United States District Court for the Central District of
California, for infringement of US Patent Nos. 6,109,892 and 6,114,785. The
underlying case is Sunonwealth v. Adda Corporation, et al, filed in the United
States District Court for the Central District on October 19, 2000. Both cases
have been consolidated. The patents are for a positioning device for a sensor
element of a miniature fan. The Company purchased these fans from Adda. Adda
has agreed to defend the Company and to pay any judgment rendered against the
Company as well as the cost of any settlement to the extent that the Company's
liability in such settlement arises from patent infringement resulting from its
purchase of products from Adda.
On August 3, 2001 the Court of Appeals for the Federal Circuit issued its
decision in a patent infringement action originally brought in 1998 by S3
Incorporated (now SONICblue Incorporated). The decision vacated the district
court's summary judgment in favor of the Company and dismissal of the action
relative to certain disputed claims and remanded the matter back to the
district court. Under a previous settlement agreement with S3, the Company
agreed to pay up to $2.0 million if S3's appeal of the district court judgment
was decided in favor of S3. The Company made a payment of $1.9 million to S3 in
August 2001 to fully satisfy its obligation under the settlement.
11
NVIDIA CORPORATION AND SUBSIDIARIES
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS--(Continued)
(Unaudited)
(13) Stockholders' Equity and Stock Split
In August 2001, the Company's Board of Directors approved a two-for-one
stock split of the Company's common stock for stockholders of record on August
28, 2001, to be effected in the form of a 100% stock dividend. The transfer
agent distributed the shares resulting from the split on September 17, 2001.
All share and per-share numbers contained herein reflect this stock split.
12
ITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS
OF OPERATIONS
The following discussion contains forward-looking statements within the
meaning of Section 27A of the Securities Act of 1933 and Section 21E of the
Securities Exchange Act of 1934, which are subject to the "safe harbor" created
by those sections. These forward-looking statements include but are not limited
to: statements related to industry trends and future growth in the markets for
3D graphics processors; our product development efforts; the timing of our
introduction of new products; industry and consumer acceptance of our products;
and future profitability. These forward-looking statements involve risks and
uncertainties that could cause our actual results to differ materially from
those in the forward-looking statements. We undertake no obligation to publicly
release any revisions to the forward-looking statements or reflect events or
circumstances after the date of this document. The "Business Risks" section,
among other things, should be considered in evaluating our prospects and future
financial performance.
Overview
We design, develop and market graphics processors and related software for
personal computers, or PCs, workstations and digital entertainment platforms.
We provide an architecturally compatible "top-to-bottom" family of
award-winning performance 3D graphics processors and graphics processing units,
or GPUs, that set the standard for performance, quality and features for a
broad range of desktop PCs, from professional workstations to low-cost PCs and
mobile PCs, from performance laptops to thin-and-light notebooks. Our 3D
graphics processors are used for a wide variety of applications, including
games, digital image editing, business productivity, the Internet and
industrial design. Our graphics processors were the first to incorporate a
128-bit multi-texturing graphics architecture designed to deliver to users of
our products a highly immersive, interactive 3D experience with compelling
visual quality, realistic imagery and motion, stunning effects and complex
object and scene interaction at real-time frame rates. The NVIDIA TNT2 family
of graphics processors delivers high performance 3D and 2D graphics at
affordable prices, making them the graphics hardware of choice for a wide range
of applications for both consumer and commercial use. Our graphics processors
are designed to be architecturally compatible backward and forward between
generations, giving our original equipment manufacturers, or OEMs, customers
and end users a low cost of ownership. We are recognized for developing the
world's first GPU, the GeForce 256, which incorporates independent hardware
transform and lighting processing units along with a complete rendering
pipeline into a single-chip architecture. The GeForce3, GeForce2 and Quadro2
family of desktop and laptop GPUs are the first to incorporate pixel and vertex
shaders, enabling the creation of interactive, cinematic-quality images through
the use of highly programmable processing elements. The nForce and Xbox
integrated graphics processor (IGP) and media and communications processor
(MCP) are the industry's first highly-integrated platform processors to
incorporate a comprehensive set of multimedia capabilities, such as 2D, 3D,
DVD, HDTV, Dolby Digital audio playback and fast broadband and networking
communications. Our entire product family provides superior processing and
rendering power at competitive prices and are architected to deliver the
maximum performance from industry standards such as Microsoft's Direct3D
Application Programming Interface (API) and Silicon Graphics, Inc.'s (SGI's)
OpenGL API on Windows operating systems and Linux platforms.
