems within the electric powertrain and the rest of the vehicle, our vehicles are more energy efficient,
and therefore less expensive to operate, than currently available hybrid or internal combustion engine vehicles.
High-Performance Without Compromised Design or Functionality. With the Tesla Roadster, we believe we have been able to successfully overcome the
design and performance tradeoff issues that encumbered earlier electric vehicle designs. We believe the Tesla Roadster offers our customers an unparalleled driving experience with instantaneous and sustained acceleration through an extended range of
speed. We intend to apply such advancements to our future vehicles.
Our Competitive Strengths
We believe the following strengths position us well to capitalize on the expected growth in the electric vehicle market:
Singular Focus and Leadership in Electric Powertrain Technology. We are focused exclusively on developing our electric vehicles and electric
powertrain technology to achieve a compelling combination of range and performance in our vehicles. We intend to use our electric powertrain expertise to innovate rapidly and sustain technological and time to market advantages over incumbent
automobile manufacturers.
Combination of Expertise from Silicon Valley and the Traditional Automotive Industry. Our roots in Silicon Valley have enabled us to recruit
engineers with strong skills in electrical engineering, software and controls, which we have complemented with significant automotive expertise in vehicle engineering and manufacturing from other members or our team.
Proprietary Systems Integration of Vehicle and Electric Powertrain. We believe that our ability to combine our electric powertrain expertise
with our vehicle engineering expertise provides a broad capability in electric vehicle design and systems integration.
Rapid Customer Focused Product Development. We have designed our product development process to rapidly react to data collected from our
vehicles and the direct interaction with our customers at our company-owned stores, which we believe will enable us to rapidly introduce new vehicles and features.
Ownership of Sales and Service Network. We intend for our distribution and service network to offer a compelling customer experience while
achieving operating efficiencies and capturing sales and service
Table of Contents
revenues incumbent automobile manufacturers do not generally receive in the traditional franchised distribution and service network model.
Brand Leadership. We believe the Tesla brand is well recognized in our target market and is associated with high performance, long range
electric vehicles, despite limited marketing spending to date. In November 2009, Advertising Age provided testament to our brand strength by selecting Tesla as one of America s hottest brands in a special report highlighting the
year s 50 top brands.
Substantial Funding in Place to Accelerate Growth. We believe our $465.0 million loan facility agreement under the United States Department of
Energy s Advanced Technology Vehicles Manufacturing Incentive Program provides significant long-term financing that will enable us to focus on executing our business plans.
Capital Efficiency. We believe our rapid product development process, our modular and adaptable powertrain, our plan to design and manufacture
multiple product types on a singular platform, and our ability to hold lower inventory levels while still meeting customer demand will help reduce the capital required to reach operating efficiencies. This approach is designed with the aim of
allowing us to achieve profitability at relatively low volumes and create a viable long-term business.
Our Strategy
We intend to be a leading global manufacturer and direct seller of electric vehicles and electric vehicle technologies. Key
elements of our strategy include:
Successfully Launch the Model S. We believe the successful launch of the planned Model S is critical to our ability to capitalize on the
electric vehicle market opportunity. We are currently executing a detailed plan to finish the design, engineering and component sourcing for the Model S and to build out the manufacturing facility and obtain the equipment to support its production
with the goal of commercial introduction of the Model S in 2012.
Use a Common Platform to Introduce New Models. We intend to design the Model S with an adaptable platform architecture and common electric
powertrain, to provide us the flexibility to use the Model S platform to cost efficiently launch new electric vehicle models subsequent to the start of production of the Model S.
Develop Integrated Engineering and Manufacturing Capabilities. We intend to develop a substantially-integrated electric vehicle manufacturing
facility, allowing our design, vehicle engineering, and manufacturing teams to work alongside one another to streamline the feedback loop for rapid product enhancements and quality improvements.
Continue to Focus on Technological Advancement and Cost Improvement. We intend to continue to further develop our proprietary electric
powertrain system, specifically its range capabilities, while continuing to reduce its manufacturing cost.
Expand our Company-Owned Sales and Service Network. As of December 31, 2009, we had opened 10 Tesla owned stores in the United States and
Europe, and we plan to nearly double the number of Tesla stores opened by the end of 2010, with a goal of establishing approximately 50 stores globally within the next several years in connection with the planned Model S rollout.
Leverage Industry Advancements in Battery Cells. We intend to leverage the substantial investments being made globally by battery cell
manufacturers, as we have designed our powertrain technology to permit flexibility with respect to battery cell chemistry, form factor and vendor.
Build and Leverage Strategic Relationships. We intend to establish and develop strategic relationships with industry leaders to launch our
planned electric vehicles and sell our electric vehicle powertrain components.
