UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
________________
FORM 10-K
[x] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended January 25, 2004
OR
[_] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Commission file number: 0-23985
NVIDIA CORPORATION
(Exact name of registrant as specified in its charter)
Delaware
94-3177549
(State or Other Jurisdiction of
(I.R.S. Employer
Incorporation or Organization)
Identification No.)
2701 San Tomas Expressway
Santa Clara, California 95050
(408) 486-2000
(Address, including zip code, and telephone number, including area code, of principal executive offices)
Securities registered pursuant to Section 12(b) of the Act:
None
Securities registered pursuant to Section 12(g) of the Act:
Common stock, $.001 par value per share
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, and (2) has been subject to such filing requirements for the past 90 days. Yesx No
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein and will not be contained, to the best of Registrant s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.x
Indicate by check mark whether the registrant is an accelerated filer (as defined in the Exchange Rule 12b-2) Yesx No
The aggregate market value of the voting stock held by non-affiliates of the registrant as of July 25, 2003 was approximately $2,476,223,470. Shares of common stock held by each current executive officer and director and by each person who is known by the registrant to own 5% or more of the outstanding common stock have been excluded from this computation in that such persons may be deemed to be affiliates of the registrant. Share ownership information of certain persons known by the registrant to own greater than 5% of the outstanding common stock for purposes of the preceding calculation is based solely on information on Schedule 13G filed with the Commission and is as of July 25, 2003. This determination of affiliate status is not a conclusive determination for other purposes.
The number of shares of common stock outstanding as of March 5, 2004 was 165,452,881.
DOCUMENTS INCORPORATED BY REFERENCE
The Registrant has incorporated by reference portions of its Proxy Statement for its 2004 Annual Meeting of Stockholders to be filed by May 24, 2004.
NVIDIA CORPORATION
TABLE OF CONTENTS
Page
PART I
Item 1.
Business
Item 2.
Properties
Item 3.
Legal Proceedings
Item 4.
Submission of Matters to a Vote of Security Holders
PART II
Item 5.
Market for Registrant s Common Equity and Related Stockholder Matters
10
Item 6.
Selected Financial Data
10
Item 7.
Management s Discussion and Analysis of Financial Condition and Results of Operations
12
Item 7a.
Quantitative and Qualitative Disclosures about Market Risk
23
Item 8.
Consolidated Financial Statements and Supplementary Data
35
Item 9.
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
35
Item 9a.
Controls and Procedures
35
PART III
Item 10.
Directors and Executive Officers of the Registrant
36
Item 11.
Executive Compensation
36
Item 12.
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
36
Item 13.
Certain Relationships and Related Transactions
36
Item 14.
Principal Accountant Fees and Services
36
PART IV
Item 15.
Exhibits, Financial Statement Schedules and Reports on Form 8-K
37
Signatures
69
FORWARD-LOOKING STATEMENTS
This report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, which are subject to the "safe harbor" created by those sections. These forward-looking statements include but are not limited to: statements related to industry trends and future growth in the markets for digital media processors; our product development efforts; the timing of our introduction of new products; industry and consumer acceptance of our products; and future profitability. Discussions containing these forward-looking statements may be found in "Business" and "Management s Discussion and Analysis of Financial Condition and Results of Operations." These forward-looking statements involve risks and uncertainties that could cause our actual results to differ materially from those in the forward-looking statements. We undertake no obligation to publicly release any revisions to the forward-looking statements or reflect events or circumstances after the date of this document. The "Business Risks" section, among other things, should be considered in evaluating our prospects and future financial performance.
PART I
ITEM 1. BUSINESS
Overview
NVIDIA Corporation is a market leader in digital media processor technology, dedicated to creating products that enhance the interactive experience on consumer and professional computing platforms. We design, develop and market graphics processing units, or GPUs, media and communications processors, or MCPs, ultra-low power media processors, or UMPs, and related software that are integral to a wide variety of visual computing platforms, including enterprise personal computers, or PCs, consumer PCs, professional workstations, notebook PCs, personal digital assistants, cellular phones, game consoles and digital media centers. We were incorporated in California in April 1993 and reincorporated in Delaware in April 1998. Our mission is to be the most important visual computing company in the world.
Original equipment manufacturers, or OEMs, original design manufacturers, or ODMs, add-in-card manufacturers, system builders and consumer electronics companies worldwide utilize NVIDIA digital media processors as a core component of their entertainment and business solutions. Our award-winning GPUs deliver superior performance and crisp visual quality for PC-based applications such as manufacturing, science, e-business, entertainment and education. Our MCPs perform highly demanding multimedia processing for broadband connectivity, communications and breakthrough audio capabilities. Our UMPs deliver a great visual experience by accelerating graphics and video applications while implementing design techniques that result in high performance and ultra-low power consumption.
Industry Environment and Our Business
Programmable DirectX 9 GPUs
The combination of the programmable GPU with Microsoft Corporation s, or Microsoft s, DirectX 9 high-level shading language are known as DirectX 9 GPUs. The flexibility and power of DirectX 9 GPUs can enhance high-definition digital video, image processing and editing for digital photographs, as well as bring a "cinematic look" to computer graphics. Technology and market leadership in this generation of GPUs is a key element of our corporate strategy. In fiscal 2004, we offered a top-to-bottom family of DirectX 9 GPUs for desktop and notebook PCs. As consumer awareness and demand grew throughout the year, DirectX 9 GPUs gained market share. We are the segment share leader for desktop standalone DirectX 9 GPUs according to Mercury Research, reflecting the success of our strategy and the depth and strength of our GeForce FX family of programmable GPU products.
Media Center PCs
Media Center PCs, the latest of which are currently powered by Microsoft Windows XP Media Center Edition 2004, are complete Windows XP PCs enhanced for home entertainment. These computers represent the latest stage in the evolution of home PCs into digital media hubs that bring together entertainment choices and allow access via a remote control. Media Center PCs represent one of the most exciting growth opportunities in the PC and consumer electronics market. Driven by the proliferation of digital content, home networking, and digital displays, there is excitement around this platform, which is capable of recording, storing, sharing, and processing our growing libraries of digital content. Over a million Media Center PCs were sold during calendar 2003. The combination of our DirectX 9 GPU with high-definition digital video technology, digital media software, and our close working relationship with Microsoft helped us become the technology partner of choice for 46 of the 50 Media Center PCs that shipped worldwide during our fiscal 2004. We believe Media Center PCs have a legitimate opportunity to be the center of home entertainment in the future and represent one of the most exciting ways to participate in the digital media era. We are engaged with customers around the world in Media Center PC designs of all price points and form factors.
MCPs
NVIDIA s nForce family of products represents our MCPs for Advanced Micro Devices, Inc., or AMD,-based desktop, notebook and workstation PCs. Our nForce2 platform processor was recognized by Tom s Hardware Guide as the "Chipset of the Year." The nForce2 propelled us to the leading position in the AMD Athlon XP microprocessor segment. In September, 2003, we announced our newest platform processor, the nForce3. The nForce3 was developed specifically for AMD s 64-bit microprocessor architecture and is positioned for AMD s new Athlon64 product family. In the short time NVIDIA has been in the platform processor business, we have shipped over 10 million units to date. Our strategy remains to aggressively innovate, bringing new levels of performance in system bandwidth, networking and communications, while addressing critical needs such as network security.
UMPs
Our successful acquisition and integration of MediaQ in August 2003 has added significant momentum to our handheld product development efforts. We are entering the era of multimedia and feature-rich handsets. Over the next several years, digital media processing technologies will play a key role for the handheld industry. With innovative technologies, such as ultra-low power digital media processors, future cell phones will be able to receive television programs, record digital video like a camcorder, enable video phone calls and be a portable game player. We see an exciting opportunity to leverage NVIDIA s resources and expertise in digital media processing to offer products for the multimedia handset era. The handheld business is building momentum with respect to megapixel camera phones and new video telephony designs.
Our Products
We have three major product groups: GPUs, MCPs and UMPs. In addition, we sell a two-chip platform processor for use in Microsoft s Xbox video game console. Our product portfolio is designed to provide advanced processing and rendering power at competitive prices and to deliver the maximum performance from industry standards such as Microsoft s DirectX Application Programming Interface, or API, and Silicon Graphics, Inc. s, or SGI s, OpenGL API on Windows operating systems and Linux platforms.
GPUs. Our GPU products support desktop PCs, notebook PCs and professional workstations. We have three major families of GPUs: GeForce, Go and Quadro.
GeForce. The GeForce family represents our desktop GPUs and includes the GeForce FX, GeForce4 and GeForce2. Our most advanced GPU family is the GeForce FX series. Introduced in November 2002, the GeForce FX architecture is our first fully programmable cinematic GPU and is also our first to be manufactured using 0.13-micron process technology. Our GeForce FX 5950 GPU is one of the semiconductor industry s most complex application specific integrated circuits, or ASICs. The GeForce FX 5950 GPU contains over 135 million transistors and reaches processor clock speeds up to 500 megahertz, or MHz, and memory clock speeds up to 1 gigahertz, or GHz. The GeForce FX family is designed for the enthusiast, performance and mainstream consumer segments. The GeForce2 and GeForce4 are designed to deliver a balance of performance and features for the value and low-cost PC segments.
Go. The GeForce Go and Quadro Go families represent our notebook GPUs and include the GeForce FX Go, GeForce4 Go, GeForce2 Go, QuadroFX Go, Quadro4 Go and Quadro2 Go GPUs. These GPUs are designed to deliver desktop graphics performance and features for multiple notebook configurations from desktop replacements, performance notebooks and thin-and-lights to mobile workstations. The GeForce Go products are designed to serve the needs of both corporate and consumer users. The Quadro Go products are designed to serve the needs of workstation professionals in the area of product design and digital content creation.
Quadro. NVIDIA s Quadro branded products are robust, high-performance workstation solutions for the professional user that are available for the high-end, mid-range, entry-level and multi-display product lines. The NVIDIA Quadro family, which consists of the Quadro FX, Quadro4 and the Quadro NVS workstation solutions are designed to meet the needs of a number of workstation applications such as industrial product design, digital content creation, non-linear video editing, scientific and financial visualization, general purpose business and financial trading. NVIDIA Quadro products are fully certified by several software developers for all professional workstation applications, and are designed to deliver the graphics performance and precision required by professional applications.
MCPs. Our MCP product family, known as nForce, supports desktop PCs, notebook PCs and professional workstations.
nForce. The nForce family represents our MCPs for AMD-based desktop, notebook and workstation PCs and includes the nForce2 and nForce3. We define a MCP as a single-chip or chipset that can off-load system functions, such as audio processing and network communications, and perform these operations independently from the host central processing unit, or CPU. The nForce2 integrates a comprehensive set of multimedia capabilities, such as two-dimensional, or 2D, three-dimensional, or 3D, digital video disc, or DVD, high-definition television, or HDTV, Dolby Digital audio playback and fast broadband and networking communications. nForce2 is a two-chip solution, which includes either a System Platform Processor, or SPP, or an Integrated Graphics Processor, or IGP, combined with a MCP. The nForce2 family is designed to be compatible with AMD s AthlonXP and Duron microprocessors. The nForce2 configuration is determined by the OEM or system builder. The nForce3 family is a single-chip MCP, designed to be compatible with AMD Athlon64, Athlon 64 FX and Opteron 64-bit CPUs. nForce3 products which consist of the nForce3, nForce3 Professional and nForce3 Go, are designed to complement the latest 64-bit CPUs while delivering innovative technologies for networking, storage and system performance.
UMPs. Our UMP product family, known as GoForce, supports handheld personal digital assistants, or PDAs, and cellular phones.
GoForce. The GoForce family represents our UMPs for a wide range of cellular and handheld devices. The GoForce 2100 is one of the first UMPs to offer hardware acceleration engines for 2D graphics to manufacturers that support liquid crystal display, or LCD, screen resolutions up to 320 x 240 pixels. The GoForce 2150 offers a host of advanced features for cellular phones and PDAs, including support for 1.3-megapixel image capture, accelerated graphics for gaming, and motion Joint Photographic Experts Group, or JPEG, capture and playback. Using dedicated hardware accelerator engines, the GoForce 2150 delivers high performance multimedia applications and drives high-resolution displays, while extending handheld battery life through a variety of unique power management techniques.
Xbox. Our Xbox platform processor supports Microsoft s Xbox video game system. The Xbox platform processor features dual-processing architecture, which includes NVIDIA s GPU designed specifically for the Xbox, or XGPU, and a MCP to power the Xbox s standout graphics, audio and networking capabilities. The XGPU is a programmable 3D processor that contains more that 60 million transistors. The amount of computing horsepower is dedicated to one goal to create stunning, never-before-seen imagery. The MCP is based on two powerful digital signal processors with 4 billion operations per second dedicated to 3D audio and network processing. The MCP performs the processing for the broadband networking functions and high-speed peripherals.
Our Strategy
We design our GPUs, MCPs and UMPs to enable OEMs, original design manufacturers, or ODMs, system builders, motherboard and add-in board manufacturers to build award-winning products by delivering state-of-the-art interactive 3D graphics, audio, networking and communications capability, while maintaining affordable prices. We believe that by developing 3D graphics and media communications solutions that provide superior performance and address the key requirements of the PC and handheld segments, we will accelerate the adoption of high-definition digital media platforms and devices throughout these segments. We combine scalable architectural technology with mass market economies-of-scale to deliver a complete family of products that spans workstations to low-cost value PCs to mulitmedia-rich mobile phones.