We recognize revenue from product sales to customers when a contract is in
place, the price is determined, shipment is made and collectability is
reasonably assured. Our policy on sales to distributors and stocking
representatives is to defer recognition of sales and related cost of sales
until the distributors and representatives resell the product. Royalty revenue
is recognized upon shipment of product by the licensee to its customers. We
believe that the software sold with our products is incidental to the product
as a whole.
Currently, all of our product sales and our arrangements with third-party
manufacturers provide for pricing and payment in U.S. dollars. We have not
engaged in any foreign currency hedging activities, although we may do so in
the future. Since we have no other product line, our business would suffer if
for any reason our graphics processors do not achieve widespread acceptance in
the PC market.
13
A majority of our sales have been to a limited number of customers and sales
are highly concentrated. We sell graphics processors to add-in board and
motherboard manufacturers and contract equipment manufacturers, or CEMs. These
manufacturers incorporate our processors into the boards they sell to PC OEMs,
retail outlets and system integrators. The average selling prices for our
products, as well as our customers' products, vary by distribution channel. Our
four largest customers accounted for approximately 57% of revenues for the
third quarter of fiscal 2002 and 52% of revenues for the first nine months of
fiscal 2002. The same four customers accounted for approximately 35% of
revenues for the third quarter of fiscal 2001 and 32% of revenues for the first
nine months of fiscal 2001. The number of potential customers for our products
is limited, and we expect sales to be concentrated to a few major customers for
the foreseeable future.
As markets for our 3D graphics processors develop and competition increases,
we anticipate that product life cycles in the high end will remain short and
average selling prices will continue to decline. In particular, average selling
prices and gross margins are expected to decline as each product matures. Our
add-in board and motherboard manufacturers and major OEM customers typically
introduce new system configurations as often as twice per year for the high
end, typically based on spring and fall design cycles. In order to maintain
average selling prices and gross margins, our existing and new products must
achieve competitive performance levels to be designed into new system
configurations and must be produced at low costs, in sufficient volumes and on
a timely basis, especially with respect to our new products. We currently
utilize Taiwan Semiconductor Manufacturing Company, or TSMC, to produce
semiconductor wafers, and utilize independent contractors to perform assembly,
test and packaging.
On April 18, 2001, we completed the purchase of certain assets of 3dfx
Interactive, Inc., including patents and patent applications. Under the terms
of the Asset Purchase Agreement, the cash consideration due at the closing was
$70.0 million, less $15.0 million that was loaned to 3dfx pursuant to a Credit
Agreement dated December 15, 2000, between us and 3dfx. Pursuant to the Asset
Purchase Agreement, following the closing, we are to pay 3dfx additional
consideration in the form of stock equal to two million shares of NVIDIA common
stock, subject to 3dfx satisfying certain conditions. In addition, following
the closing, we and 3dfx filed a stipulation to dismiss with prejudice the
patent litigation between us. The litigation was dismissed on April 26, 2001,
pursuant to a judicial order. The transaction is accounted for under the
purchase method of accounting. See Note 3 of Notes to Condensed Consolidated
Financial Statements.
14
Results of Operations
The following table sets forth, for the periods indicated, certain items in
our condensed consolidated statements of income expressed as a percentage of
total revenue.
Three Months Ended Nine Months Ended
---------------------- ----------------------
October 28, October 29, October 28, October 29,
2000 2000 2001 2000
----------- ----------- ----------- -----------
Revenue.............................................. 100.0% 100.0% 100.0% 100.0%
Cost of revenue...................................... 62.6 62.9 61.7 62.7
----- ----- ----- -----
Gross profit......................................... 37.4 37.1 38.3 37.3
Operating expenses:..................................