Table of Contents
Risks Affecting Us
Our business is subject to a number of risks and uncertainties that you should understand before making an investment decision. These risks are discussed more fully in the section entitled Risk
Factors following this prospectus summary. These include:
our limited operating history makes evaluating our business and future prospects difficult, and may increase the risk of your investment;
we have a history of losses and we expect significant increases in our costs and expenses to result in continuing losses for at least the foreseeable
future;
our future growth is dependent upon consumers willingness to adopt electric vehicles;
we are dependent upon our ability to fully draw down on our loan facility from the United States Department of Energy, which may restrict our ability
to conduct our business;
our distribution model is different from the predominant current distribution model for automobile manufacturers, which makes evaluating our business,
operating results and future prospects difficult;
we are almost entirely dependent upon revenue generated from the sale of our electric vehicles, specifically the Tesla Roadster, in the near term, and
our future success will be dependent upon our ability to design and achieve market acceptance of new vehicle models, and specifically the Model S;
we anticipate that we will experience a decrease in revenues and increase in losses prior to the launch of the Model S;
our production model for the non-powertrain portion of the Model S is unproven, still evolving and is very different from the non-powertrain portion of
the production model for the Tesla Roadster; and
we may experience significant delays in the design, manufacture, launch and financing of the Model S.
Corporate Information
We
are headquartered in Palo Alto, California. Our principal executive offices are located at 3500 Deer Creek Road, Palo Alto, California 94304, and our telephone number at this location is (650) 413-4000. Our website address is
www.teslamotors.com. Information contained on our website is not incorporated by reference into this prospectus and you should not consider information on our website to be part of this prospectus. We were incorporated in 2003.
The Tesla Motors design logo, Tesla Motors, Tesla Roadster, Model S and other trademarks or
service marks of Tesla Motors appearing in this prospectus are the property of Tesla Motors. When used herein, the term Tesla store means Tesla retail locations as well as Tesla galleries where we show potential customers our vehicles
but do not consummate sales. This prospectus contains additional trade names, trademarks and service marks of other companies. We do not intend our use or display of other companies tradenames, trademarks or service marks to imply a
relationship with, or endorsement or sponsorship of us by, these other companies.
Table of Contents
THE OFFERING
Common stock we are offering
shares
Common stock offered by the selling stockholders
shares
Common stock to be outstanding after this offering
shares
Use of proceeds
We may use a portion of the net proceeds from this offering to fund planned capital expenditures, working capital and other general corporate purposes. Under our loan facility with the United
States Department of Energy, which we refer to herein as our DOE Loan Facility, we have agreed to spend up to $33 million plus any cost overruns we may encounter in developing our anticipated powertrain and Model S manufacturing facilities. In
addition to this obligation, we have agreed to set aside 50% of the net proceeds from this offering to fund a separate, dedicated account under our DOE Loan Facility to fund project costs for our anticipated powertrain and Model S manufacturing
facilities that would otherwise have been funded through advances made under the DOE Loan Facility, which funds will be reimbursed by the DOE once they have been used in full. We currently anticipate making aggregate capital expenditures of between
$100 million and $125 million during the year ended December 31, 2010. See Use of Proceeds.
Directed share program
The underwriters have reserved for sale, at the initial public offering price, up to shares of our common stock being
offered for sale to business associates, employees and friends and family members of our employees and Tesla customers who have received delivery of a Tesla Roadster from Tesla. The number of shares available for sale to the general public in this
offering will be reduced to the extent these persons purchase reserved shares. Any reserved shares not purchased will be offered by the underwriters to the general public on the same terms as the other shares.
Proposed symbol
The number of shares of common stock that will be outstanding after this offering is based on the shares outstanding as of
September 30, 2009 and excludes:
10,627,629 shares of common stock issuable upon the exercise of options outstanding at September 30, 2009 at a weighted average exercise price of
$0.74 per share;
25,881,673 shares of common stock issuable upon exercise of options granted after September 30, 2009 at a weighted average exercise price of $2.20 per
share;
9,255,035 shares of common stock issuable upon the exercise of a warrant granted to the DOE in connection with the closing of our DOE Loan Facility on
January 20, 2010, at an exercise price of $2.5124 per share; and
40,042,380 shares of common stock reserved for future issuance under our stock-based compensation plans, consisting of 35,042,380 shares of common
stock reserved for issuance under our 2010 Equity Incentive Plan and 5,000,000 shares of common stock reserved for issuance under our 2010 Employee
Table of Contents
Stock Purchase Plan and shares that become available under the 2010 Equity Incentive Plan and 2010 Employee Stock Purchase Plan pursuant to provisions thereof that automatically increase the
share reserves under the plans each year, as more fully described in Management Employee Benefit Plans. The 2010 Equity Incentive Plan and the 2010 Employee Stock Purchase Plan will become effective on the date of this offering.