Our objective is to be the leading supplier of performance GPUs, MCPs and UMPs for a broad range of desktop PCs, workstations, notebooks, video game consoles, Internet appliances, handhelds and any future computing device with a display. Our current focus is on the desktop PC, workstation, notebook PC, mulitmedia-rich mobile phones and game console product lines, and we plan to expand into other product lines. Our strategy to achieve this objective includes the following key elements:
Build Award-Winning, Architecturally-Compatible 3D Graphics, Media Communications and Ultra-Low Power Product Families for the PC, Handheld and Digital Entertainment Platforms. Our strategy is to achieve market share leadership in these platforms by providing award-winning performance at every price point. By developing 3D graphics and media communications solutions that provide superior performance and address the key requirements of these platforms, we believe that we will accelerate the adoption of 3D graphics and rich digital media. As part of our strategy, we have closely aligned our product development with Direct3D and OpenGL, which we believe maximizes third-party software support. Direct3D and OpenGL are application programming interfaces, or APIs, that enable software developers to write their applications to a standard without specific knowledge of hardware implementations.
Target Leading OEMs, ODMs and System Builders. Our strategy is to enable our leading OEM, ODMs and major system builder customers to differentiate their products in a highly competitive marketplace by using our digital media processors. We believe that design wins with these industry leaders provide market validation of our products, increase brand awareness and enhance our ability to penetrate additional leading customer accounts. In addition, we believe that close relationships with OEMs and ODMs will allow us to better anticipate and address customer needs with future generations of our products. For example, our GPUs are currently designed into products offered by virtually every leading branded PC OEM, including Acer, Inc., or Acer, Apple Computer, Inc., or Apple, Dell Computer Corporation, or Dell, eMachines, Inc., or eMachines, Fujitsu-Siemens Computers, or Fujitsu-Siemens, Gateway, Inc., or Gateway, Hewlett Packard Company, or HP, International Business Machines, Inc., or IBM, Micron Electronics, Inc. , or Micron, NEC Corporation, or NEC, SGI, and Sony Corporation, or Sony.
Sustain Technology and Roadmap Leadership in 3D Graphics and Video, and Media Communications and Ultra-Low Power. We are focused on leveraging our advanced engineering capabilities to accelerate the quality and performance of 3D graphics and video, media communications and ultra-low power processing in PCs and handheld devices. A fundamental aspect of our strategy is to actively recruit the best 3D graphics and video, networking and communications engineers in the industry, and we believe that we have assembled an exceptionally experienced and talented engineering team. Our research and development strategy is to focus on concurrently developing multiple generations of GPUs, MCPs and UMPs using independent design teams. As we have in the past, we intend to leverage this strategy to achieve new levels of graphics, networking and communications features and performance and ultra-low power designs, enabling our customers to achieve award-winning performance in their products.
Increase Market Share. We believe that substantial market share will be important to achieving success. We intend to achieve a leading share of the market by devoting substantial resources to building award-winning families of products for a wide range of applications.
Leverage Our Expertise in Digital Multimedia. We believe the synergy created by the combination of 3D graphics and video and the Internet will fundamentally change the way people work, learn, communicate and play. We believe that our expertise in high-definition graphics and system architecture positions us to help drive this transformation. We are leveraging our expertise in the processing and transmission of high-bandwidth digital media to develop products designed to address the requirements of high-bandwidth concurrent multimedia.
Sales and Marketing
Our worldwide sales and marketing strategy is a key part of our objective to become the leading supplier of performance GPUs, MCPs and UMPs for PCs and handheld devices. Our sales and marketing teams work closely with OEMs, ODMs, system integrators, motherboard manufacturers, add-in board manufacturers and industry trendsetters, collectively our Channel, to define product features, performance, price and timing of new products. Members of our sales team have a high level of technical expertise and product and industry knowledge to support a competitive and complex design win process. We also employ a highly skilled team of application engineers to assist the Channel in designing, testing and qualifying system designs that incorporate our products. We believe that the depth and quality of our design support are key to improving the Channel s time-to-market, maintaining a high level of customer satisfaction within the Channel and fostering relationships that encourage customers to use the next generation of our products.
In the segments we serve, the sales process involves achieving key design wins with leading OEMs and major system integrators and supporting the product design into high volume production with key ODMs, motherboard manufacturers and add-in board manufacturers. These design wins in turn influence the retail and system integrator channel that is serviced by add-in board and motherboard manufacturers. Our distribution strategy is to work with a number of leading independent contract equipment manufacturers, or CEMs, ODMs, motherboard manufacturers, add-in board manufacturers and stocking representatives, each of which has relationships with a broad range of major OEMs and/or strong brand name recognition in the retail channel. Currently, we sell a significant majority of our digital media processors directly to stocking representatives, CEMs, ODMs, motherboard manufacturers and add-in board manufacturers, which then sell boards and systems with our products to leading OEMs, retail outlets and to a large number of system integrators. Although a small number of our customers represent the majority of our revenue, their end customers include a large number of OEMs and system integrators throughout the world.
Our GPUs are currently designed into products offered by virtually every leading branded PC OEM, including Acer, Apple, Dell, eMachines, Fujitsu-Siemens, Gateway, HP, IBM, Micron, NEC, SGI and Sony, as well as leading CEMs, including Celestica Hong Kong Ltd., Mitac International Corporation, Micro-Star International Co. Ltd., or Micro-Star, and Sanmina SCI Corporation, and leading motherboard and add-in board manufacturers, including Abit Computer Corporation, ASUSTeK Computer Inc., Canopus Corporation, Gainward Co. Ltd., Gigabyte Technology Co. Ltd., Guillemot Corporation, LeadTek Research, Inc. and PNY Technologies.
As a result of our Channel strategy, our sales are focused on a small number of customers. Sales to Edom Technology Co., Ltd., or Edom, accounted for 21%, sales to Microsoft accounted for 15%, sales to Atlantic Semiconductor, or Atlantic, accounted for 12% and sales to Micro-Star accounted for 12% of our total revenue for fiscal 2004. Edom and Atlantic are independent stocking representatives. Micro-Star is a CEM, and each of these companies purchases our products and resells these products to OEMs and system integrators.
To encourage software title developers and publishers to develop games optimized for platforms utilizing our products, we seek to establish and maintain strong relationships in the software development community. Engineering and marketing personnel interact with and visit key software developers to promote and discuss our products, as well as to ascertain product requirements and solve technical problems. Our developer program makes products available to developers prior to volume availability to encourage the development of software titles that are optimized for our products.
Backlog
We do not believe that a backlog as of any particular date is indicative of future results. Our sales are primarily made pursuant to standard purchase orders. The quantity of products purchased by our customers as well as shipment schedules are subject to revisions that reflect changes in both the customers requirements and in manufacturing availability. The semiconductor industry is characterized by short lead time orders and quick delivery schedules. In light of industry practice and experience, we believe that only a small portion of our backlog is non-cancelable and that the dollar amount associated with the non-cancelable portion is not significant.
Seasonality
Our industry is largely focused on the consumer products market. Due to the seasonality in this market, we typically expect to see stronger revenue growth in the second half of the calendar year related to the back-to-school and holiday seasons.
Manufacturing
We do not directly manufacture semiconductor wafers used for our products. Instead we utilize what is known as a "fabless" manufacturing strategy whereby we employ world-class suppliers for all phases of the manufacturing process, including wafer fabrication, assembly, testing and packaging. This strategy leverages the expertise of industry-leading suppliers that are certified by the International Organization for Standardization, or ISO, in such areas as fabrication, assembly, quality control and assurance, reliability and testing. In addition, this strategy allows us to avoid many of the significant costs and risks associated with owning and operating manufacturing operations. Our suppliers are also responsible for procurement of most of the raw materials used in the production of our products. As a result, we can focus our resources on product design, additional quality assurance, marketing and customer support.
We utilize Taiwan Semiconductor Manufacturing Corporation, or TSMC, IBM and United Microelectronics Corporation, or UMC, to produce our semiconductor wafers. We then utilize independent subcontractors to perform assembly, testing and packaging of our products. Historically, our GPUs and MCPs were primarily fabricated by TSMC. However, on March 26, 2003, we announced that we had formed a multi-year strategic alliance under which IBM will manufacture some of our GPUs. In July 2003, we began production of the GeForce FX 5700 GPU at IBM s plant in New York. In August 2003, we completed the acquisition of MediaQ, Inc., a leading provider of graphics and multimedia technology for handheld devices. MediaQ s products, now branded as our GoForce products, are manufactured at UMC.
Our GPUs, MCPs and UMPs are assembled, tested and packaged by Advanced Semiconductor Engineering, Amkor Technology, ChipPAC Incorporated and Siliconware Precision Industries Company Ltd. We receive semiconductor products from our subcontractors, perform incoming quality assurance and then ship them to CEMs, stocking representatives, motherboard and add-in board manufacturer customers from our Santa Clara, California warehouse and third-party warehouses in Singapore and Hong Kong. Generally, these manufacturers assemble and test the boards based on our design kit and test specifications, then ship the products to retailers, system integrators or OEMs as motherboard and add-in board solutions. Our hardware and software development teams work closely with certification agencies, Microsoft Windows Hardware Quality Labs and our OEM customers to ensure that both our boards and software drivers are certified for inclusion in the OEMs products.
Inventory and Working Capital
Our management focuses considerable attention on managing our inventories and other working-capital-related items. We manage inventories by communicating with our customers and then using our industry experience to forecast demand on a product-by-product basis. We then place manufacturing orders for our products that are based on this forecasted demand. The quantity of products actually purchased by our customers as well as shipment schedules are subject to revisions that reflect changes in both the customers requirements and in manufacturing availability. We maintain substantial inventories of our products because t he semiconductor industry is characterized by short lead time orders and quick delivery schedules.
Research and Development
We believe that the continued introduction of new and enhanced products designed to deliver leading 3D graphics, high definition video, audio, ultra-low power communications and networking performance and features is essential to our future success. Our research and development strategy is to focus on concurrently developing multiple generations of GPUs, MCPs and UMPs using independent design teams. Our research and development efforts are performed within specialized groups consisting of software engineering, hardware engineering, very large scale integration, or VLSI, design engineering, process engineering, architecture and algorithms. These groups act as a pipeline designed to allow the efficient simultaneous development of multiple generations of products.
A critical component of our product development effort is our partnerships with leaders in the computer aided design, or CAD, industry. We invest significant resources in the development of relationships with industry leaders, including Cadence Design Systems, Inc., IKOS Systems, Inc. and Synopsys, Inc., often assisting these companies in the product definition of their new products. We believe that forming these relationships and utilizing next-generation development tools to design, simulate and verify our products will help us remain at the forefront of the 3D graphics market and develop products that utilize leading-edge technology on a rapid basis. We believe this approach assists us in meeting the new design schedules of PC manufacturers.
We have substantially increased our engineering and technical resources and have 1,057 full-time employees engaged in research and development as of January 25, 2004, compared to 832 employees as of January 26, 2003. During fiscal years 2004, 2003 and 2002, we incurred research and development expenditures of $270.0 million, $224.9 million and $154.8 million, respectively.
Competition
The market for GPUs, MCPs and UMPs for PCs and handhelds is intensely competitive and is characterized by rapid technological change, evolving industry standards and declining average selling prices. We believe that the principal competitive factors in this market are performance, breadth of product offerings, access to customers and distribution channels, backward-forward software support, conformity to industry standard APIs, manufacturing capabilities, price of digital media processors and total system costs of add-in boards or motherboards. We expect competition to increase both from existing competitors and new market entrants with products that may be less costly than ours, or may provide better performance or additional features not provided by our products.
Our primary source of competition is from companies that provide or intend to provide GPU, MCP and UMP solutions for the PC and handheld segments. Our competitors include the following:
suppliers of MCPs that incorporate a combination of 3D graphics, networking, audio, communications and Input/Output, or I/O, functionality as part of their existing solutions, such as ATI Technologies, Inc., or ATI, Intel Corporation, or Intel, Silicon Integrated Systems, Inc., and VIA Technologies, Inc., or VIA;
suppliers of standalone desktop GPUs that incorporate 3D graphics functionality as part of their existing solutions, such as ATI, Creative Technology, Matrox Electronics Systems Ltd. and XGI Technology, Inc.,;
suppliers of standalone notebook GPUs that incorporate 3D graphics functionality as part of their existing solutions, such as ATI, Silicon Motion Corporation, and the joint venture of a division of SONICblue Incorporated (formerly S3 Incorporated) and VIA; and
suppliers of UMPs for handheld devices that incorporate advanced graphics functionality as part of their existing solutions, such as ATI and Seiko-Epson.
If and to the extent we offer products outside of the personal computer, consumer electronics and handheld segments, we may face competition from some of our existing competitors, as well as from companies with which we currently do not compete. We cannot accurately predict if we will compete successfully in any new segments we may enter.
Patents and Proprietary Rights
We rely primarily on a combination of patents, trademarks, trade secrets, employee and third-party nondisclosure agreements and licensing arrangements to protect our intellectual property in the United States and internationally. We have numerous patents issued and pending in the United States and in foreign countries. Our patents and pending patent applications relate to technology used by us in connection with our products, including our digital media processors. We also rely on international treaties and organizations and foreign laws to protect our intellectual property. We continuously assess whether and where to seek formal protection for particular innovations and technologies based on such factors as: the commercial significance of our operations and our competitors operations in particular countries and regions; the location in which our products are manufactured; our strategic technology or product directions in different countries; and the degree to which intellectual property laws exist and are meaningfully enforced in different jurisdictions.