Research and development.......................... 12.0 11.1 12.6 11.6
Sales, general and administrative................. 6.7 7.5 7.2 8.0
Amortization of goodwill and purchased intangible
assets.......................................... 1.1 -- 1.0 --
Acquisition related charges....................... -- -- 1.2 --
Discontinued use of property...................... 0.9 -- 0.4 --
----- ----- ----- -----
Total operating expenses...................... 20.7 18.6 22.4 19.6
----- ----- ----- -----
Operating income.............................. 16.7 18.5 15.9 17.7
Interest and other income, net....................... 0.5 2.3 1.1 1.9
----- ----- ----- -----
Income before income tax expense..................... 17.2 20.8 17.0 19.6
Income tax expense................................... 5.2 6.7 5.1 6.3
----- ----- ----- -----
Net income.................................... 12.0% 14.1% 11.9% 13.3%
===== ===== ===== =====
Three months and nine months ended October 28, 2001, and October 29, 2000
Revenue
Revenue increased 87% to $370.2 million in the third quarter ended October
28, 2001 from $198.2 million in the third quarter ended October 29, 2000.
Revenue of $871.4 million for the first nine months of fiscal 2002 grew 69%
over the first nine months of fiscal 2001. The growth was primarily the result
of increased sales of our graphics processors and the strong demand for new
products at higher unit average selling prices. Revenue from sales outside of
the United States accounted for 77% of total revenue for the third quarter
ended October 28, 2001 and 85% of total revenue for the first nine months of
fiscal 2002. Revenue from sales outside of the United States represented 93% of
total revenue in the third quarter ended October 29, 2000 and 90% in the first
nine months of fiscal 2001. Geographic sales are based on bill to address and
this decrease in revenue from sales outside of the United States is primarily
attributable to sales of the graphic processor used in the Microsoft Xbox
product billed to Microsoft in the United States. Revenue by geographical
region is allocated to individual countries based on the location to which the
products are initially billed. The portion of revenue derived from foreign
contract equipment manufacturers, or CEMs, and add-in board and motherboard
manufacturers that are attributable to end customers in the United States is
not separately disclosed. Although we achieved substantial growth in product
revenue for the first nine months of 2002 from the same period in fiscal 2001,
we do not expect to sustain this rate of growth in future periods. In addition,
we expect that the average selling prices of our products will decline over the
lives of the products. The declines in average selling prices of 3D graphics
processors in general may also accelerate as the market develops and
competition increases.
Gross Profit
Gross profit consists of total revenue, net of allowances, less cost of
revenue. Cost of revenue consists primarily of the costs of semiconductors
purchased from contract manufacturers (including assembly, test and packaging),
manufacturing support costs (labor and overhead associated with such
purchases), inventory
15
provisions and shipping costs. Our gross profit margin can vary in any period
depending on the mix of types of graphics processors sold. Gross profit
increased 88% from the third quarter of fiscal 2001 to the same period of
fiscal 2002, and 73% from the first nine months of fiscal 2001 to the same
period of fiscal 2002, primarily due to significant increases in unit shipments
and the favorable impact of the higher margin GeForce graphics processors,
partially offset by increased sales of the lower margin Xbox graphic
processors. Although we achieved substantial growth in gross profit and margin
from the first nine months of fiscal 2001 to the same period of fiscal 2002, we
do not expect to sustain these rates of growth in future periods.
Operating Expenses
Research and Development. Research and development expenses consist of
salaries and benefits, cost of development tools and software, costs of
prototypes of new products and consultant costs. Research and development
expenses increased by 102% from the third quarter of fiscal 2001 to the same
period of fiscal 2002, and 82% from the first nine months of fiscal 2001 to the
first nine months of fiscal 2002, primarily due to new employees from 3dfx, the
move to new headquarters, the addition of personnel and related engineering
costs to support our next generation products, such as depreciation charges
incurred on capital expenditures and software license and maintenance fees. We
anticipate that we will continue to devote substantial resources to research
and development, and we expect these expenses to increase in absolute dollars
in the foreseeable future due to the increased complexity and the greater
number of products under development. Research and development expenses are
likely to fluctuate from time to time to the extent we make periodic
incremental investments in research and development and these investments may
be independent of our level of revenues.