Unless otherwise indicated, all information in this prospectus assumes:
the automatic conversion of all outstanding shares of our preferred stock into an aggregate of 210,680,690 shares of common stock effective immediately
prior to the closing of this offering;
a for
stock split of our outstanding capital stock that was effected in , 2010;
the issuance of shares of common stock upon the net exercise of convertible
preferred stock warrants that would otherwise expire upon the completion of this offering at an assumed initial public offering price of $ per share;
the filing of our amended and restated certificate of incorporation upon the completion of this offering; and
no exercise by the underwriters of their right to purchase up to an additional
shares of common stock from us and the selling stockholders.
Table of Contents
SUMMARY CONSOLIDATED FINANCIAL DATA
The following summary consolidated financial data for the years ended December 31, 2006, 2007 and 2008 are derived from our audited
consolidated financial statements that are included elsewhere in this prospectus. The summary unaudited consolidated financial data for the nine months ended September 30, 2008 and 2009 and as of September 30, 2009 are derived from our
unaudited consolidated financial statements for such periods and dates, which are included elsewhere in this prospectus. The unaudited consolidated financial statements were prepared on a basis consistent with our audited consolidated financial
statements and include, in the opinion of management, all adjustments necessary for the fair presentation of the financial information contained in those statements. The historical results presented below are not necessarily indicative of financial
results to be achieved in future periods.
Prospective investors should read these summary consolidated financial data
together with Management s Discussion and Analysis of Financial Condition and Results of Operations and our consolidated financial statements and the related notes included elsewhere in this prospectus.
Years Ended December 31,
Nine Months Ended September 30,
2006
2007
2008
2008
2009
(in thousands, except for share and per share data)
Consolidated Statements of Operations Data:
Automotive sales (including zero emission vehicle credit sales of $3,458, $495 and $7,645, for the periods ended
December 31, 2008, September 30, 2008 and 2009, respectively)
73
14,742
580
93,358
Cost of sales(1)
15,883
19
85,604
Gross profit (loss)
64
(1,141
561
7,754
Operating expenses(1):
Research and development (net of development compensation of $17,170 for the period ended September 30,
2009)
24,995
62,753
53,714
41,888
11,139
Selling, general and administrative
5,436
17,244
23,649
13,953
25,587
Total operating expenses
30,431
79,997
77,363
55,841
36,726
Loss from operations
(30,431
(79,933
(78,504
(55,280
(28,972
Interest income
938
1,749
529
486
97
Interest expense
(423
(3,747
(2,648
(2,506
Other income (expense), net(2)
59
137
(963
231
(320
Loss before income taxes
(29,857
(78,047
(82,685
(57,211
(31,701
Provision (benefit) for income taxes
100
110
97
73
(203
Net loss
(29,957
(78,157
(82,782
(57,284
(31,498
Net loss per share of common stock, basic and diluted(3)
(3.39
(7.56
(4.15
(2.88
(1.51
Shares used in computing net loss per share of common stock, basic and diluted(3)
8,824,264
10,331,420
19,929,512
19,872,823
20,928,840
Pro forma net loss per share of common stock, basic and diluted(2)(4) (unaudited)
Shares used in computing the pro forma net loss per share of common stock, basic and diluted(2)(4) (unaudited)
10
Table of Contents
(1)
Includes stock-based compensation expense as follows:
Years Ended December 31,
Nine Months Ended September 30,
2006
2007
2008
2008
2009
(in thousands)
Cost of sales
26
16
54
Research and development
17
95
125
82
193
Selling, general and administrative
103
286
124
202
Total
23
198
437
222
449
(2)
In January 2010, we issued a warrant to the DOE in connection with the closing of the DOE Loan Facility to purchase shares of our Series E convertible preferred
stock. This convertible preferred stock warrant will become a warrant to purchase shares of our common stock upon the closing of this offering. Beginning on December 15, 2018 and until December 14, 2022, the shares subject to purchase
under the warrant will become exercisable in quarterly amounts depending on the average outstanding balance of the DOE Loan Facility during the prior quarter. Since the number of shares of common stock ultimately issuable under the warrant will
vary, this warrant will be carried at its estimated fair value with changes in fair value reflected in other income (expense), net, until its expiration or exercise. Potential common shares issuable upon exercise of the DOE warrant will be excluded
from the calculation of diluted net loss per share of common stock until such time as we generate a net profit in a given period.
(3)
Our basic net loss per share of common stock is calculated by dividing the net loss by the weighted-average number of shares of common stock outstanding for the period.
The diluted net loss per share of common stock is computed by dividing the net loss by the weighted-average number of common shares, excluding common shares subject to repurchase, and, if dilutive, potential common shares outstanding during the
period. Potential common shares consist of stock options to purchase common stock and warrants to purchase convertible preferred stock (using the treasury stock method) and the conversion of our convertible preferred stock and convertible notes
payable (using the if-converted method). For purposes of all these calculations, potential common shares have been excluded from the calculation of diluted net loss per share of common stock as their effect is antidilutive since we generated a net
loss in each period.