Our pending patent applications and any future applications may not be approved. In addition, any issued patents may not provide us with competitive advantages or may be challenged by third parties. The enforcement of patents by others may harm our ability to conduct our business. Others may independently develop substantially equivalent intellectual property or otherwise gain access to our trade secrets or intellectual property. Our failure to effectively protect our intellectual property could harm our business. We have licensed technology from third parties for incorporation in our digital media processors, and expect to continue to enter into license agreements for future products. These licenses may result in royalty payments to third parties, the cross licensing of technology by us or payment of other consideration. If these arrangements are not concluded on commercially reasonable terms, our business could suffer.
Employees
As of January 25, 2004 we had 1,825 employees, 1,057 of whom were engaged in research and development and 768 of whom were engaged in sales, marketing, operations and administrative positions. None of our employees are covered by collective bargaining agreements, and we believe our relationships with our employees are good.
Financial Information by Business Segment and Geographic Data
We operate in a single industry segment: the design, development and marketing of GPUs, MCPs, UMPs and related software that are integral to a wide variety of visual computing platforms including enterprise PCs, consumer PCs, professional workstations, notebook PCs, personal digital assistants, cellular phones, game consoles and digital media centers. The information included in Note 16 of the Notes to the Consolidated Financial Statements is hereby incorporated by reference.
Management
The following sets forth certain information regarding our executive officers, their ages and their positions as of January 25, 2004:
Name
Age
Position
Jen-Hsun Huang
40
President, Chief Executive Officer and Director
Marvin D. Burkett
61
Chief Financial Officer
Jeffrey D. Fisher
45
Executive Vice President, Worldwide Sales
David M. Shannon
48
Vice President, General Counsel
Di Ma
51
Vice President, Operations
Daniel F.Vivoli
43
Executive Vice President, Marketing
Jen-Hsun Huang co-founded NVIDIA in April 1993 and has served as its President, Chief Executive Officer and a member of the Board of Directors since its inception. From 1985 to 1993, Mr. Huang was employed at LSI Logic Corporation, a computer chip manufacturer, where he held a variety of positions, most recently as Director of Coreware, the business unit responsible for LSI s "system-on-a-chip" strategy. From 1983 to 1985, Mr. Huang was a microprocessor designer for Advanced Micro Devices, a semiconductor company. Mr. Huang holds a B.S.E.E. degree from Oregon State University and an M.S.E.E. degree from Stanford University.
Marvin D. Burkett joined NVIDIA as Chief Financial Officer in September 2002. From February 2000 until joining NVIDIA, Mr. Burkett was a financial consultant and served as CFO of Arcot Systems, a security software company. From 1998 to 1999, Mr. Burkett was the executive vice president and CFO of Packard Bell NEC. Mr. Burkett also previously spent 26 years at Advanced Micro Devices, or AMD, where he held a variety of positions including CFO, senior vice president and corporate controller. Mr. Burkett holds B.S. and M.B.A. degrees from the University of Arizona.
Jeffrey D. Fisher has been NVIDIA s Executive Vice President, Worldwide Sales since July 1994. He has over 20 years of sales and marketing experience in the semiconductor industry. Mr. Fisher holds a B.S.E.E. degree from Purdue University and an M.B.A. degree from Santa Clara University.
David M. Shannon joined NVIDIA in August 2002 as Vice President and General Counsel. From 1993 to 2002, Mr. Shannon held various counsel positions at Intel Corporation, including the most recent position of Vice President and Assistant General Counsel. Mr. Shannon also practiced for eight years in the law firm of Gibson Dunn and Crutcher, focusing on complex commercial and high-technology related litigation. Mr. Shannon holds B.A. and J.D. degrees from Pepperdine University.
Di Ma has been Vice President of Operations since July 2000. From 1990 to 2000, Dr. Ma was with Standard Microsystems, most recently serving as the Senior Vice President of Operations. Previously, Dr. Ma held management positions in engineering at Motorola and was an adjunct professor at State University of New York. Dr. Ma holds a B.S. in Physics from the National Taiwan University and an M.S. degree and a Ph.D. in Electrical Engineering from the State University of New York.
Daniel F. Vivoli has been Vice President of Marketing since December 1997. From 1988 to December 1997, Mr. Vivoli held management positions, most recently as Vice President of Product Marketing, at Silicon Graphics, Inc., a computing technology company. From 1983 to 1988, Mr. Vivoli held various marketing positions at Hewlett-Packard Company. Mr. Vivoli holds a B.S.E.E. degree from the University of Illinois at Champaign-Urbana.
Available Information
Our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and, if applicable, amendments to those reports filed or furnished pursuant to Section 13(a) of the Exchange Act are available free of charge on or through our Internet website, http://www.nvidia.com, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission.
ITEM 2. PROPERTIES
Our headquarters complex is located on a leased site in Santa Clara, California and is comprised of five buildings. Additionally, we lease three other buildings in Santa Clara with one used as warehouse space and the other two used as lab space. Outside of Santa Clara, we lease space in Berkeley, California; Austin, Texas; Beaverton, Oregon; Bedford, Massachusetts; Bellevue, Washington; Chandler, Arizona; Durham, North Carolina; Greenville, South Carolina; and Fort Collins, Colorado. These facilities are used as design centers and/or sales and administrative offices.
Outside of the United States, we lease space in Singapore; Taipei, Taiwan; Hsinchu, Taiwan; Yokohama, Japan; Seoul, Korea; Paris, France; Wurselen, Germany; Munich, Germany; and Theale, England. These facilities are used primarily to support our customers and operations and as sales and administrative offices.
We believe that we currently have sufficient facilities to conduct our operations for the next twelve months, although we expect to lease additional facilities throughout the world as our business requires. For additional information regarding obligations under leases, see Note 13 to the Consolidated Financial Statements under the subheading "Lease Obligations," which information is hereby incorporated by reference.
ITEM 3. LEGAL PROCEEDINGS
On December 15, 2000, NVIDIA Corporation and one of our indirect subsidiaries entered into an agreement to purchase certain graphics chip assets from 3dfx Interactive, Inc., or 3dfx. The asset purchase closed on April 18, 2001. In May 2002, we were served with a complaint filed by the landlord of 3dfx s San Jose, California commercial real estate lease. In October 2002, 3dfx filed for Chapter 11 bankruptcy protection in the United States Bankruptcy Court for the Northern District of California. In December 2002, we were served with a complaint filed by the landlord of 3dfx s Austin, Texas commercial real estate lease. The landlords complaints both assert claims for, among other things, interference with contract, successor liability and fraudulent transfer. The landlords are seeking to recover, among other things, amounts owed on their leases in the aggregate amount of approximately $10 million. In March 2003, we were served with a complaint filed by the Trustee appointed by the Bankruptcy Court to represent the interests of the 3dfx bankruptcy estate. The Trustee s complaint asserts claims for, among other things, successor liability and fraudulent transfer. The Trustee s complaint seeks additional payments from us, the amount of which has not been quantified. The landlords actions have been removed to the Bankruptcy Court from the Superior Court of California and consolidated with the Trustee s action for purposes of discovery. Discovery is currently proceeding and no trial date has been set. We believe the claims asserted against us are without merit and we will continue to defend ourselves vigorously.
We are subject to other legal proceedings, but we do not believe that the ultimate outcome of any of these proceedings will have a material adverse effect on our financial position or overall trends in results of operations. However, if an unfavorable ruling were to occur in any specific period, there exists the possibility of a material adverse impact on the results of operations of that period.
ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
Not applicable.
PART II
ITEM 5. MARKET FOR REGISTRANT S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS
Our common stock is traded on the Nasdaq National Market under the symbol NVDA. Public trading of our common stock began on January 22, 1999. Prior to that, there was no public market for our common stock. As of March 5, 2004, we had approximately 436 stockholders of record, not including those shares held in street or nominee name.
The following table sets forth for the periods indicated the high and low sales price for our common stock as quoted on the Nasdaq National Market:
High
Low
Year ended January 30, 2005
First Quarter (through March 5, 2004)
24.33
21.15
Year ended January 25, 2004
Fourth Quarter
25.88
17.08
Third Quarter
21.47
15.26
Second Quarter
27.75
13.55
First Quarter
14.83
9.33
Year ended January 26, 2003
Fourth Quarter
18.27
9.99
Third Quarter
16.98
7.20
Second Quarter
40.65
14.30
First Quarter
68.35
30.37
Dividend Policy
We have never paid any cash dividends on our common stock and do not expect to pay cash dividends for the foreseeable future.
Equity Compensation Plan Information
Information regarding our equity compensation plans, including both stockholder approved plans and non-stockholder approved plans, will be contained in our definitive Proxy Statement with respect to our Annual Meeting of Stockholders under the caption "Compensation-Equity Compensation Plan Information," and is incorporated by reference into this report.
ITEM 6. SELECTED FINANCIAL DATA
The following selected financial data should be read in conjunction with our financial statements and the notes thereto, and with Item 7, "Management s Discussion and Analysis of Financial Condition and Results of Operations." The consolidated statement of income data for the years ended January 25, 2004, January 26, 2003 and January 27, 2002 and the consolidated balance sheet data as of January 25, 2004 and January 26, 2003 have been derived from and should be read in conjunction with our audited consolidated financial statements and the notes thereto included herein. The consolidated statement of income data for the years ended January 28, 2001 and January 30, 2000 is derived from audited consolidated financial statements and the notes thereto which are not included in this Annual Report on Form 10-K. The consolidated balance sheet data as of January 27, 2002, January 28, 2001 and January 30, 2000 is derived from audited consolidated financial statements and the notes thereto which are not included in this Annual Report on Form 10-K.
10
Year Ended
January 25,
January 26,
January 27,
January 28,
January 30,
2004 (A, B)
2003 (C, D)
2002 (E, F)
2001
2000
(in thousands, except per share data)
Consolidated Statement of Income Data:
Revenue
1,822,945
1,909,447
1,369,471
735,264
374,505
Gross profit
528,878
576,012
519,238
272,879
141,843
Income from operations
90,157
143,986
241,732
128,135
58,617
Income before income tax expense
86,673
150,557
252,749
144,808
60,371
Income tax expense
12,254
59,758
75,825
46,339
19,412
Net income
74,419
90,799
176,924
98,469
40,959
Basic net income per share
0.46
0.59
1.24
0.75
0.34
Diluted net income per share
0.43
0.54
1.03
0.62
0.28
Shares used in basic per share computation
160,924
153,513
143,015
130,998
119,488
Shares used in diluted per share computation
172,707
168,393
171,074
159,294
144,392
January 25,
January 26,
January 27,
January 28,
January 30,
2004
2003
2002
2001
2000
(in thousands)
Consolidated Balance Sheet Data:
Cash, cash equivalents and marketable securities
604,043
1,028,413
791,377
674,275
61,560
Total assets
1,399,344
1,617,015
1,503,174
1,016,902
203,085
Capital lease obligations, less current portion
856
4,880
5,861
378
962
Deferred revenue
--
--
70,193
200,000
--
Deferred income tax liability
8,609
--
--
--
--
Long-term debt
--
300,000
300,000
300,000
500
Long-term liabilities
4,582
--
--
--
--
Total stockholders equity
1,051,185
932,687
763,819
407,107
127,424
Cash dividends declared per common share
--
--
--
--
--
___________________________________________________________________________________________
(A) Fiscal 2004 included a charge of $3,500 related to the write-off of acquired research and development expense from the purchase of MediaQ, Inc. that had not yet reached technological feasibility and has no alternative future use.
(B) Fiscal 2004 included a charge of $13,068 in connection with our convertible subordinated debenture redemption.
(C) Fiscal 2003 included $40,365 in additional revenue related to our settlement of our arbitration with Microsoft regarding Xbox pricing.
(D) Fiscal 2003 included a charge for stock option exchange expenses of $61,832 related to personnel associated with cost of revenue (for manufacturing personnel), research and development, and sales, general and administrative of $6,164, $35,417 and $20,251, respectively.
(E) Fiscal 2002 included $10,030 of acquisition charges attributable to expenses related to our acquisition of assets from 3dfx.
(F) Fiscal 2002 included a charge of $3,687 related to our relocation from our previous headquarters.
11
ITEM 7. MANAGEMENT S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following discussion and analysis should be read in conjunction with our consolidated financial statements and notes thereto included elsewhere in this Annual Report.
Overview
Our Company
NVIDIA Corporation is a market leader in digital media processor technology, dedicated to creating products that enhance the interactive experience on consumer and professional computing platforms. We design, develop and market graphics processing units, or GPUs, media and communications processors, or MCPs, ultra-low power media processors, or UMPs, and related software. Our products are integral to a wide variety of visual computing platforms, including enterprise personal computers, or PCs, consumer PCs, professional workstations, notebook PCs, personal digital assistants, cellular phones, game consoles and digital media centers. We were incorporated in California in April 1993 and reincorporated in Delaware in April 1998. Our mission is to be the most important visual computing company in the world.
Recent Developments
Convertible Subordinated Debenture Redemption
On October 24, 2003, we redeemed our 4 % convertible subordinated debentures, or the Notes, due 2007. The aggregate principal amount of the Notes outstanding was $300.0 million, which included $18.6 million of notes that we repurchased during the three months ended October 26, 2003. The redemption price was equal to approximately 102.7% of the outstanding principal amount of the Notes, plus accrued and unpaid interest up to, but excluding, the redemption date. In connection with the redemption of the Notes, we recorded a one-time charge of approximately $13.1 million, which included a $7.6 million redemption premium and $5.5 million of unamortized issuance costs.
SEC Investigation
On September 11, 2003, we announced that the Securities and Exchange Commission, or SEC, had concluded its investigation of us and that we have reached a final agreement with the SEC resolving an investigation undertaken by the SEC s staff. Under the terms of the agreement, NVIDIA, without admitting or denying liability or wrongdoing, agreed to an administrative cease and desist order prohibiting any future violations of certain non-fraud financial reporting, books and records, and internal control provisions. There is no requirement to pay any fines or penalties.