Sales, General and Administrative. Sales, general and administrative
expenses consist primarily of salaries, commissions and bonuses, promotional
tradeshow and advertising expenses, travel and entertainment expenses and legal
and accounting expenses. Sales, general and administrative expenses increased
by 67% from the third quarter of fiscal 2001 to the same period of fiscal 2002,
and 52% from the first nine months of fiscal 2001 to the first nine months of
fiscal 2002, primarily due to costs associated with additional personnel and
commissions, bonuses on sales of the GeForce families of graphic processors,
the move to new headquarters, and a donation to the American Red Cross. We
expect sales and marketing expenses to continue to increase in absolute dollars
as we continue to expand our operations and our sales. General and
administrative expenses are also likely to increase in absolute dollars as we
continue to expand our operations. However, we do not expect significant
changes in these expenses as a percentage of revenue in future periods.
Discontinued use of property. Discontinued use of property consists of
write-offs of a portion of our previous office space. Since we relocated in
June 2001, we have been unable to secure a subtenant for our previous office
space due to the decrease in demand for commercial rental space as a result of
the declining economy. We have completed write-offs consisting of the remaining
cost related to the preexisting lease, including rental payments, capitalized
leasehold improvements, and furniture and fixtures.
Amortization of goodwill and purchased intangible assets. Amortization of
goodwill and purchased intangible assets consist primarily of goodwill and
intangible assets from the asset purchase of 3dfx. The initial allocation of
the purchase price was to (a) workforce in place, amortized over two years, (b)
patents and trademarks, amortized over five years and (c) goodwill, amortized
over five years. The final allocation will depend upon the additional
consideration given to 3dfx, subject to 3dfx satisfying certain conditions.
Consequently, the actual allocation of the purchase price could differ from
that presented in Note 3 of Notes to Condensed Consolidated Financial
Statements.
Acquisition related charges. Acquisition related charges are attributable to
expenses related to the acquisition of 3dfx. These charges primarily consisted
of bonuses for employees.
16
Interest and Other Income (Expense), Net
Interest expense increased for the third quarter and the first nine months
of fiscal 2002 compared to the same periods in fiscal 2001 due to the issuance
of $300.0 million of convertible debt in October 2000. Interest income
increased 12% and 103% during the third quarter and the first nine months of
fiscal 2002 from the same periods in fiscal 2001, respectively, due to higher
average cash balances as a result of the $200.0 million advance received from
Microsoft in connection with our agreement with Microsoft and the receipt of
$387.4 million from our combined convertible debt and common stock offerings
that closed in October 2000.
Income Taxes
Income taxes as a percentage of pretax income was 30% for the first nine
months of fiscal 2002 and 32% for the same period in fiscal 2001. Foreign
income which is taxed at rates lower than the United States statutory rates
contributed to the lower tax rate for the first nine months of fiscal 2002.
Amortization of Stock-Based Compensation
With respect to stock options granted to employees, we recorded deferred
compensation of $4.3 million in 1997 and $361,000 in the one month ended
January 31, 1998. These amounts are being amortized over the vesting period of
the individual options, generally four years. We amortized approximately $6,000
in the first six months of fiscal 2002 and $103,000 in the first nine months of
fiscal 2001. Deferred compensation was fully amortized by the first half of
fiscal 2002.
Liquidity and Capital Resources
As of October 28, 2001, we had $398.5 million in cash and cash equivalents,
a decrease of $275.8 million from the end of fiscal 2001. We historically have
held our cash balances in cash equivalents such as money market funds or as
cash. In August 2001, we began to invest in marketable securities. We place our
marketable securities investments with high-quality financial institutions and
limit the amount of exposure with any one financial institution and investment
instrument. We had $360.7 million of non-cancelable manufacturing commitments
outstanding at October 28, 2001.
Operating activities generated cash of $113.3 million during the first nine
months of fiscal 2002 and $52.4 million during the first nine months of fiscal
2001. The increase from the first nine months of fiscal 2001 to the same period
in fiscal 2002 was due to a substantial increase in net income and changes in
operating assets and liabilities. Our accounts receivable are highly
concentrated. At October 28, 2001, three large customers accounted for
approximately 50% of accounts receivable. We may be required to write off bad
debts in the future, which could harm our business.