(4)
Pro forma basic and diluted net loss per share of common stock has been computed to give effect to the conversion of the convertible preferred stock into common stock.
Also, the numerator in the pro forma basic and diluted net loss per share calculation has been adjusted to remove gains and losses resulting from remeasurements of the convertible preferred stock warrant liability as it is assumed that these
warrants will be exercised immediately prior to a qualifying initial public offering and will no longer require periodic revaluation.
11
Table of Contents
Our consolidated balance sheet data as of September 30, 2009 is presented:
on an actual basis;
on a pro forma basis to give effect to (i) the conversion of all outstanding shares of our convertible preferred stock into 210,680,690 shares of
our common stock, (ii) the issuance of shares of our common stock upon the assumed net exercise of convertible preferred stock warrants that would otherwise expire upon the
completion of this offering at an assumed initial public offering price of $ per share, which is the mid-point of the range set forth on the cover page of this prospectus and
(iii) the initial funds borrowed under our DOE Loan Facility in 2010 of $ ; and
on a pro forma as adjusted basis to give effect to the pro forma adjustments as well as the sale of
shares of common stock by us in this offering at an assumed initial public offering price of $ per
share, which is the mid-point of the range set forth on the cover page of this prospectus, and after deducting estimated underwriting discounts and commissions and estimated offering expenses payable by us.
As of September 30, 2009
Actual
Pro
Forma
Pro Forma As
Adjusted(1)
(Unaudited)
(in thousands)
Consolidated Balance Sheet Data:
Cash and cash equivalents
106,547
Restricted cash(2)
3,580
Property and equipment, net
19,473
Working capital
70,951
Total assets
155,916
Convertible preferred stock warrant liability
1,010
Capital lease obligations, less current portion
711
Long-term debt, less current portion(3)
Convertible preferred stock
319,225
Total stockholders deficit
(230,645
(1)
Each $1.00 increase or decrease in the assumed initial public offering price of $ per share, the
midpoint of the range reflected on the cover page of this prospectus, would increase or decrease, as applicable, our cash and cash equivalents, working capital, total assets and total stockholders equity (deficit) by approximately
$ million, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and after deducting the estimated underwriting
discounts and commissions and estimated offering expenses payable by us.
(2)
The restricted cash represents security deposits related to lease agreements, equipment financing, as well as security held by a vendor as part of the vendor s
standard credit policies. On a pro forma basis, the restricted cash also represents the portion of the proceeds from this offering that we are required to hold in a separate dedicated account pursuant to our DOE Loan Facility to fund certain costs
of our powertrain and Model S manufacturing facility projects.
(3)
On January 20, 2010, we entered into a loan agreement with the United States Federal Financing Bank, or the FFB, and the DOE, pursuant to the Advanced Technology
Vehicles Manufacturing Incentive Program, or the ATVM Program. Under such facility, the FFB has made available to us two multi-draw term loan facilities in an aggregate principal amount of up to $465.0 million. Up to an aggregate principal
amount of $101.2 million will be made available under the first term loan facility to finance up to 80% of the costs eligible for funding under the ATVM Program for the build out of a facility to design and manufacture lithium-ion battery packs,
electric motors and electric components. Up to an aggregate principal amount of $363.9 million will be made available under the second term loan facility to finance up to 80% of the costs eligible for funding under the ATVM Program for the
development of, and to build out the manufacturing facility for the Model S sedan. See the section titled Business Governmental Programs, Incentives and Regulations United States Department of Energy Loans below for additional
information.
12
Table of Contents
RISK FACTORS
Investing in our common stock involves a high degree of risk. You should carefully consider the following risks and all other information
contained in this prospectus, including our consolidated financial statements and the related notes, before investing in our common stock. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties
that we are unaware of, or that we currently believe are not material, also may become important factors that may adversely affect us and our prospects materially. If any of the following risks materialize, our business, prospects, financial
condition and operating results could be materially harmed. In such case, the price of our common stock could decline, and you may lose some or all of your investment.
Risks Related to Our Business and Industry
Our limited operating
history makes evaluating our business and future prospects difficult, and may increase the risk of your investment.