Acquisition of MediaQ, Inc.
On August 19, 2003, we completed the acquisition of MediaQ, Inc., or MediaQ, a leading provider of graphics and multimedia technology for wireless mobile devices, for an aggregate purchase price that consisted of cash consideration of approximately $71.3 million, including $1.3 million of direct acquisition costs. With the integration of MediaQ, w e see an opportunity to leverage NVIDIA s resources and expertise in digital media processing to offer innovative products and thereby increase our revenues by entering into the multimedia handset market.
Microsoft Xbox
On August 14, 2003, Microsoft announced that it had entered into an agreement with one of our competitors to develop technology for future Xbox products and services. The impact that this announcement may have on our future revenue from the sale of Xbox processors to Microsoft is uncertain, but we do not believe that it will have a significant impact upon us for at least 18 24 months. Revenue from Microsoft during fiscal 2004, fiscal 2003 and fiscal 2002 accounted for 15%, 23% and 9%, respectively, of our total revenue.
12
Future Objectives and Challenges
Peripheral Component Interconnect Express, or PCI-Express
PCI Express is expected to enable a new level of performance for high bandwidth applications like graphics and networking. The transition to PCI Express, which is extremely complex, is central to our GPU and MCP objectives this year. We intend to lead this transition using a PCI Express high-speed interconnect, or HSI. HSI is a complex piece of networking technology that performs high-speed bi-directional interconnect protocol conversion. Using HSI, we expect to transform some of our GPUs into PCI Express compatible GPUs. With our PCI Express compatible GPUs, we expect that our partners will be able to launch PCI Express compatible solutions in April 2004. During fiscal 2005, we expect to launch and be in full production with a top-to-bottom product line of next generation PCI Express GPUs based on our brand new NV4X architecture.
Gross Margin Improvement
We remain intensely focused on driving down cost and improving gross margins. With the scale of our business, we believe driving gross margins to our historical levels can result in earnings improvements.
nForce3
Just as nForce2 was the driver for our platform processor business growth in fiscal 2004, nForce3 has the potential to achieve similar results for fiscal 2005. Our MCP objective is to innovate in all areas of features, performance and compatibility. During the first quarter of fiscal 2005, we intend to launch our next nForce3, which is expected to be the first single-chip MCP to offer gigabit Ethernet, dual independent serial Advanced Technology Attachment, or ATA, controllers, industry leading Redundant Array of Independent Disks, or RAID, features and hardware security processing.
Handsets
Our handheld objective is to drive the multimedia handheld era by building exciting products that leverage NVIDIA s expertise, resources, and investments in digital media processing. The first quarter of fiscal 2005 will mark the beginning of a series of introductions of exciting new ultra-low power media processors for handsets. Over the next several years, digital media processing technologies are expected to play a critical role in the cell phone industry. Cell phones that take digital pictures will eclipse shipments of digital cameras. With the UMPs on our roadmap, future cell phones will be able to receive television programs, record digital video like a camcorder, enable video phone calls, and be your portable game player.
.11 Micron Process
On February 24, 2004, we announced that we will be one of the first semiconductor companies to manufacture select up-coming GPUs at TSMC's 0.11 um (micron) process technology. We will combine TSMC's 0.11 micron process with our own engineering designs, to deliver high-performance and low-power consumption in a graphics processor. TSMC's 0.11 micron process technology is fundamentally a photolithographic shrink of its industry-leading 0.13 micron process. Though actual results are design-dependent, TSMC's 0.11 micron high-performance process also includes transistor enhancements that improve speed and reduce power consumption relative to its 0.13 micron technology.
Critical Accounting Policies and Estimates
Management s discussion and analysis of financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates, including those related to revenue recognition, accounts receivable, inventories, long-lived assets, goodwill, income taxes, stock-based compensation and contingencies. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities.
13
We believe the following critical accounting policies affect our significant judgments and estimates used in the preparation of our condensed consolidated financial statements. Our management has discussed the development and selection of these critical accounting policies and estimates with the audit committee of our board of directors and the audit committee has reviewed our disclosures relating to them in this report.
Revenue Recognition
We recognize revenue from product sales when persuasive evidence of an arrangement exists, the product has been delivered, the price is fixed and determinable and collection is reasonably assured. For all sales, we use a binding purchase order and in certain cases we use a contractual agreement as evidence of an arrangement. We consider delivery to occur upon shipment provided title and risk of loss have passed to the customer. At the point of sale, we assess whether the arrangement fee is fixed and determinable and whether collection is reasonably assured. If we determine that collection of a fee is not reasonably assured, we defer the fee and recognize revenue at the time collection becomes reasonably assured, which is generally upon receipt of cash.
Our policy on sales to distributors and stocking representatives is to defer recognition of revenue and related cost of revenue until the distributors and representatives resell the product.
We record estimated reductions to revenue for customer programs at the time revenue is recognized. Our customer programs primarily involve rebates, which are designed to serve as sales incentives to resellers of our products in various target markets. We account for rebates in accordance with Emerging Issues Task Force Issue 01-9, or EITF 01-9, Accounting for Consideration Given by a Vendor to a Customer (Including a Reseller of the Vendor s Products) and, as such, we accrue for 100% of the potential rebates and do not apply a breakage factor. Unclaimed rebates, which historically have not been significant, are reversed to revenue upon expiration of the rebate. Rebates typically expire six months from the date of the original sale.
Our customer programs also include marketing development funds, or MDFs, which we also account for in accordance with EITF 01-9. MDFs represent monies paid to retailers, system builders, OEMs, distributors and add-in card partners that are earmarked for market segment development and expansion and typically are designed to support our partners activities while also promoting NVIDIA products.
If market conditions decline, we may take actions to increase amounts offered under customer programs, possibly resulting in an incremental reduction of revenue at the time such programs are offered.
We also record a reduction to revenue by establishing a sales return allowance for estimated product returns at the time revenue is recognized, based primarily on historical return rates. However, if product returns for a particular fiscal period exceed historical return rates we may determine that additional sales return allowances are required to properly reflect our estimated exposure for product returns.
Accounts Receivable
We maintain an allowance for doubtful accounts receivable for estimated losses resulting from the inability of our customers to make required payments. Management determines this allowance, which consists of an amount identified for specific customer issues as well as an amount based on general estimated exposure. Our overall estimated exposure excludes amounts covered by credit insurance and letters of credit. If the financial condition of our customers or insurance carrier were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required that could adversely affect our operating results. Furthermore, there can be no assurance that we will be able to obtain credit insurance in the future. Our current credit insurance agreement expires on December 31, 2004.
As of January 25, 2004, our allowance for doubtful accounts receivable was $2.3 million and our gross accounts receivable balance was $219.5 million. Of the $219.5 million, $39.7 million was covered by credit insurance and $3.0 million was covered by letters of credit. As a percentage of our gross accounts receivable balance, our allowance for doubtful accounts receivable has ranged between 1% and 2%. As of January 25, 2004, our allowance for doubtful accounts receivable represented 1% of our gross accounts receivable balance. If our allowance for doubtful accounts receivable would have been recorded at 2% of our gross accounts receivable balance, then our allowance for doubtful accounts receivable balance at January 25, 2004 would have been approximately $4.4 million, rather than the actual balance of $2.3 million.
14
Inventories
We write down our inventory for estimated lower of cost or market, obsolescence or unmarketable inventory equal to the difference between the cost of inventory and the estimated market value based upon assumptions about future demand and market conditions. If actual market conditions are less favorable than those projected by management, additional inventory write-downs may be required that could adversely affect our operating results. If actual market conditions are more favorable, we may have higher gross margins when products are sold. No significant sales of such products have occurred to date.
Valuation of Long-lived Assets
We review long-lived assets, such as property and equipment, and intangible assets subject to amortization, whenever events or changes in circumstances indicate that the carrying amount of such assets may not be recoverable. We utilize a two-step approach to testing long-lived assets for impairment. The first step tests for possible impairment indicators. If an impairment indicator is present, the second step measures whether the asset is recoverable based on a comparison of the carrying amount of the asset to the estimated undiscounted future cash flows expected to be generated by the asset. If the carrying amount of an asset exceeds its estimated future cash flows, an impairment charge is recognized by the amount by which the carrying amount of the asset exceeds the fair value of the asset. Our review requires the use of judgment and estimates. No such impairment charges have occurred to date. However, future events or circumstances may result in a charge to earnings if we determine that the carrying value of a long-lived asset is not recoverable.
Goodwill
We utilize a two-step approach to testing goodwill for impairment. The first step tests for possible impairment by applying a fair value-based test. The second step (if necessary) measures the amount of such an impairment by applying fair value-based tests to individual assets and liabilities. We elected to perform our annual goodwill impairment review during the fourth quarter of each fiscal year. We completed our annual impairment test during the fourth quarter of fiscal 2004 and concluded that there was no impairment. However, future events or circumstances may result in a charge to earnings due to the potential for a write down of goodwill in connection with such tests.
Income Taxes
Statement of Financial Accounting Standards No. 109, or SFAS No. 109, Accounting for Income Taxes , establishes financial accounting and reporting standards for the effect of income taxes. In accordance with SFAS No. 109, we recognize federal, state and foreign current tax liabilities or assets based on our estimate of taxes payable or refundable in the current fiscal year by tax jurisdiction. We also recognize federal, state and foreign deferred tax assets or liabilities for our estimate of future tax effects attributable to temporary differences and carryforwards; and we record a valuation allowance to reduce any deferred tax assets by the amount of any tax benefits that, based on available evidence and judgment, are not expected to be realized.
Our calculation of current and deferred tax assets and liabilities is based on certain estimates and judgments and involves dealing with uncertainties in the application of complex tax laws. Our estimates of current and deferred tax assets and liabilities may change based, in part, on added certainty or finality to an anticipated outcome, changes in accounting or tax laws in the United States, or U.S., or foreign jurisdictions where we operate, or changes in other facts or circumstances. In addition, we recognize liabilities for potential U.S. and foreign income tax contingencies based on our estimate of whether, and the extent to which, additional taxes may be due. If we determine that payment of these amounts is unnecessary or if the recorded tax liability is less than our current assessment, we may be required to recognize an income tax benefit or additional income tax expense in our financial statements, accordingly.
15
As of January 25, 2004, we had a valuation allowance of $182.7 million. Of the total valuation allowance, $117.0 million is attributable to certain net operating loss and tax credit carryforwards resulting from the exercise of employee stock options. The tax benefit of these net operating loss and tax credit carryforwards, if and when realization is sustained, will be accounted for as a credit to stockholders' equity. Of the remaining valuation allowance at January 25, 2004, $21.4 million relates to federal and state tax attributes acquired in certain acquisitions for which realization of the related deferred tax assets was determined not more likely than not to be realized due, in part, to potential utilization limitations as a result of ownership changes; and $44.3 million relates to certain state deferred tax assets that management determined not more likely than not to be realized due, in part, to projections of future taxable income. To the extent realization of the deferred tax assets related to certain acquisitions becomes probable, recognition of these tax benefits would first reduce goodwill to zero, then reduce other non-current intangible assets related to the acquisition to zero with any remaining benefit reported as a reduction to income tax expense. To the extent realization of the deferred tax assets related to certain state tax benefits becomes probable, we would recognize an income tax benefit in the period such asset is more likely than not to be realized.
Contingencies
We are subject to the possibility of various loss contingencies arising in the ordinary course of business. We consider the likelihood of loss or impairment of an asset or the incurrence of a liability, as well as our ability to reasonably estimate the amount of loss in determining loss contingencies. An estimated loss contingency is accrued when it is probable that an asset has been impaired or a liability has been incurred and the amount of loss can be reasonably estimated. We regularly evaluate current information available to us to determine whether such accruals should be adjusted and whether new accruals are required.
Results of Operations
The following table sets forth, for the periods indicated, certain items in our consolidated statements of income expressed as a percentage of revenue.
Year Ended
January 25,
January 26,
January 27,
2004
2003
2002
Revenue
100.0%
100.0%
100.0%
Cost of revenue
71.0
69.5
62.1
Cost of revenue related to stock option exchange
--
0.3
--
Gross profit
29.0
30.2
37.9
Operating expenses:
Research and development
14.8
11.8
11.3
Sales, general and administrative
9.1
7.9
7.2
In-process research and development
0.2
--
--
Stock option exchange
--
2.9
--
Amortization of goodwill
0.0
0.0
0.7
Acquisition related charges
0.0
0.0
0.7
Discontinued use of property
0.0
0.0
0.3
Total operating expenses
24.1
22.6
20.2
Income from operations
4.9
7.6
17.7
Interest and other income, net
0.5
0.3
0.8
Convertible debenture redemption expense
(0.7)
0.0
0.0
Income before income tax expense
4.7
7.9
18.5
Income tax expense
0.6
3.1
5.5
Net income
4.1 %
4.8 %
13.0 %
16
Fiscal Years Ended January 25, 2004, January 26, 2003, and January 27, 2002
Revenue
Revenue was $1.82 billion in fiscal 2004, $1.91 billion in fiscal 2003, and $1.37 billion in fiscal 2002, which represented a decrease of 5% from fiscal 2003 to 2004 and an increase of 39% from fiscal 2002 to 2003. The revenue decrease from fiscal 2003 to fiscal 2004 was primarily the result of a significant decrease in sales of Xbox processors to Microsoft, offset by growth in our GPU, MCP and UMP products. The revenue growth from fiscal 2002 to fiscal 2003 was primarily the result of significant sales of Xbox processors in addition to the strong overall demand for our GPU and MCP products.