Our investing activities have consisted primarily of the purchase of certain
assets from various businesses, investments in marketable securities, and
purchases of property and equipment and leasehold improvements for our new
facility under construction. We incurred acquisition costs of $64.1 million
during the first nine months of fiscal 2002, primarily due to the closing of
3dfx asset purchase. There were no acquisitions during the same period a year
ago. We began to purchase marketable securities equal to approximately $316.8
million during the first nine months of fiscal 2002. Our capital expenditures
increased from $21.6 million in the first nine months of fiscal 2001 to $76.8
million in the first nine months of fiscal 2002. The increase was primarily
attributable to the construction of our new facility as well as for purchases
of computer and emulation equipment to support increased research and
development activities. We expect capital expenditures to increase as we
further expand research and development initiatives and as our employee base
grows. The timing and amount of future capital expenditures will depend
primarily on our future growth. We expect to spend approximately $90.0 million
for capital expenditures in fiscal 2002, primarily for software licenses,
emulation equipment, purchase of computer and engineering workstations, future
phases of enterprise resource planning system implementation and tenant and
leasehold improvements in our new headquarters facility.
17
In April 2000, we entered into leases for our new headquarters complex in
Santa Clara, California. Our new complex comprises four buildings, representing
approximately 500,000 total square feet. The first phase of two buildings
consisting of approximately 250,000 square feet was completed in June 2001, and
the second phase of one building consisting of approximately 125,000 square
feet was completed in July 2001. Restricted cash deposits of $17.5 million were
released upon completion of the first and second phase. We expect the last
phase consisting of approximately 125,000 square feet to be completed in March
2002. The leases expire in 2012 and include two seven-year renewals at our
option. The future minimum lease payments under these operating leases total
approximately $221.4 million over the terms of the leases.
Financing activities provided cash of $51.2 million in the first nine months
of fiscal 2002 compared to $602.5 million in the same period of fiscal 2001. On
March 5, 2000, we entered into an agreement with Microsoft in which we agreed
to develop and sell graphics chips and to license certain technology to
Microsoft and its licensees for use in the Xbox product then under development
by Microsoft. In April 2000, Microsoft paid us $200.0 million as an advance
against graphics chip purchases. Microsoft may terminate the agreement at any
time. If termination occurs prior to offset in full of the advance payments, we
would be required to return to Microsoft up to $100.0 million of the prepayment
and to convert the remainder into shares of our preferred stock a 30% premium
to the 30-day average trading price of our common stock preceding Microsoft's
termination of the agreement. In July 2001, we began to ship production units
to Microsoft, and the $200.0 million advance was drawn down by $56.8 million in
relation to the shipments made to date. On November 15, 2001, Microsoft
released the Xbox to retailers in the U.S.
We believe that our existing cash balances and anticipated cash flows from
operations will be sufficient to meet our operating and capital requirements
for at least the next 12 months. However, there is no assurance that we will
not need to raise additional equity or debt financing within this time frame.
Additional financing may not be available on favorable terms or at all and may
be dilutive to our then-current stockholders. We also may require additional
capital for other purposes not presently contemplated. If we are unable to
obtain sufficient capital, we could be required to curtail capital equipment
purchases or research and development expenditures, which could harm our
business.
ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Interest Rate Risk
We invest in a variety of financial instruments, consisting principally of
investments in commercial paper, money market funds and highly liquid debt
securities of corporations, municipalities and the U.S. Government. These
investments are denominated in U.S. dollars.
We account for our investment instruments in accordance with SFAS 115. All
of the cash equivalents and marketable securities are treated as
"available-for-sale" under SFAS 115. Investments in both fixed rate and
floating rate interest earning instruments carry a degree of interest rate
risk. Fixed rate securities may have their market value adversely impacted due
to a rise in interest rates, while floating rate securities may produce less
income than expected if interest rates fall. Due in part to these factors, our
future investment income may fall short of expectations due to changes in
interest rates or we may suffer losses in principal if forced to sell
securities that decline in market value due to changes in interest rates.
However, we reduce our interest rate risk by investing cash primarily in
instruments with short maturities. Our exposure to changes in short term
interest rates on our portfolio of marketable securities is insignificant as of
October 28, 2001 given that the average holding periods until maturity of our
cash equivalents and marketable securities were approximately 14 and 616 days,
respectively. The principal amount and related weighted-average interest rates
for our investment portfolio were $236.9 million and 2.7% for the cash
equivalents, and $317.7 million and 3.5% for the marketable securities as of
October 28, 2001.