You must consider the risks and difficulties we face as an early stage company with limited operating history. If we do not successfully address these risks, our business, prospects, operating results and financial condition will be
materially and adversely harmed. We were formed in July 2003. We began delivering our first performance electric vehicle, the Tesla Roadster, in early 2008, and as of December 31, 2009 we had only sold 937 production vehicles to customers, almost
all of which were sold in the United States and Europe. Our revenues were approximately $14.7 million for the year ended December 31, 2008 and approximately $93.4 million for the nine months ended September 30, 2009. We have a very limited
operating history on which investors can base an evaluation of our business, operating results and prospects. To date we have derived our revenues principally from sales of the Tesla Roadster and related sales of zero emission vehicle credits, and
to a lesser extent on products and services related to electric powertrain sales. We intend in the longer term to derive substantial revenues from the sales of our planned Model S sedan electric vehicle which is at an early stage of development and
which we do not expect to be in production until 2012. We have no operating history with respect to the Model S electric vehicle and have only recently begun the component procurement process for the Model S, which limits our ability to accurately
forecast the cost of the vehicle. In addition, we have not yet completed the site selection process for the location of our manufacturing facility to produce such vehicles, finalized the design or completed our engineering, manufacturing or
component supply plans for the Model S. In addition, to date our powertrain sales and powertrain research and development compensation have been exclusively generated under arrangements with Daimler AG, or Daimler, for the development and sale of a
battery pack and a charger for Daimler s Smart fortwo electric vehicle. Blackstar Investco LLC, or Blackstar, an affiliate of Daimler, holds more than 5% of our outstanding capital stock. Other than our arrangement with Daimler, we have not
entered into a development or sales agreement for our electric powertrain business. There are no assurances that we will be able to secure future business with Daimler.
It is difficult to predict our future revenues and appropriately budget for our expenses, and we have limited insight into trends that may emerge and affect our business. In the event that actual results
differ from our estimates or we adjust our estimates in future periods, our operating results and financial position could be materially affected.
In addition, our revenues to date have included amounts we receive from selling zero emission vehicle, or ZEV, credits to other automobile manufacturers, pursuant to certain state regulations. We have
entered into an agreement with an automobile manufacturer for the sale of the ZEV credits that we earn from the sale of vehicles that we manufactured between January 1, 2009 and December 31, 2009, and we have until June 30, 2010 to
sell these ZEV credits under the agreement. We are currently negotiating to extend this agreement for vehicles manufactured in 2010 and 2011. As of December 31, 2009, we had sold credits for 340 vehicles under this agreement and for the year ended
December 31, 2008 and the nine months ended September 30, 2009, we recognized revenue from the sale of ZEV credits of $3.5 million and $7.6 million, respectively. We may not be
13
Table of Contents
able to enter into another agreement to sell these credits on equivalent terms and if this occurs, our financial results will be harmed.
We have a history of losses and we expect significant increases in our costs and expenses to result in continuing losses for at least
the foreseeable future.
We incurred a net loss of approximately $31.5 million for the nine months ended
September 30, 2009 and have incurred net losses of approximately $236.4 million from our inception through September 30, 2009. We have had net losses in each quarter since our inception. We believe that we will continue to incur operating
and net losses until at least the time we begin significant deliveries of the Model S, which is not expected to occur until 2012, or possibly later. Even if we are able to successfully develop the Model S, there can be no assurance that it will be
commercially successful. If we are to ever achieve profitability it will be dependent upon the successful development and successful commercial introduction and acceptance of automobiles such as the Model S, which may not occur.
We expect the rate at which we will incur losses to increase significantly in future periods from current levels as we:
design, develop and manufacture our planned Model S;
design, develop and manufacture components of our electric powertrain;
develop and equip manufacturing facilities to produce our Model S;
build up inventories of parts and components for our Model S;
develop and equip manufacturing facilities to produce our electric powertrain components;
open new Tesla stores;
expand our design, development, maintenance and repair capabilities;
increase our sales and marketing activities; and
increase our general and administrative functions to support our growing operations.
Because we will incur the costs and expenses from these efforts before we receive any incremental revenues with respect thereto, our losses
in future periods will be significantly greater than the losses we would incur if we developed our business more slowly. In addition, we may find that these efforts are more expensive than we currently anticipate or that these efforts may not result
in increases in our revenues, which would further increase our losses.
In addition, as of December 31, 2007, 2008 and
September 30, 2009, we had recorded a full valuation allowance on our United States net deferred tax assets as at this point we believe it is more likely than not that we will not achieve profitability and accordingly be able to use our
deferred tax assets in the foreseeable future. In addition, we have not yet determined whether this offering would constitute an ownership change resulting in limitations on our ability to use our net operating loss and tax credit carry-forwards. If
an ownership change is deemed to have occurred as a result of this offering, utilization of these assets could be significantly reduced.
Our future growth is dependent upon consumers willingness to adopt electric vehicles.