Revenue from sales to customers outside of the United States and other Americas accounted for 75%, 68% and 82% of total revenue for fiscal 2004, 2003 and 2002, respectively. Revenue by geographic region is allocated to individual countries based on the location to which the products are initially billed even if the foreign CEMs and add-in board and motherboard manufacturers revenue is attributable to end customers in a different location. The increase in the percentage of revenue from sales to customers outside of the United States and other Americas for fiscal 2004 as compared to fiscal 2003 is primarily due to decreased sales of XGPUs and MCPs used in the Microsoft Xbox product, which are billed to Microsoft in the United States. The decrease in the percentage of revenue from sales to customers outside of the United States for fiscal 2003 as compared to fiscal 2002 is primarily due to increased sales of XGPUs and MCPs used in the Microsoft Xbox product.
Sales to Microsoft accounted for approximately 15% of revenues for fiscal 2004. Our other three largest customers accounted for approximately 45% of revenues for fiscal 2004. In fiscal 2003, sales to Microsoft accounted for approximately 23% of revenues. Our other three largest customers accounted for approximately 41% of revenues for fiscal 2003. In fiscal 2002, sales to Microsoft accounted for approximately 9% of revenues. Our other three largest customers accounted for approximately 44% of revenues for fiscal 2002.
In future periods, our revenue may be affected by demand for and market acceptance of our products and/or our customers products, our ability to successfully develop and produce our products in volume production, competitive pressures resulting in lower than expected average selling prices, and new product announcements or product introductions by our competitors.
Gross Profit
Gross profit consists of total revenue, net of allowances, less cost of revenue. Cost of revenue consists primarily of the cost of semiconductors purchased from subcontractors (including wafer fabrication, assembly, testing and packaging), manufacturing support costs (including labor and overhead associated with such purchases), final test yield fallout, inventory provisions and shipping costs. Gross margin is the ratio of gross profit to revenue. Our gross margin can vary in any period depending on the mix of types of products sold.
Our gross margin was 29%, 30% and 38% in fiscal 2004, 2003 and 2002, respectively. Gross margin for fiscal 2004 as compared to fiscal 2003 decreased primarily due to a shift in the mix of product sales to our new generation of GeForce FX products. Our GeForce FX products generally have experienced lower gross margins than previous GeForce products. This decrease was offset by an increase in gross margins on sales of Xbox processors in fiscal 2004 when compared to fiscal 2003, which resulted from the pricing settlement with Microsoft that we announced on February 6, 2003. Gross margin for fiscal 2003 as compared to fiscal 2002 decreased primarily due to a shift in mix of product sales that included more sales of Xbox processors which, at that time, generally had lower margins than our other products. In addition, the decrease was due to an inventory write-down of approximately $21.0 million related to certain Xbox processors and nForce platform processors during the second quarter of fiscal 2003, and the stock option exchange expense of $6.2 million that was charged to cost of revenue related to manufacturing personnel during the third quarter of fiscal 2003.
In the future, we could be subject to excess or obsolete inventories and be required to take additional write-downs if growth slows or if we incorrectly forecast product demand. A reduction in demand and market acceptance of our products and/or our customers products could also negatively impact our gross margins. We do not expect past results to be indicative of future periods. We remain intensely focused on driving down cost and improving gross margins. We expect improvement in our gross margins and believe our gross margins can be 30% or more.
Operating Expenses
Research and Development. Research and development expenses consist of salaries and benefits, cost of development tools and software, cost of new product prototypes and consultant costs. Research and development expenses increased by $45.1 million, or 20%, from fiscal 2003 to fiscal 2004 primarily due to a $33.2 million increase related to additional personnel, including approximately 60 employees that we obtained as a result of our acquisition of MediaQ, a $21.2 million increase associated with lab equipment, software licenses, maintenance fees and increased depreciation and amortization charges, and a $2.0 million increase in facility expenses, offset by a $11.3 million decrease in new product development costs and other expenses during the period. Research and development expenses increased by $70.1 million, or 45%, from fiscal 2002 to 2003 primarily due to a $32.9 million increase related to additional personnel, a $22.2 million increase associated with lab equipment, software licenses, maintenance fees and depreciation charges, a $4.5 million increase related to engineering costs to develop next generation products, and a $10.5 million increase in facilities costs due to the move into a new building at our headquarters and a full year of occupation in all headquarter buildings as well as other expenses during the year.
17
We anticipate that we will continue to devote substantial resources to research and development, and we expect these expenses to increase in absolute dollars in the foreseeable future due to the increased complexity and the greater number of products under development. Research and development expenses are likely to fluctuate from time to time to the extent we make periodic incremental investments in research and development and these investments may be independent of our level of revenues.
Sales, General and Administrative. Sales, general and administrative expenses consist primarily of salaries, commissions and bonuses, promotional tradeshow and advertising expenses, travel and entertainment expenses and legal and accounting expenses. Sales, general and administrative expenses increased $13.8 million, or 9%, from fiscal 2003 to fiscal 2004 primarily due to a $12.9 million increase related to additional personnel, a $9.1 million increase in tradeshow, marketing development and general administrative activities and a $3.2 million increase in computer software and equipment related to the enhancement of our computer systems and the depreciation and amortization of new equipment. These increases were offset by an $11.4 million decrease in legal fees related to higher legal fees incurred during fiscal 2003 for various issues that have since been resolved, including the SEC inquiry, Microsoft arbitration and shareholder lawsuits. Sales, general and administrative expenses increased $52.5 million, or 53%, from fiscal 2002 to 2003 primarily due to a $16.4 million increase related to additional personnel and commissions, a $16.6 million increase in legal and accounting expenses associated with various legal proceedings, a $9.0 million increase in equipment and software primarily related to the enhancement of our computer systems, a $7.9 million increase in tradeshow and product launch costs, and a $2.6 million increase in facilities costs due to the move into a new building at our headquarters and a full year of occupation in all headquarter buildings as well as other increases associated with general administrative activities and travel and entertainment expenses.
We expect sales, general and administrative expenses to continue to increase in absolute dollars as we continue to support our operations, expand our sales, launch our new products and protect our business interests.
In-process research and development. In connection with our acquisition of MediaQ in August 2003, we wrote-off $3.5 million of in-process research and development expense, or IPR&D, that had not yet reached technological feasibility and has no alternative future use. In accordance with SFAS No. 2, Accounting for Research and Development Costs , as clarified by FIN 4, Applicability of SFAS No. 2 to Business Combinations Accounted for by the Purchase Method an interpretation of SFAS No. 2 , amounts assigned to IPR&D meeting the above-stated criteria must be charged to expense as part of the allocation of the purchase price.
Stock Option Exchange. On September 26, 2002, we commenced an offer, or the Offer, to our employees to exchange outstanding stock options with exercise prices equal to or greater than $27.00 per share, or Eligible Options. Stock options to purchase an aggregate of approximately 20,615,000 shares were eligible for tender at the commencement of the Offer, representing approximately 39% of our outstanding stock options as of the commencement date. Only employees of NVIDIA or one of our subsidiaries as of September 26, 2002 who continued to be employees through the Offer termination date of October 24, 2002 were eligible to participate in the Offer. Employees who were on medical, maternity, worker s compensation, military or other statutorily protected leave of absence, or a personal leave of absence, were also eligible to participate in the Offer. Employees who were terminated on or before the Offer termination date of October 24, 2002, were not eligible to participate in the Offer. In addition, our Chief Executive Officer and Chief Financial Officer and members of our Board of Directors were not eligible to participate in this Offer.
On October 24, 2002, the offer period ended and we were obligated to exchange approximately 18,843,000 Eligible Options for total consideration of $61.8 million, consisting of $39.9 million in fully vested, non-forfeitable shares of our common stock (approximately 3,815,000 shares) and $21.9 million in employer and employee related taxes. The number of fully vested, non-forfeitable shares of our common stock to be issued was determined by dividing the total consideration due (less the amount of applicable tax withholdings) by the closing price of our common stock on October 24, 2002, of $10.46 per share.
18
Amortization of Goodwill. During fiscal 2002, amortization of goodwill was associated with goodwill from the asset purchase from 3dfx. The initial allocation of the purchase price included $57.4 million of goodwill, plus approximately $3.0 million of intangible assets previously allocated to workforce in place, which was reclassified into goodwill as of the beginning of fiscal 2003.
In accordance with SFAS No. 142, Goodwill and Other Intangible Assets , we no longer amortize goodwill as of the beginning of fiscal 2003. We have elected to perform our annual impairment review during the fourth quarter of each fiscal year. We completed our annual goodwill impairment test for fiscal 2004 and concluded that there was no impairment.
Acquisition Related Charges. Acquisition related charges are attributable to expenses related to the acquisition of assets from 3dfx in fiscal 2002. These charges primarily consisted of bonuses to former 3dfx employees.
Discontinued Use of Property. Discontinued use of property consists of write-offs of $3.7 million relating to our previous office space in Santa Clara, California. Since we relocated in June 2001, we have been unable to secure a subtenant for our previous office space due to the decrease in demand for commercial rental space in Silicon Valley. The write-offs consist of all remaining costs related to the preexisting lease, including rental payments, capitalized leasehold improvements, and furniture and fixtures. In December 2001, we filed a complaint against Extreme Networks Inc., the sublessor of the property, seeking payment of lease payments and other property charges for the period of July 2001 through December 2001 and seeking a declaration that we are not liable for any future payments under the lease. In July, 2003, we settled the matter with Extreme Networks and in August, 2003, the complaint was dismissed with prejudice.
Interest Income and Interest Expense
Interest income consists of interest earned on cash, cash equivalents and marketable securities. Interest income decreased from $23.2 million to $18.6 million from fiscal 2003 to fiscal 2004 primarily due to lower average balances of cash, cash equivalents and marketable securities in fiscal 2004 when compared to fiscal 2003. This was caused by the redemption of our $300.0 million convertible subordinated debentures in October 2003. Interest income decreased from $27.7 million to $23.2 million from fiscal 2002 to fiscal 2003 primarily due to the decline in market interest rates.
Interest expense primarily consists of interest incurred as a result of capital lease obligations and, prior to the redemption in October 2003, interest on our convertible subordinated debentures. Interest expense decreased from $16.5 million to $12.0 million from fiscal 2003 to fiscal 2004 primarily due to the redemption of our convertible subordinated debentures.
Other Income (Expense), net
Other income and expense primarily consists of realized gains and losses on the sale of marketable securities and any gains or losses related to the disposal of fixed assets. Other income increased by $3.2 million from fiscal 2003 to fiscal 2004 primarily due to $2.5 million of realized gains on the sale of marketable securities during the third quarter of fiscal 2004 as a result of our liquidation of a significant portion of our marketable securities portfolio in order to obtain the cash required to redeem our convertible subordinated debentures in October 2003.
Convertible Debenture Redemption Expense
On October 24, 2003, we fully redeemed our $300.0 million of 4 % convertible subordinated debentures due 2007, or the Notes. The aggregate principal amount of the Notes outstanding was $300.0 million, which included $18.6 million of Notes that we had purchased in the open market during the three months ended October 26, 2003. The redemption price was equal to approximately 102.7% of the outstanding principal amount of the Notes, plus accrued and unpaid interest up to, but excluding, the redemption date. In connection with the redemption of the Notes, we recorded a one-time charge of approximately $13.1 million, which included a $7.6 million redemption premium and $5.5 million of unamortized issuance costs.
19
Income Taxes
We recognized income tax expense of $12.3 million, $59.8 million and $75.8 million in fiscal 2004, 2003 and 2002 respectively. Income tax expense as a percentage of income before taxes, or our annual effective tax rate, was 14.1% in fiscal 2004, 39.7% in fiscal 2003 and 30.0% in fiscal 2002.
Significant items impacting our annual effective tax rate in fiscal 2004 included the $3.5 million MediaQ IPR&D write-off for which no tax benefit was recognized, the $75.0 million income tax benefit of certain tax contingencies as a result of settlement of our IRS exam, the $38.2 million income tax expense for the accrual of U.S. deferred income taxes on previous permanently reinvested foreign earnings and the $33.6 million income tax expense for the establishment of a valuation allowance on certain previously recognized state deferred tax assets determined not more likely than not to be realized due, in part, to projections of future sources of taxable income.
Please refer to Note 14 of the Notes to the Consolidated Financial Statements for further information regarding the components of income tax expense.
The increase in our annual effective tax rate from fiscal 2002 to fiscal 2003 was primarily due to our not recording any income tax expense or benefit for the third quarter of fiscal 2003 as our loss before income tax expense for that quarter was primarily attributable to a stock compensation charge for which no tax benefit may be available.
We expect our annual effective income tax rate to be 20% for fiscal 2005. Please refer to Part II, Item 7 "Critical Accounting Policies - Income Taxes" for items that may affect this estimate.
Liquidity and Capital Resources
As of January 25, 2004, we had $604.0 million in cash, cash equivalents and marketable securities, a decrease of $424.4 million from the end of fiscal 2003. The decrease was primarily due to the $300.0 million redemption of the Notes in October 2003 and the $71.3 million acquisition of MediaQ in August 2003. Our portfolio of cash equivalents and marketable securities is managed by several financial institutions. Our investment policy requires the purchase of top-tier investment grade securities, the diversification of asset type and certain limits on our portfolio duration.
Operating activities generated cash of $49.7 million, $265.0 million and $160.8 million during fiscal 2004, 2003 and 2002, respectively. The decrease in cash flows from operating activities in fiscal 2004 when compared to fiscal 2003 was primarily due to the increase in inventory and decrease in income taxes payable due to the settlement of certain tax contingencies.