Our convertible subordinated notes due 2007 are at a fixed interest rate of
4 3/4% and are not subject to interest rate fluctuations.
18
Exchange Rate Risk
We consider our exposure to foreign exchange rate fluctuations to be
minimal. Currently, sales and arrangements with third-party manufacturers
provide for pricing and payment in U.S. dollars, and therefore are not subject
to exchange rate fluctuations. To date, we have not engaged in any currency
hedging activities, although we may do so in the future. Fluctuations in
currency exchange rates could harm our business in the future.
Business Risks
In addition to the risks discussed in "Management's Discussion and Analysis
of Financial Condition and Results of Operations," our business is subject to
the risks set forth below.
Our operating results are unpredictable and may fluctuate.
Many of our revenue components fluctuate and are difficult to predict, and
our operating expenses are largely independent of revenue in any particular
period. It is therefore difficult for us to accurately forecast revenue and
profits or losses. As a result, it is possible that in some quarters our
operating results could be below the expectations of securities analysts and
investors, which could cause the trading price of our common stock to decline,
perhaps substantially. We believe that our quarterly and annual results of
operations will be affected by a variety of factors that could adversely affect
our revenue, gross profit and results of operations.
Factors that have affected our results of operations in the past, and that
could affect our results of operations in the future, include the following:
. demand and market acceptance for our products and/or our customers'
products;
. the successful development and volume production of next-generation
products;
. new product announcements or product introductions by our competitors;
. our ability to introduce new products in accordance with OEM design
requirements and design cycles;
. changes in the timing of product orders due to unexpected delays in the
introduction of our customers' products;
. fluctuations in the availability of manufacturing capacity or
manufacturing yields;
. declines in spending by corporations and consumers related to perceptions
regarding an economic downturn in the U.S. and international economies;
. competitive pressures resulting in lower than expected average selling
prices;
. rates of return in excess of that forecasted or expected due to quality
issues;
. the rescheduling of shipments or cancellation of customer orders;
. the loss of a key customer or the termination of a strategic relationship;
. seasonal fluctuations associated with the PC market;
. substantial disruption in our or our suppliers' operations, either as a
result of a natural disaster, equipment failure, terrorism or other cause;
. supply constraints for and changes in the cost of the other components
incorporated into our customers' products, including memory devices;
. our ability to reduce the manufacturing costs of our products;
. legal and other costs related to defending intellectual property;
19
. bad debt write-offs;
. costs associated with the repair and replacement of defective products;
. unexpected inventory write-downs; and
. introductions of enabling technologies to keep pace with faster
generations of processors and controllers.
Any one or more of the factors discussed above could prevent us from
achieving our expected future revenue or net income.
Because most operating expenses are relatively fixed in the short term, we
may be unable to adjust spending sufficiently in a timely manner to compensate
for any unexpected sales shortfall. We may be required to reduce prices in
response to competition or to pursue new market opportunities. If new
competitors, technological advances by existing competitors or other
competitive factors require us to invest significantly greater resources than
anticipated in research and development or sales and marketing efforts, our
business could suffer. Accordingly, we believe that period-to-period
comparisons of our results of operations should not be relied upon as an
indication of future performance. In addition, the results of any quarterly
period are not indicative of results to be expected for a full fiscal year.
Our 3D graphics solution may not continue to be accepted by the PC market.
Our success will depend in part upon continued broad adoption of our 3D
graphics processors for high performance 3D graphics in PC applications. The
market for 3D graphics processors has been characterized by unpredictable and
sometimes rapid shifts in the popularity of products, often caused by the
publication of competitive industry benchmark results, changes in dynamic
random memory devices pricing and other changes in the total system cost of
add-in boards, as well as by severe price competition and by frequent new
technology and product introductions. Only a small number of products have
achieved broad market acceptance and such market acceptance, if achieved, is
difficult to sustain due to intense competition. Since we have no other product
lines, our business would suffer if for any reason our current or future 3D
graphics processors do not continue to achieve widespread acceptance in the PC
market. If we are unable to complete the timely development of or successfully
and cost-effectively manufacture and deliver products that meet the
requirements of the PC market, our business would be harmed.