Our growth is highly dependent upon the adoption by consumers of, and we are subject to an elevated risk of any reduced demand for, alternative fuel vehicles, generally, and electric vehicles in
particular. If consumers do not adopt electric vehicles, our business, prospects, financial condition and operating results will be harmed. The market for alternative fuel vehicles is relatively new, rapidly evolving, characterized by rapidly
changing technologies, price competition, additional competitors, evolving government regulation and industry standards,
14
Table of Contents
frequent new vehicle announcements and changing consumer demands and behaviors. Factors that may influence the adoption of alternative fuel vehicles, and specifically electric vehicles, include:
perceptions about electric vehicle quality, safety (in particular with respect to lithium-ion battery packs), design, performance and cost, especially
if adverse events or accidents occur that are linked to the quality or safety of electric vehicles;
the limited range over which electric vehicles may be driven on a single battery charge;
the decline of an electric vehicle s range resulting from deterioration over time in the battery s ability to hold a charge;
concerns about electric grid capacity and reliability, which could derail our past and present efforts to promote electric vehicles as a practical
solution to vehicles which require gasoline;
the availability of alternative fuel vehicles, including plug-in hybrid electric vehicles;
improvements in the fuel economy of the internal combustion engine;
the availability of service for electric vehicles;
consumers desire and ability to purchase a luxury automobile or one that is perceived as exclusive;
the environmental consciousness of consumers;
volatility in the cost of oil and gasoline;
consumers perceptions of the dependency of the United States on oil from unstable or hostile countries, and government regulations and economic
incentives promoting fuel efficiency and alternate forms of energy;
access to charging stations, standardization of electric vehicle charging systems and consumers perceptions about convenience and cost to charge
an electric vehicle;
the availability of tax and other governmental incentives to purchase and operate electric vehicles or future regulation requiring increased use of
nonpolluting vehicles;
perceptions about and the actual cost of alternative fuel; and
macroeconomic factors.
In addition, recent reports have suggested the potential for extreme temperatures to affect the range or performance of electric vehicles. For example, certain recent reports have suggested that electric
vehicles operated in colder temperatures may experience a reduced overall range as batteries may lose the ability to hold a charge more rapidly in cold weather. If such reports gain widespread acceptance, our ability to market and sell our vehicles
may be adversely impacted.
Additionally, we may become subject to regulations that may require us to alter the design of our
vehicles, which could negatively impact consumer interest in our vehicles. For example, our electric vehicles make less noise than internal combustion vehicles. We are aware of advocacy groups, such as U.S. National Federation of the Blind, which
are lobbying for regulations to require electric vehicle manufacturers to adopt minimum sound standards. We believe the relative quiet of our vehicles is one of its appealing aspects and any requirement to change this aspect may negatively affect
consumer interest in our vehicles.
The influence of any of the factors described above may cause current or potential
customers not to purchase our electric vehicles, which would seriously harm our business, operating results, financial condition and prospects.
15
Table of Contents
The range of our electric vehicles on a single charge declines over time which may
negatively influence potential customers decisions whether to purchase our vehicles.
The range of our electric
vehicles on a single charge declines principally as a function of usage, time, and charging patterns. For example, a customer s use of their Tesla vehicle as well as the frequency with which they charge the battery of their Tesla vehicle can
result in additional deterioration of the battery s ability to hold a charge. We currently expect that our battery pack will retain approximately 60-65% of its ability to hold its initial charge after approximately 100,000 miles or 7 years,
which will result in a decrease to the vehicle s initial range. Such battery deterioration and the related decrease in range may negatively influence potential customer decisions whether to purchase our vehicles, which may harm our ability to
market and sell our vehicles.
The operation of our vehicles is different from internal combustion engine vehicles and
may be unfamiliar to customers.
We have designed our vehicles to minimize inconvenience and inadvertent driver damage
to the powertrain. In certain instances, these protections may cause the vehicle to behave in ways that are unfamiliar to drivers of internal combustion vehicles. For example, we employ regenerative braking to recharge the battery in most modes of
vehicle operation. Our customers may become accustomed to using this regenerative braking instead of the wheel brakes to slow the vehicle. However, when the vehicle is at maximum charge, the regenerative braking is not needed and is not employed.
Accordingly, our customers may have difficulty shifting between different methods of braking. In addition, we use safety mechanisms to limit motor torque when the powertrain system reaches elevated temperatures. In such instances, the vehicle s
acceleration and speed will decrease. Finally, if the driver permits the battery to substantially deplete its charge, the vehicle will progressively limit motor torque and speed to preserve the charge that remains. The vehicle will lose speed and
ultimately coast to a stop. Despite several warnings about an imminent loss of charge, the ultimate loss of speed may be unexpected. There can be no assurance that our customers will operate the vehicles properly, especially in these situations. Any
accidents resulting from such failure to operate our vehicles properly could harm our brand and reputation, result in adverse publicity and product liability claims, and have a negative affect on our business, prospects, financial condition and
operating results. In addition, if consumers dislike these features, they may choose not to buy additional cars from us which could also harm our business.
Developments in alternative technologies or improvements in the internal combustion engine may materially adversely affect the demand for our electric vehicles.
Significant developments in alternative technologies, such as advanced diesel, ethanol, fuel cells or compressed natural gas, or improvements
in the fuel economy of the internal combustion engine, may materially and adversely affect our business and prospects in ways we cannot anticipate. Any failure by us to develop new or enhanced technologies or processes, or to react to changes in
existing technologies, could materially delay our development and introduction of new and enhanced electric vehicles, which could result in the loss of competitiveness of our vehicles, decreased revenue and a loss of market share to competitors.