Cash used in investing activities has consisted primarily of investments in marketable securities, the purchase of certain assets from various businesses and purchases of property and equipment, which include leasehold improvements for our facilities. Investing activities provided cash of $88.0 million and used cash of $277.3 million during fiscal 2004 and 2003, respectively. Net cash provided by investing activities in fiscal 2004 was primarily due to $286.9 million of net sales and maturities of marketable securities as we liquidated a significant portion of our marketable securities portfolio in order to obtain the cash required to redeem the $300.0 million Notes in October 2003. This increase in cash from sales and maturities of marketable securities was offset by $127.6 million in capital expenditures primarily attributable to purchases of new research and development emulation equipment, technology licenses and software and $71.3 million for the acquisition of MediaQ. We expect to spend approximately $80.0 million to $100.0 million for capital expenditures during fiscal 2005, primarily for software licenses, emulation equipment, computer and engineering workstations. In addition, we may continue to use cash in connection with the acquisition of new businesses or assets.
Financing activities used cash of $270.3 million during fiscal 2004 compared to cash provided of $26.3 million in fiscal 2003. The increase in cash used in fiscal 2004 when compared to fiscal 2003 was primarily due to the $300.0 million redemption of the Notes, which included $18.6 million of Notes that we had purchased during the three months ended October 26, 2003.
20
Operating Capital and Capital Expenditure Requirements
We believe that our existing cash balances and anticipated cash flows from operations will be sufficient to meet our operating, acquisition and capital requirements for at least the next 12 months. However, there is no assurance that we will not need to raise additional equity or debt financing within this time frame. Additional financing may not be available on favorable terms or at all and may be dilutive to our then-current stockholders. We also may require additional capital for other purposes not presently contemplated. If we are unable to obtain sufficient capital, we could be required to curtail capital equipment purchases or research and development expenditures, which could harm our business. Factors that could affect our cash used or generated from operations and, as a result, our need to seek additional borrowings or capital include:
decreased demand and market acceptance for our products and/or our customers products;
inability to successfully develop and produce in volume production our next-generation products;
competitive pressures resulting in lower than expected average selling prices; and
new product announcements or product introductions by our competitors.
For additional factors see "Business Risks Our operating results are unpredictable and may fluctuate, and if our operating results are below the expectations of securities analysts or investors, our stock price could decline."
Other key factors that could affect our liquidity include:
Shelf Registration Statement
In December 2003, we filed a Form S-3 with the Securities and Exchange Commission, or SEC, under their "shelf" registration process. This shelf registration was declared effective by the SEC on March 25, 2004. Under this shelf registration process, we may sell common stock, preferred stock, debt securities, warrants, stock purchase contracts and/or stock purchase units in one or more offerings up to a total dollar amount of $500.0 million. Unless otherwise indicated in the applicable prospectus supplement, we intend to use the proceeds for working capital and general corporate purposes. In particular, we expect to incur significant operating expenses in connection with:
continuing to develop our technology;
hiring additional personnel;
expanding our sales and marketing organization and activities;
acquiring complementary technologies or businesses; and
capital expenditures
3dfx Asset Purchase
The 3dfx asset purchase closed on April 18, 2001. Under the terms of the Asset Purchase Agreement, the cash consideration due at the closing was $70.0 million, less $15.0 million that was loaned to 3dfx pursuant to a Credit Agreement dated December 15, 2000. The Asset Purchase Agreement also provided, subject to the other provisions thereof, that if 3dfx properly certified that all its debts and other liabilities had been provided for, then we would have been obligated to pay 3dfx two million shares of NVIDIA common stock. If 3dfx could not make such a certification, but instead properly certified that its debts and liabilities could be satisfied for less than $25.0 million, then 3dfx could have elected to receive a cash payment equal to the amount of such debts and liabilities and a reduced number of shares of our common stock, with such reduction calculated by dividing the cash payment by $25.00 per share. If 3dfx could not certify that all of its debts and liabilities had been provided for, or could not be satisfied, for less than $25.0 million, we would not be obligated under the agreement to pay any additional consideration for the assets. We are currently party to litigation relating to certain aspects of the asset purchase and 3dfx s subsequent bankruptcy in October 2002. Please refer to Note 13 of the Notes to the Consolidated Financial Statements for further information regarding this litigation.
21
Contractual Obligations
The following summarizes our contractual obligations that are both on our balance sheet and off balance sheet as of January 25, 2004 and the effect such obligations are expected to have on our liquidity and cash flow in future periods:
Contractual Obligations
Total
Within 1 Year
2 3 Years
4-5 Years
After 5 Years
(in thousands)
Capital lease obligations, including interest
5,047
4,179
868
--
--
Operating leases
206,242
24,635
49,950
50,625
81,032
Purchase obligations (1)
213,289
213,289
--
--
--
Other liabilities reflected on our balance sheet under GAAP
6,520
2,020
3,000
1,500
--
Total contractual obligations
431,098
244,123
53,818
52,125
81,032
_________________
(1)Represents our noncancelable inventory purchase commitments as of January 25, 2004.
Recent Accounting Pronouncements
Information regarding recent accounting pronouncements is set forth in Note 1 of the Notes to Consolidated Financial Statements under the subheading "New Accounting Pronouncements," which information is hereby incorporated by reference.
22
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Interest Rate Risk
We invest in a variety of financial instruments, consisting principally of investments in commercial paper, money market funds and highly liquid debt securities of corporations, municipalities and the U.S. Government and its agencies. These investments are denominated in U.S. dollars.
We account for our investment instruments in accordance with Statement of Financial Accounting Standards No. 115, or SFAS No. 115, Accounting for Certain Investments in Debt and Equity Securities . All of the cash equivalents and marketable securities are treated as "available-for-sale" under SFAS No. 115. Investments in both fixed rate and floating rate interest earning instruments carry a degree of interest rate risk. Fixed rate securities may have their market value adversely impacted due to a rise in interest rates, while floating rate securities may produce less income than expected if interest rates fall. Due in part to these factors, our future investment income may fall short of expectations due to changes in interest rates or we may suffer losses in principal if forced to sell securities that decline in market value due to changes in interest rates. However, because our debt securities are classified as "available-for-sale", no gains or losses are recognized due to changes in interest rates unless such securities are sold prior to maturity. These securities are reported at fair value with the related unrealized gains and losses included in accumulated other comprehensive income, a component of stockholders equity, net of tax. As of January 25, 2004, we performed a sensitivity analysis on our floating and fixed rate financial investments. According to our analysis, parallel shifts in the yield curve of both 50 basis points would result in changes in fair market values for these investments of approximately $2.7 million.
Exchange Rate Risk
We consider our direct exposure to foreign exchange rate fluctuations to be minimal. Currently, sales and arrangements with third-party manufacturers provide for pricing and payment in U.S. dollars, and therefore are not subject to exchange rate fluctuations. To date, we have not engaged in any currency hedging activities, although we may do so in the future. Fluctuations in currency exchange rates could harm our business in the future.
Business Risks
In addition to the risks discussed in "Management's Discussion and Analysis of Financial Condition and Results of Operations," our business is subject to the risks set forth below.
23
Risks Related to Our Operations
Failure to transition to new manufacturing process technologies could affect our ability to compete
effectively.
Our strategy is to utilize the most advanced process technology appropriate for our products and available from commercial third-party foundries. Use of advanced processes may have greater risk of initial yield problems and higher product cost. Manufacturing process technologies are subject to rapid change and require significant expenditures for research and development. We continuously evaluate the benefits of migrating to smaller geometry process technologies in order to improve performance and reduce costs. We currently use 0.15-micron, 0.14 micron and 0.13 micron process technologies for our family of GPUs, MCPs and UMPs. The majority of our newest GPUs, the GeForce FX and the GeForce FX Go products are manufactured in 0.13-micron process technology.
We believe that the transition of our products to increasingly smaller geometries will be important to our competitive position. On February 24, 2004, we announced that we will be one of the first semiconductor companies to manufacture select up-coming GPUs at TSMC's 0.11 um (micron) process technology.
We have experienced difficulty in migrating to new manufacturing processes in the past and, consequently, have suffered reduced yields, delays in product deliveries and increased expense levels. Moreover, we are dependent on our relationships with our third-party manufacturers to migrate to smaller geometry processes successfully. We may continue to have difficulty migrating to new manufacturing process technologies successfully or on a timely basis. Our inability to transition to new manufacturing process technologies may adversely affect our operating results and harm our gross margins.
Failure to achieve expected manufacturing yields for existing and/or new products would reduce our gross margins.
Semiconductor manufacturing yields are a function both of product design, which is developed largely by us, and process technology, which typically is proprietary to the manufacturer. Since low yields may result from either design or process technology failures, yield problems may not be effectively determined or resolved until an actual product exists that can be analyzed and tested to identify process sensitivities relating to the design rules that are used. As a result, yield problems may not be identified until well into the production process, and resolution of yield problems would require cooperation by and communication between us and the manufacturer.
Because of our potentially limited access to wafer fabrication capacity from our manufacturers, any decrease in manufacturing yields could result in an increase in our per unit costs and force us to allocate our available product supply among our customers. This could potentially harm customer relationships, as well as revenue and gross profit. Our wafer manufacturers may be unable to achieve or maintain acceptable manufacturing yields in the future. Our inability to achieve planned yields from our wafer manufacturers could harm our business. We also face the risk of product recalls or product returns resulting from design or manufacturing defects that are not discovered during the manufacturing and testing process. In the event of a significant number of product returns due to a defect or recall, our business could suffer.
We are dependent on key personnel and the loss of these employees could harm our business.
Our performance is substantially dependent on the performance of our executive officers and key employees. Marv Burkett and David Shannon are our only officers or employees bound by an employment agreement, and so our relationships with our other officers and employees are at will. We do not have "key person" life insurance policies on any of our employees. The loss of the services of any of our executive officers, technical personnel or other key employees, particularly Jen-Hsun Huang, our President and Chief Executive Officer, would harm our business. Our success will depend on our ability to identify, hire, train and retain highly qualified technical and managerial personnel. Our failure to attract and retain the necessary technical and managerial personnel would harm our business.
Our failure to estimate customer demand properly may result in excess or obsolete inventory that could adversely affect our gross margins.
Inventory purchases are based upon future demand forecasts. If there were to be a sudden and significant decrease in demand for our products, or if there were a higher incidence of inventory obsolescence because of rapidly changing technology and customer requirements, we could be required to write-down our inventory and our gross margins could be adversely affected.
24
Our operating results are unpredictable and may fluctuate, and if our operating results are below the expectations of securities analysts or investors our stock price could decline .
Many of our revenue components fluctuate and are difficult to predict, and our operating expenses are largely independent of revenue in any particular period. It is therefore difficult for us to accurately forecast revenue and profits or losses. As a result, it is possible that in some quarters our operating results could be below the expectations of securities analysts or investors, which could cause the trading price of our common stock to decline, perhaps substantially. We believe that our quarterly and annual results of operations may be affected by a variety of factors that could harm our revenue, gross profit and results of operations.
Factors that have affected our results of operations in the past, and could affect our results of operations in the future, include the following:
demand and market acceptance for our products and/or our customers products;
the successful development and volume production of next-generation products;
new product announcements or product introductions by our competitors;
our ability to introduce new products in accordance with original equipment manufacturers , or OEMs , design requirements and design cycles;
changes in the timing of product orders due to unexpected delays in the introduction of our customers products;
fluctuations in the availability of manufacturing capacity or manufacturing yields;
declines in spending by corporations and consumers related to perceptions regarding an economic downturn in the U.S. and international economies;
competitive pressures resulting in lower than expected average selling prices;
product rates of return in excess of that forecasted or expected due to quality issues;
the rescheduling or cancellation of customer orders;
the loss of a key customer or the termination of a strategic relationship;
seasonal fluctuations associated with the PC market;
substantial disruption in our suppliers operations, either as a result of a natural disaster, equipment failure, terrorism or other cause;
supply constraints for and changes in the cost of the other components incorporated into our customers products, including memory devices;
our ability to reduce the manufacturing costs of our products;
legal and other costs related to defending intellectual property and other types of lawsuits;
customer receivable bad debt write-offs;
costs associated with the repair and replacement of defective products;
unexpected inventory write-downs; and
introductions of enabling technologies to keep pace with faster generations of processors and controllers.
Any one or more of the factors discussed above could prevent us from achieving our expected future revenue or net income. Accordingly, we believe that period-to-period comparisons of our results of operations should not be relied upon as an indication of future performance. In addition, the results of any quarterly period are not indicative of results to be expected for a full fiscal year.
25
Our operating expenses are relatively fixed, and we order materials in advance of anticipated customer demand. Therefore, we have limited ability to reduce expenses quickly in response to any revenue shortfalls.
Most of our operating expenses are relatively fixed in the short term, and we may be unable to adjust spending sufficiently in a timely manner to compensate for any unexpected sales shortfall. Substantially all of our sales are made on the basis of purchase orders rather than long-term agreements. As a result, we may commit resources to the production of products without having received advance purchase commitments from customers. Any inability to sell products to which we have devoted significant resources could harm our business. In addition, cancellation or deferral of product orders could result in our holding excess inventory, which could adversely affect our profit margins and restrict our ability to fund operations. We may build inventories during periods of anticipated growth and in connection with selling workstation boards directly to major OEMs. We could be subject to excess or obsolete inventories and be required to take corresponding inventory write-downs if growth slows or if we incorrectly forecast product demand. A reduction in demand could negatively impact our gross margins and financial results.
To stay competitive, we may have to invest more resources in research and development.