Our integrated graphics product may not be accepted by the PC market.
We expect that integrated graphics chipset products will become an
increasing part of the lower cost segment of the PC graphics market. We
recently announced an integrated chipset product and are currently developing
future products. The integrated chipset market is dominated by Intel. If these
products are not competitive in this segment and the integrated chipset segment
continues to account for an increasing percentage of the units sold in the PC
market, our business may suffer.
We need to develop new products and to manage product transitions in order to
succeed.
Our business will depend to a significant extent on our ability to
successfully develop new products for the 3D graphics market. Our add-in board
and motherboard manufacturers and major OEM customers typically introduce new
system configurations as often as twice per year, typically based on spring and
fall design cycles. Accordingly, our existing products must have competitive
performance levels or we must timely introduce new products with such
performance characteristics in order to be included in new system
configurations. This requires that we do the following:
. anticipate the features and functionality that consumers will demand;
. incorporate those features and functionality into products that meet the
exacting design requirements of PC OEMs, or add-in board and motherboard
manufacturers and CEMs;
20
. price our products competitively; and
. introduce the products to the market within the limited window for PC OEMs
and add-in board and motherboard manufacturers.
As a result, we believe that significant expenditures for research and
development will continue to be required in the future. The success of new
product introductions will depend on several factors, including the following:
. proper new product definition;
. timely completion and introduction of new product designs;
. the ability of TSMC and any additional third-party manufacturers to
effectively manufacture our new products in a timely manner;
. the quality of any new products;
. differentiation of new products from those of our competitors;
. market acceptance of our products and our customers' products; and
. availability of adequate quantity and configurations of various types of
memory products.
Our strategy is to utilize the most advanced semiconductor process
technology appropriate for our products and available from commercial
third-party foundries. Use of advanced processes has in the past resulted in
initial yield problems. New products that we introduce may not incorporate the
features and functionality demanded by PC OEMs, add-in board and motherboard
manufacturers and consumers of 3D graphics. In addition, we may not
successfully develop or introduce new products in sufficient volumes within the
appropriate time to meet both the PC OEMs' design cycles and market demand. We
have in the past experienced delays in the development of some new products.
Our failure to successfully develop, introduce or achieve market acceptance for
new 3D graphics products would harm our business.
Our failure to identify new product opportunities or develop new products
could harm our business.
As markets for our 3D graphics processors develop and competition increases,
we anticipate that product life cycles at the high end will remain short and
average selling prices will continue to decline. In particular, we expect
average selling prices and gross margins for our 3D graphics processors to
decline as each product matures and as unit volume increases. As a result, we
will need to introduce new products and enhancements to existing products to
maintain overall average selling prices and gross margins. In order for our 3D
graphics processors to achieve high volumes, leading PC OEMs and add-in board
and motherboard manufacturers must select our 3D graphics processor for design
into their products, and then successfully complete the designs of their
products and sell them. We may be unable to successfully identify new product
opportunities or to develop and bring to market in a timely fashion any new
products. In addition, we cannot guarantee that any new products we develop
will be selected for design into PC OEMs' and add-in board and motherboard
manufacturers' products, that any new designs will be successfully completed or
that any new products will be sold. As the complexity of our products and the
manufacturing process for products increases, there is an increasing risk that
we will experience problems with the performance of products and that there
will be delays in the development, introduction or volume shipment of our
products. We may experience difficulties related to the production of current
or future products or other factors may delay the introduction or volume sale
of new products we developed. In addition, we may be unable to successfully
manage the production transition risks with respect to future products. Failure
to achieve any of the foregoing with respect to future products or product
enhancements could result in rapidly declining average selling prices, reduced
margins, and reduced demand for products or loss of market share. In addition,
technologies developed by others may render our 3D graphics products
non-competitive or obsolete or result in our holding excess inventory, any of
which would harm our business.
21
We rely on third-party vendors to supply us tools for the development of our
new products and we may be unable to obtain the tools necessary to develop
these products.