If we are unable to keep up with advances in electric vehicle technology, we may suffer a decline in our competitive
position.
We may be unable to keep up with changes in electric vehicle technology and, as a result, may suffer a
decline in our competitive position. Any failure to keep up with advances in electric vehicle technology would result in a decline in our competitive position which would materially and adversely affect our business, prospects, operating results and
financial condition. Our research and development efforts may not be sufficient to adapt to changes in, or create the necessary technology, independently. As technologies change, we plan to upgrade or adapt our vehicles and introduce new models in
order to continue to provide vehicles with the latest technology, in particular battery cell technology. However, our vehicles may not compete effectively with alternative vehicles if we are not able to source and integrate the latest technology
into our vehicles. For example, we do not manufacture battery cells which makes us dependent upon other suppliers of battery cell technology for our battery packs.
16
Table of Contents
We are dependent upon our ability to fully draw down on our loan facility from the
United States Department of Energy, which may restrict our ability to conduct our business.
Our plan for manufacturing
the Model S and for developing our electric powertrain facility depends on our ability to fully draw down on our loan facility from the United States Department of Energy, or the DOE, under the DOE s Advanced Technology Vehicles Manufacturing
Incentive Program, or ATVM Program. We have entered into a loan facility with the Federal Financing Bank, or the FFB, that is guaranteed by the DOE and which we refer to as the DOE Loan Facility. Our DOE Loan Facility provides for a $465.0 million
loan facility under the DOE s ATVM Program to help finance the continued development of the Model S, including the planned build out and operation of a manufacturing facility, and to finance the planned build out and operation of our electric
powertrain manufacturing facility. We cannot, however, access all of these funds at once, but only over a period of up to three years through periodic draws as eligible costs are incurred. Our ability to draw down these funds under the DOE Loan
Facility is conditioned upon several draw conditions. For the Model S manufacturing facility project, the draw conditions include our achievement of progress milestones relating to the design and development of the Model S and the planned
Model S manufacturing facility, including an environmental assessment of such facility approved by the DOE and the completion of the National Environmental Policy Act process. For the electric powertrain manufacturing facility, the draw
conditions include our achievement of progress milestones relating to the development of the powertrain manufacturing facility and the successful development of commercial arrangements with third parties for the supply of powertrain components.
Additionally, the DOE Loan Facility will require us to comply with certain operating covenants and will place additional restrictions on our ability to operate our business. We are unaccustomed to managing our business with such restrictions and
others that are associated with a significant credit agreement. If we are unable to draw down the anticipated funds under the DOE Loan Facility, or our ability to make such draw downs is delayed, we may need to obtain additional or alternative
financing to operate our Model S and electric powertrain manufacturing facilities to the extent our cash on hand is insufficient. Any failure to obtain the DOE funds or secure other alternative funding could materially and adversely affect our
business and prospects. Such additional or alternative financing may not be available on attractive terms, if at all, and could be more costly for us to obtain. As a result, our plans for building our Model S and electric powertrain
manufacturing plants could be significantly delayed which would adversely affect our business, prospects, financial condition and operating results.
Our DOE Loan Facility documents contain customary covenants that include, among others, a requirement that the project be conducted in accordance with the business plan for such project, compliance with
all requirements of the ATVM Program, and limitations on our and our subsidiaries ability to incur indebtedness, incur liens, make investments or loans, enter into mergers or acquisitions, dispose of assets, pay dividends or make distributions
on capital stock, prepay indebtedness, pay management, advisory or similar fees to affiliates, enter into certain affiliate transactions, enter into new lines of business, and enter into certain restrictive agreements. These restrictions may limit
our ability to operate our business and may cause us to take actions or prevent us from taking actions we believe are necessary from a competitive standpoint or that we otherwise believe are necessary to grow our business.
Our distribution model is different from the predominant current distribution model for automobile manufacturers, which makes
evaluating our business, operating results and future prospects difficult.
Our distribution model is not common in the
automobile industry today, particularly in the United States. We plan to continue to sell our performance electric vehicles over the internet and in company-owned Tesla stores. This model of vehicle distribution is relatively new and unproven,
especially in the United States, and subjects us to substantial risk as it requires, in the aggregate, a significant expenditure and provides for slower expansion of our distribution and sales systems than may be possible by utilizing a more
traditional dealer franchise system. For example, we will not be able to utilize long established sales channels developed through a franchise system to increase our sales volume, which may harm our business, prospects, financials condition and
operating results. Moreover, we will be competing with companies with well established distribution channels.