If new competitors, technological advances by existing competitors or other competitive factors require us to invest significantly greater resources than anticipated in research and development or sales and marketing efforts, our business could suffer. We have substantially increased our engineering and technical resources and have 1,057 full-time employees engaged in research and development as of January 25, 2004, compared to 832 employees as of January 26, 2003. During fiscal years 2004, 2003 and 2002, research and development expenditures represented 15%, 12% and 11% as a percentage of revenue, respectively.
Risks Related to Our Products
PCI Express is central to our GPU as well as MCP strategies this year and the outcome of this strategy will impact our business.
PCI Express is expected to enable a new level of performance for high bandwidth applications like graphics and networking. The transition to PCI Express, which is extremely complex, is central to our GPU and MCP strategies this year. We intend to lead this transition using a PCI Express high-speed interconnect, or HSI. HSI is a complex piece of networking technology that performs high-speed bi-directional interconnect protocol conversion. Using HSI, we expect to transform some of our GPUs into PCI Express compatible GPUs. With our PCI Express compatible GPUs, we expect that our partners will be able to launch PCI Express compatible solutions in April 2004. During fiscal 2005, we expect to launch and be in full production with a top-to-bottom product line of next generation PCI Express GPUs based on our brand new NV4X architecture. If we fail to deliver PCI Express in a timely manner or if our PCI Express compatible products do not meet consumer and/or analysts expectations, our business could suffer.
We need to develop new products and to manage product transitions in order to succeed.
Our business depends to a significant extent on our ability to successfully develop new products for our target segments. Our add-in board and motherboard manufacturers, original design manufacturers, or ODMs, and major OEM customers typically introduce new system configurations as often as twice per year, typically based on spring and fall design cycles. Accordingly, our existing products must have competitive performance levels or we must timely introduce new products with such performance characteristics in order to be included in new system configurations. This requires that we do the following:
anticipate the features and functionality that consumers will demand;
incorporate those features and functionalities into products that meet the exacting design requirements of OEMs, ODMs, CEMs and add-in board and motherboard manufacturers;
price our products competitively; and
introduce the products to the market within the limited window for OEMs, ODMs, and add-in board and motherboard manufacturers.
26
As a result, we believe that significant expenditures for research and development will continue to be required in the future. The success of new product introductions will depend on several factors, including the following:
proper new product definition;
timely completion and introduction of new product designs;
the ability of International Business Machines, or IBM, Taiwan Semiconductor Manufacturing Company, or TSMC, United Microelectronics Corporation, or UMC, and any additional third-party manufacturers to effectively manufacture our new products in a timely manner;
the quality of any new products;
differentiation of new products from those of our competitors;
market acceptance of our products and our customers' products; and
availability of adequate quantity and configurations of various types of memory products.
A critical component of our product development effort is our partnerships with leaders in the computer aided design, or CAD, industry. We have invested significant resources to develop relationships with industry leaders, including Cadence Design Systems, Inc., IKOS Systems, Inc. and Synopsys, Inc., often assisting these companies in the product definition of their new products. We believe that forming these relationships and utilizing next-generation development tools to design, simulate and verify our products will help us remain at the forefront of the 3D graphics market and develop products that utilize leading-edge technology on a rapid basis. We believe this approach assists us in meeting the new design schedules of PC manufacturers. If these relationships are not successful, we may not be able to develop new products in a timely manner.
In addition, our strategy includes utilizing the most advanced semiconductor process technology appropriate for our products and available from commercial third-party foundries. Use of advanced processes has in the past resulted in initial yield problems. New products that we introduce may not incorporate the features and functionality demanded by OEMs, ODMs, add-in board and motherboard manufacturers and consumers of personal computers and consumer electronics. In addition, we may not successfully develop or introduce new products in sufficient volumes within the appropriate time to meet both the OEMs design cycles and market demand. We have in the past experienced delays in the development of some new products. Our failure to successfully develop, introduce or achieve market acceptance for new digital media processors would harm our business. In particular, we experienced delays in the introduction of digital media processors using our next generation technology during the first half of fiscal 2004 and any such delays in the future or failure of these or other processors to meet or exceed specifications of competitive products could materially harm our business.
Our failure to identify new product opportunities or develop new products could harm our business.
As our digital media processors develop and competition increases, we anticipate that product life cycles at the high end will remain short and average selling prices will continue to decline. In particular, we expect average selling prices and gross margins for our digital media processors to decline as each product matures and as unit volume increases. As a result, we will need to introduce new products and enhancements to existing products to maintain overall average selling prices and gross margins. In order for our digital media processors to achieve high volumes, leading PC OEMs, ODMs, and add-in board and motherboard manufacturers must select our digital media processor for design into their products, and then successfully complete the designs of their products and sell them. We may be unable to successfully identify new product opportunities or to develop and bring to market in a timely fashion new products. In addition, we cannot guarantee that new products we develop will be selected for design into PC OEMs , ODMs , and add-in board and motherboard manufacturers products, that any new designs will be successfully completed or that any new products will be sold. As the complexity of our products and the manufacturing process for products increases, there is an increasing risk that we will experience problems with the performance of products and that there will be delays in the development, introduction or volume shipment of our products. We may experience difficulties related to the production of current or future products or other factors may delay the introduction or volume sale of new products we developed. In addition, we may be unable to successfully manage the production transition risks with respect to future products. Failure to achieve any of the foregoing with respect to future products or product enhancements could result in rapidly declining average selling prices, reduced margins and reduced demand for products or loss of market share. In addition, technologies developed by others may render our digital media processors non-competitive or obsolete or result in our holding excess inventory, any of which would harm our business.
27
We could suffer a loss of market share if our products contain significant defects.
Products as complex as those offered by us may contain defects or failures when introduced or when new versions or enhancements to existing products are released. We have in the past discovered defects and incompatibilities with customers hardware in certain of our products and may experience delays or loss of revenue to correct any new defects in the future. Errors in new products or releases after commencement of commercial shipments could result in loss of market share or failure to achieve market acceptance. Our products typically go through only one verification cycle prior to beginning volume production and distribution. As a result, our products may contain defects or flaws that are undetected prior to volume production and distribution. If these defects or flaws exist and are not detected prior to volume production and distribution, we may be required to reimburse customers for costs to repair or replace the affected products in the field. These costs could be significant and could adversely affect our business and operating results.
Risks Related to Our Partners
We sell our products to a small number of customers and our business could suffer by the loss of these customers.
We have only a limited number of customers and our sales are highly concentrated. Our sales process involves achieving key design wins with leading PC OEMs and major system builders and supporting the product design into high volume production with key CEMs, ODMs, motherboard and add-in board manufacturers. These design wins in turn influence the retail and system builder channel that is serviced by CEMs, ODMs, motherboard and add-in board manufacturers. Our distribution strategy is to work with a small number of leading independent CEMs, ODMs, motherboard manufacturers, add-in board manufacturers and stocking representatives, each of which has relationships with a broad range of system builders and leading PC OEMs. Currently, we sell a significant majority of our digital media processors directly to stocking representatives, CEMs, ODMs, motherboard and add-in board manufacturers, which then sell boards with our graphics processor to leading PC OEMs, retail outlets and to a large number of system builders. As a result, our business could be harmed by the loss of business from PC OEMs, CEMs, ODMs, motherboard and add-in board manufacturers. In addition, revenue from PC OEMs, CEMs, ODMs, motherboard and add-in board manufacturers that have directly or indirectly accounted for significant revenue in past periods, individually or as a group, may not continue, or may not reach or exceed historical levels in any future period.
Difficulties in collecting accounts receivable could result in significant charges against income, which could harm our business.
Our accounts receivable are highly concentrated and make us vulnerable to adverse changes in our customers' businesses and to downturns in the economy and the industry. We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. This allowance consists of an amount identified for specific customers and an amount based on overall estimated exposure. As of the of fiscal 2004, fiscal 2003 and fiscal 2002 our allowance for doubtful accounts represented 0.1%, 0.2% and 0.2% of revenue for each fiscal year, respectively. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required which could adversely affect our operating results. We may have to record additional reserves or write-offs in the future, which could harm our business.
We depend on foundries and independent contractors to manufacture our products and these third parties may not be able to satisfy our manufacturing requirements, which would harm our business.
We do not manufacture the semiconductor wafers used for our products and do not own or operate a wafer fabrication facility. Our products require wafers manufactured with state-of-the-art fabrication equipment and techniques. We utilize TSMC, IBM and UMC to produce our semiconductor wafers and utilize independent subcontractors to perform assembly, testing and packaging. Our wafer requirements represent a significant portion of the total production capacity at TSMC. We depend on these suppliers to allocate to us a portion of their manufacturing capacity sufficient to meet our needs, to produce products of acceptable quality and at acceptable manufacturing yields, and to deliver those products to us on a timely basis. These manufacturers may be unable to meet our near-term or long-term manufacturing requirements. We obtain manufacturing services on a purchase order basis. TSMC has no obligation to provide us with any specified minimum quantities of product. TSMC, IBM and UMC fabricate wafers for other companies, including certain of our competitors, and could choose to prioritize capacity for other users or reduce or eliminate deliveries to us on short notice. Because the lead-time needed to establish a strategic relationship with a new manufacturing partner could be several quarters, there is no readily available alternative source of supply for any specific product. We believe that long-term market acceptance for our products will depend on reliable relationships with TSMC, IBM, UMC and any other manufacturers used by us to ensure adequate product supply to respond to customer demand. Any difficulties like these would harm our business.
28
There can be no assurance that IBM will be able to produce wafers of acceptable quality and with acceptable manufacturing yield and deliver those wafers to us and our independent assembly and testing subcontractors on a timely basis. .
On March 26, 2003, we announced that we have formed a multi-year strategic alliance under which IBM will manufacture our next-generation GeForce GPUs. As part of the agreement, we will gain access to IBM s suite of foundry services and manufacturing technologies, including power-efficient copper wiring, and a roadmap that is designed to lead to 65nm (nanometer; a billionth of a meter) in the next several years, giving us valuable tools to advance our GPUs. IBM began manufacturing the next-generation GeForce graphics processor in July 2003 at IBM s plant in East Fishkill, New York.
During the development of our relationship with IBM, our manufacturing yields and product performance could suffer due to difficulties associated with adapting our technology and product design to the proprietary process technology and design rules of IBM. Any decrease in manufacturing yields could result in an increase in our per unit costs and force us to allocate our available product supply among our customers. This could potentially harm customer relationships as well as revenue and gross profit. We also face the risk of product recalls or product returns resulting from design or manufacturing defects that are not discovered during the manufacturing and testing process. In the event of a significant number of product returns due to a defect or recall, our business could suffer.
We are dependent on third parties for assembly, testing and packaging of our products.
Our digital media processors are assembled and tested by Siliconware Precision Industries Company Ltd., Amkor Technology, ChipPAC Incorporated and Advanced Semiconductor Engineering. We do not have long-term agreements with any of these subcontractors. As a result of our dependence on third-party subcontractors for assembly, testing and packaging of our products, we do not directly control product delivery schedules or product quality. Any product shortages or quality assurance problems could increase the costs of manufacture, assembly or testing of our products and could harm our business. Due to the amount of time typically required to qualify assemblers and testers, we could experience significant delays in the shipment of our products if we are required to find alternative third parties to assemble or test our products or components. Any delays in delivery of our products could harm our business.
We rely on third-party vendors to supply us tools for the development of our new products and we may be unable to obtain the tools necessary to develop these products .
In the design and development of new products and product enhancements, we rely on third-party software development tools. While we currently are not dependent on any one vendor for the supply of these tools, some or all of these tools may not be readily available in the future. For example, we have experienced delays in the introduction of products in the past as a result of the inability of then available software development tools to fully simulate the complex features and functionalities of our products. The design requirements necessary to meet consumer demands for more features and greater functionality from digital media processors in the future may exceed the capabilities of the software development tools available to us. If the software development tools we use become unavailable or fail to produce designs that meet consumer demands, our business could suffer.
Microsoft announced that it had entered into an agreement with one of our competitors to develop technology for future Xbox products and services. The impact that this announcement may have on our future revenue from the sale of Xbox processors to Microsoft is uncertain.
On August 14, 2003, Microsoft announced that it had entered into an agreement with one of our competitors to develop technology for future Xbox products and services. The impact that this announcement may have on our future revenue from the sale of Xbox processors to Microsoft is uncertain, but we do not anticipate that it will have a significant impact upon us for at least 18 24 months. Revenue from the sale of Xbox processors to Microsoft during fiscal 2002, fiscal 2003 and fiscal 2004 accounted for 9%, 23% and 15%, respectively, of our total revenue.
29
We may not be able to realize the potential financial or strategic benefits of business acquisitions and that could hurt our ability to grow our business and sell our products.
In the past we have acquired and invested in other businesses that offered products, services and technologies that we believed would help expand or enhance our products and services or help expand our distribution channels. For any previous or future acquisition or investment, the following risks could impair our ability to grow our business and develop new products and, ultimately, could impair our ability to sell our products:
difficulty in combining the technology, operations or workforce of the acquired business;
disruption of our ongoing businesses;
difficulty in realizing the potential financial or strategic benefits of the transaction;
difficulty in maintaining uniform standards, controls, procedures and policies; and
possible impairment of relationships with employees and customers as a result of any integration of new businesses and management personnel.
In addition, the consideration for any future acquisition could be paid in cash, shares of our common stock, or a combination of cash and common stock. If the consideration is paid with our common stock, existing stockholders would be further diluted.
Provisions in our certificate of incorporation, our bylaws and our agreement with Microsoft could delay or prevent a change in control.
Our certificate of incorporation and bylaws contain provisions that could make it more difficult for a third party to acquire a majority of our outstanding voting stock. These provisions include the following:
the ability of the board of directors to create and issue preferred stock without prior stockholder approval;
the prohibition of stockholder action by written consent;
a classified board of directors; and
advance notice requirements for director nominations and stockholder proposals.
On March 5, 2000, we entered into an agreement with Microsoft in which we agreed to develop and sell graphics chips and to license certain technology to Microsoft and its licensees for use in the Xbox. In the event that an individual or corporation makes an offer to purchase shares equal to or greater than 30% of the outstanding shares of our common stock, Microsoft has first and last rights of refusal to purchase the stock. The provision could also delay or prevent a change in control of NVIDIA.
Risks Related to Our Competition
The 3D graphics, platform processor and handheld industries are highly competitive and we may be unable to compete.
The market for GPUs, MCPs and UMPs for PCs and handhelds in which we compete is intensely competitive and is characterized by rapid technological change, evolving industry standards and declining average selling prices. We believe that the principal competitive factors in this market are performance, breadth of product offerings, access to customers and distribution channels, backward-forward software support, conformity to industry standard APIs, manufacturing capabilities, price of digital media processors and total system costs of add-in boards and motherboards. We expect competition to increase both from existing competitors and new market entrants with products that may be less costly than ours, or may provide better performance or additional features not provided by our products, which could harm our business.
30
Our primary source of competition is from companies that provide or intend to provide GPU and MCP solutions for the PC and handheld segments. Our competitors include the following:
suppliers of MCPs that incorporate 3D graphics functionality as part of their existing solutions, such as ATI, Intel, Silicon Integrated Systems and VIA;
suppliers of desktop standalone GPUs that incorporate 3D graphics functionality as part of their existing solutions, such as ATI, Creative Technology, Matrox Electronics Systems Ltd. and XGI Technology, Inc.,;
suppliers of notebook standalone GPUs that incorporate 3D graphics functionality as part of their existing solutions, such as ATI, Silicon Motion. and the joint venture of a division of SONICblue Incorporated (formerly S3 Incorporated) and VIA; and
suppliers of UMPs for handheld devices that incorporate advanced graphics functionality as part of their existing solutions, such as ATI and Seiko-Epson.
If and to the extent we offer products outside of the personal computer, consumer electronics and handheld segments, we may face competition from some of our existing competitors as well as from companies with which we currently do not compete. We cannot accurately predict if we will compete successfully in any new markets we may enter.
Our failure to achieve one or more design wins would harm our business.
Our future success will depend in large part on achieving design wins, which entails having our existing and future products chosen for hardware components or subassemblies designed by PC OEMs, ODMs, and add-in board and motherboard manufacturers. Our add-in board and motherboard manufacturers and major OEM and ODM customers typically introduce new system configurations as often as twice per year, generally based on spring and fall design cycles. Accordingly, our existing products must have competitive performance levels or we must timely introduce new products with such performance characteristics in order to be included in new system configurations. Our failure to achieve one or more design wins would harm our business. The process of being qualified for inclusion in an OEM s product can be lengthy and could cause us to miss a cycle in the demand of end users for a particular product feature, which also could harm our business.
Our ability to achieve design wins also depends in part on our ability to identify and ensure compliance with evolving industry standards. Unanticipated changes in industry standards could render our products incompatible with products developed by major hardware manufacturers and software developers, including Intel and Microsoft. This would require us to invest significant time and resources to redesign our products to ensure compliance with relevant standards. If our products are not in compliance with prevailing industry standards for a significant period of time, our ability to achieve design wins could suffer.
Risks Related to Market Conditions
We are subject to risks associated with international operations which may harm our business.
Our reliance on foreign third-party manufacturing, assembly, testing and packaging operations subjects us to a number of risks associated with conducting business outside of the United States, including the following:
unexpected changes in, or impositions of, legislative or regulatory requirements;
delays resulting from difficulty in obtaining export licenses for certain technology, tariffs, quotas and other trade barriers and restrictions;
longer payment cycles;
imposition of additional taxes and penalties;
the burdens of complying with a variety of foreign laws; and
other factors beyond our control, including terrorism and war, which may delay the shipment of our products.
31
We also are subject to general political risks in connection with our international trade relationships. In addition, the laws of certain foreign countries in which our products are or may be manufactured or sold, including various countries in Asia, may not protect our products or intellectual property rights to the same extent as do the laws of the United States. This makes the possibility of piracy of our technology and products more likely.
Currently, all of our arrangements with third-party manufacturers provide for pricing and payment in U.S. dollars, and to date we have not engaged in any currency hedging activities, although we may do so in the future. Fluctuations in currency exchange rates could harm our business in the future.
Our business is cyclical in nature and an industry downturn could harm our business.
Our business is directly affected by market conditions in the highly cyclical semiconductor industry, including alternating periods of overcapacity and capacity constraints, variations in manufacturing costs and yields, significant expenditures for capital equipment and product development and rapid technological change. If we are unable to respond to changes in our industry, which can be unpredictable and rapid, in an efficient and timely manner, our operating results could suffer. In particular, from time to time, the semiconductor industry has experienced significant and sometimes prolonged downturns characterized by diminished product demand and accelerated erosion of average selling prices. If we cannot take appropriate actions such as reducing our costs to sufficiently offset declines in demand, our revenues and earnings will suffer during downturns.
Our products may not continue to be accepted by the PC and consumer electronics segments.
Our success will depend in part upon continued broad adoption of our digital media processors for 3D graphics in PC and consumer electronics applications. The market for digital media processors has been characterized by unpredictable and sometimes rapid shifts in the popularity of products, often caused by the publication of competitive industry benchmark results, changes in dynamic random memory devices pricing and other changes in the total system cost of add-in boards, as well as by severe price competition and by frequent new technology and product introductions. Only a small number of products have achieved broad market acceptance and such market acceptance, if achieved, is difficult to sustain due to intense competition. Since the PC segment is our core business, our business would suffer if for any reason our current or future digital media processors do not continue to achieve widespread acceptance in the PC segment. If we are unable to complete the timely development of products or if we were unable to successfully and cost-effectively manufacture and deliver products that meet the requirements of the PC segment, our business would be harmed.
We are dependent on the PC market and the rate of its growth has and may in the future have a negative impact on our business.
During fiscal 2004, we derived the majority of our revenue from the sale of products for use in the desktop and notebook PC segments, including professional workstations . We expect to continue to derive most of our revenue from the sale or license of products for use in the desktop and notebook PC segments in the next several years. A reduction in sales of PCs, or a reduction in the growth rate of PC sales, will reduce demand for our products. Moreover, changes in demand could be large and sudden. Since PC manufacturers often build inventories during periods of anticipated growth, they may be left with excess inventories if growth slows or if they have incorrectly forecast product transitions. In these cases, PC manufacturers may abruptly suspend substantially all purchases of additional inventory from suppliers like us until the excess inventory has been absorbed.
32
Hostilities involving the United States and/or terrorist attacks could harm our business.
The financial, political, economic and other uncertainties following the terrorist attacks upon the United States led to a weakening of the global economy. Subsequent terrorist acts and/or the threat of future outbreak or continued escalation of hostilities involving the United States or other countries could adversely affect the growth rate of our revenue and have an adverse effect on our business, financial condition or results of operations. In addition, any escalation in these events or similar future events may disrupt our operations or those of our customers, distributors and suppliers, which could adversely affect our business, financial condition or results of operations.
Political instability in Taiwan and in The People s Republic of China could harm our business.
Because of our reliance on TSMC and UMC, our business may be harmed by political instability in Taiwan, including the worsening of the strained relations between The People s Republic of China and Taiwan, or if relations between the U.S. and The People s Republic of China are strained due to foreign relations events. Furthermore, any substantial disruption in our suppliers operations, either as a result of a natural disaster, political unrest, economic instability, acts of terrorism or war, equipment failure or other cause, could harm our business.
Our stock price may continue to experience significant short-term fluctuations.
The price of our common stock has fluctuated greatly. These price fluctuations have been rapid and severe. The price of our common stock may continue to fluctuate greatly in the future due to factors that are non-company specific, such as the decline in the U.S. economy, acts of terror against the U.S., war or due to a variety of company specific factors, including quarter to quarter variations in our operating results, shortfalls in revenue or earnings from levels expected by securities analysts and the other factors discussed above in these risk factors. In the past, following periods of volatility in the market price of a company s stock, securities class action litigation had been initiated against the issuing company.
We are exposed to fluctuations in the market values of our portfolio investments and in interest rates.
We invest in a variety of financial instruments, consisting principally of investments in commercial paper, money market funds and highly liquid debt securities of corporations, municipalities and the U.S. Government and its agencies. These investments are denominated in U.S. dollars.
We account for our investment instruments in accordance with SFAS No. 115. All of the cash equivalents and marketable securities are treated as "available-for-sale" under SFAS No. 115. Investments in both fixed rate and floating rate interest earning instruments carry a degree of interest rate risk. Fixed rate securities may have their market value adversely impacted due to a rise in interest rates, while floating rate securities may produce less income than expected if interest rates fall. Due in part to these factors, our future investment income may fall short of expectations due to changes in interest rates or we may suffer losses in principal if forced to sell securities that decline in market value due to changes in interest rates. However, because our debt securities are classified as "available-for-sale", no gains or losses are recognized due to changes in interest rates unless such securities are sold prior to maturity.
Risks Related to Intellectual Property, Litigation and Government Action
Our industry is characterized by vigorous protection and pursuit of intellectual property rights or positions that could result in substantial costs to us.
The semiconductor industry is characterized by vigorous protection and pursuit of intellectual property rights and positions, which has resulted in protracted and expensive litigation. The digital media processor industry in particular has been characterized recently by the aggressive pursuit of intellectual property positions, and we expect our competitors to continue to pursue aggressive intellectual property positions. In addition, from time to time we receive notices or are included in legal actions alleging that we have infringed patents or other intellectual property rights owned by third parties. We expect that, as the number of issued hardware and software patents increases, and as competition in our product lines intensifies, the volume of intellectual property infringement claims may increase. If infringement claims are made against us, we may seek licenses under the claimants patents or other intellectual property rights. However, licenses may not be offered at all or on terms acceptable to us, particularly by competitors. The failure to obtain a license from a third party for technology used by us could cause us to incur substantial liabilities and to suspend the manufacture of and sale of one or more products, which could reduce our revenues and harm our business. Furthermore, we may initiate claims or litigation against third parties for infringement of our proprietary rights or to establish the validity of our proprietary rights. We have agreed to indemnify certain customers for certain claims of infringement arising out of sale of our products.
33
Our ability to compete will be harmed if we are unable to adequately protect our intellectual property.
We rely primarily on a combination of patents, trademarks, trade secrets, employee and third-party nondisclosure agreements and licensing arrangements to protect our intellectual property in the United States and internationally. We have numerous patents issued and pending in the United States and in foreign countries. Our patents and pending patent applications relate to technology used by us in connection with our products, including our digital media processors. We also rely on international treaties and organizations and foreign laws to protect our intellectual property. We continuously assess whether and where to seek formal protection for particular innovations and technologies based on such factors as: the commercial significance of our operations and our competitors operations in particular countries and regions; the location in which our products are manufactured; our strategic technology or product directions in different countries; and the degree to which intellectual property laws exist and are meaningfully enforced in different jurisdictions.
Our pending patent applications and any future applications may not be approved. In addition, any issued patents may not provide us with competitive advantages or may be challenged by third parties. The enforcement of patents by others may harm our ability to conduct our business. Others may independently develop substantially equivalent intellectual property or otherwise gain access to our trade secrets or intellectual property. Our failure to effectively protect our intellectual property could harm our business. We have licensed technology from third parties for incorporation in our digital media processors, and expect to continue to enter into license agreements for future products. These licenses may result in royalty payments to third parties, the cross licensing of technology by us or payment of other consideration. If these arrangements are not concluded on commercially reasonable terms, our business could suffer.
Litigation against us or our customers concerning infringement would likely result in significant expense to us and divert the efforts of our technical and management personnel.
We are currently subject to claims of patent infringement, and we may be subject to patent infringement claims or suits brought by other parties in the future. These claims and any future lawsuits could divert our resources and result in the payment of substantial damages.
Future actions by the IRS or SEC or other governmental or regulatory agencies could harm our business.
As of January 25, 2004, the Internal Revenue Service, or IRS, closed our federal income tax return exam for our fiscal years ended January 28, 2001 and January 27, 2002. The results of our exam were submitted to the Joint Committee on Taxation, or the Joint Committee, for review.
With our exam closed, we recorded the tax benefit of the settlement in our financial statements for the fiscal year ended January 25, 2004 because we had certainty as to the outcome of certain tax contingencies for which we had established liabilities. However, the failure of the Joint Committee to agree with our settlement may result in a material adverse impact on the results of our operations in the period in which the matter is either resolved or in which an unfavorable outcome becomes probable and reasonably estimable. Please refer to Part II, Item 7 "Results of Operations - Income Taxes" and Note 14 of our Notes to the Consolidated Financial Statements for further information.
We are subject to changes in financial accounting standards, which may affect our reported financial results or the way we conduct business.
The Financial Accounting Standards Board and various federal legislative proposals have proposed changes to Accounting Principles Generally Accepted in the United States, or U.S. GAAP, that may require us to recognize compensation expense for our employee stock options. We currently us the intrinsic value method to measure compensation expense for stock-based awards to our employees. Under this method, we generally do no recognize compensation expense for an employee stock option when the exercise price of the stock option is equal to the fair market value on the date of grant. If any change to U.S. GAAP is adopted that requires us to recognize compensation expense for our employee stock options, our reported results of operations may be adversely affected.
34
ITEM 8. CONSOLIDATED FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
The information required by this item is set forth in our consolidated financial statements and notes thereto included in this Annual Report.