17
Table of Contents
As of December 31, 2009, we had opened 10 Tesla owned stores in the United States and
Europe, 8 of which have been open for less than one year. We have only limited experience distributing and selling our performance vehicles through our Tesla stores. As of December 31, 2009 we had only sold 937 Tesla Roadsters to customers,
primarily in the United States and Europe. Our success will depend in large part on our ability to effectively develop our own sales channels and marketing strategies. Implementing our business model is subject to numerous significant challenges,
including obtaining permits and approvals from local and state authorities, and we may not be successful in addressing these challenges.
You must consider our business and prospects in light of the risks, uncertainties and difficulties we encounter as we implement our business model. For instance, we will need to persuade customers,
suppliers and regulators of the validity and sustainability of our business model. We cannot be certain that we will be able to do so, or to successfully address the risks, uncertainties and difficulties that our business strategy faces. Any failure
to successfully address any of the risks, uncertainties and difficulties related to our business model would have a material adverse effect on our business and prospects.
We may face regulatory limitations on our ability to sell vehicles directly or over the internet which could materially and adversely affect our ability to sell our electric vehicles.
We sell our vehicles from our Tesla stores as well as over the internet. We may not be able to sell our vehicles
through this sales model in each state in the United States as many states have laws that may be interpreted to prohibit internet sales by manufacturers to residents of the state or to impose other limitations on this sales model, including laws
that prohibit manufacturers from selling vehicles directly to consumers without the use of an independent dealership or without a physical presence in the state. For example, the state of Texas prohibits a manufacturer from being licensed as a
dealer or to act in the capacity of a dealer, which would prohibit us from operating a store in the state of Texas and may restrict our ability to sell vehicles to Texas residents over the internet from out of state altogether without altering our
sales model. The state of Kansas provides that a manufacturer cannot deliver a vehicle to a Kansas resident except through a dealer licensed to do business in the state of Kansas, which may be interpreted to require us to open a store in the state
of Kansas in order to sell vehicles to Kansas residents. In some states where we have opened a gallery, which is a location where potential customers can view our vehicles but is not a full retail location, it is possible that a state
regulator could take the position that activities at our gallery constitute an unlicensed motor vehicle dealership and thereby violates applicable manufacturer-dealer laws. For example, the state of Colorado required us to obtain dealer and
manufacturer licenses in the state in order to operate our gallery in Colorado. In addition, some states have requirements that service facilities be available with respect to vehicles sold in the state, which may be interpreted to also require that
service facilities be available with respect to vehicles sold over the internet to residents of the state thereby limiting our ability to sell vehicles in states where we do not maintain service facilities.
The foregoing examples of state laws governing the sale of motor vehicles are just some of the regulations we will face as we sell our
vehicles. In many states, the application of state motor vehicle laws to our specific sales model is largely untested under state motor vehicle industry laws, particularly with respect to sales over the internet, and would be determined by a fact
specific analysis of numerous factors, including whether we have a physical presence or employees in the applicable state, whether we advertise or conduct other activities in the applicable state, how the sale transaction is structured, the volume
of sales into the state, and whether the state in question prohibits manufacturers from acting as dealers. As a result of the fact specific and untested nature of these issues, and the fact that applying these laws intended for the traditional
automobile distribution model to our sales model allows for some interpretation and discretion by the regulators, the manner in which the applicable authorities will apply their state laws to our distribution model is unknown. Such laws, as well as
other laws governing the motor vehicle industry, may subject us to potential inquiries and investigations from state motor vehicle regulators who may question whether our sales model complies with applicable state motor vehicle industry laws and who
may require us to change our sales model or may prohibit our ability to sell our vehicles to residents in such states.
18
Table of Contents
To date, we are registered as both a motor vehicle manufacturer and dealer in California,
Colorado, Florida, Illinois and Washington and we are licensed as a motor vehicle dealer in the state of New York. We have not yet sought formal clarification of our ability to sell our vehicles in any other states.
Furthermore, while we have performed an analysis of the principal laws in the European Union relating to our distribution model and believe
we comply with such laws, we have not performed a complete analysis in all foreign jurisdictions in which we may sell vehicles. Accordingly, there may be laws in jurisdictions we have not yet entered or laws we are unaware of in jurisdictions we
have entered that may restrict our vehicle reservation practices or other business practices. Even for those jurisdictions we have analyzed, the laws in this area can be complex, difficult to interpret and may change over time.
We are almost entirely dependent upon revenue generated from the sale of our electric vehicles, specifically the Tesla Roadster, in
the near term, and our future success will be dependent upon our ability to design and achieve market acceptance of new vehicle models, and specifically the Model S.
We currently generate substantially all of our revenue from the sale of our Tesla Roadsters and the sale of the related zero emission vehicle
credits. We began production of our Tesla Roadster only in 2008, and our second planned vehicle, our Model S, is not expected to be in production until 2012, requires significant investment prior to commercial introduction, and may never be
successfully developed or commercially successful. There can be no assurance that we will be able to design future models of performance electric vehicles that will meet the expectations of our customers or that our future models, including the