In the design and development of new products and product enhancements, we
rely on third-party software development tools. While we currently are not
dependent on any one vendor for the supply of these tools, some or all of these
tools may not be readily available in the future. For example, we have
experienced delays in the introduction of products in the past as a result of
the inability of then available software development tools to fully simulate
the complex features and functionalities of our products. The design
requirements necessary to meet consumer demands for more features and greater
functionality from 3D graphics products in the future may exceed the
capabilities of the software development tools available to us. If the software
development tools we use become unavailable or fail to produce designs that
meet consumer demands, our business could suffer.
Our industry is characterized by vigorous protection and pursuit of
intellectual property rights or positions that could result in substantial
costs to us.
The semiconductor industry is characterized by vigorous protection and
pursuit of intellectual property rights and positions, which has resulted in
protracted and expensive litigation. The 3D graphics market in particular has
been characterized recently by the aggressive pursuit of intellectual property
positions, and we expect our competitors to continue to pursue aggressive
intellectual property positions. In addition, from time to time we receive
notices alleging that we have infringed patents or other intellectual property
rights owned by third parties. We expect that, as the number of issued hardware
and software patents increases, and as competition in our markets intensifies,
the volume of intellectual property infringement claims may increase. If
infringement claims are made against us, we may seek licenses under the
claimants' patents or other intellectual property rights. However, licenses may
not be offered at all or on terms acceptable to us, particularly by
competitors. The failure to obtain a license from a third party for technology
used by us could cause us to incur substantial liabilities and to suspend the
manufacture of and sale of one or more products, which could reduce our
revenues and harm our business. Furthermore, we may initiate claims or
litigation against third parties for infringement of our proprietary rights or
to establish the validity of our proprietary rights. We have agreed to
indemnify certain customers for claims of infringement arising out of sale of
our products.
Litigation by or against us or our customers concerning infringement would
likely result in significant expense to us and divert the efforts of our
technical and management personnel, whether or not the litigation results in
a favorable determination for us.
We have in the past been subject to patent infringement suits, and we may be
subject to patent infringement suits brought by other parties in the future.
These future lawsuits could divert our resources and result in the payment of
substantial damages.
We may be unable to adequately protect our intellectual property.
We rely primarily on a combination of patents, trademarks, trade secrets,
employee and third-party nondisclosure agreements and licensing arrangements to
protect our intellectual property. As of October 31, 2001, we owned 66 issued
United States patents and 6 issued foreign patents, and have 124 United States
patent applications pending. Our issued patents have expiration dates from June
9, 2012 to December 6, 2019. As of October 31, 2001, our patents and pending
patent applications related to technology used by us in connection with our
products, including our graphics processors. Our pending patent applications
and any future applications may not be approved. In addition, any issued
patents may not provide us with competitive advantages or may be challenged by
third parties. The enforcement of patents by others may harm our ability to
conduct our business. Others may independently develop substantially equivalent
intellectual property or otherwise gain access to our trade secrets or
intellectual property. Our failure to effectively protect our intellectual
property could harm our business. We have licensed technology from third
parties for incorporation in our graphics processors, and expect to continue to
enter into license agreements for future products. These licenses may result in
royalty payments to third parties, the cross licensing of technology by us or
payment of other consideration. If these arrangements are not concluded on
commercially reasonable terms, our business could suffer.
22
Our failure to achieve one or more design wins would harm our business.
Our future success will depend in large part on achieving design wins, which
entails having our existing and future products chosen as the 3D graphics
processors for hardware components or subassemblies designed by PC OEMs and
add-in board and motherboard manufacturers. Our add-in board and motherboard
manufacturers and major OEM customers typically introduce new system
configurations as often as twice per year, generally based on spring and fall
design cycles. Accordingly, our existing products must have competitive
performance levels or we must timely introduce new products with such
performance characteristics in order to be included in new system
configurations. Our failure to achieve one or more design wins would harm our
business. The process of being qualified for inclusion in a PC OEM's product
can be lengthy and could cause us to miss a cycle in the demand of end users
for a particular product feature, which also could harm our business.
Our ability to achieve design wins also depends in part on our ability to
identify and ensure compliance with evolving industry standards. Unanticipated
changes in industry standards could render our products incompatible with
products developed by major hardware manufacturers and software developers,
including Intel and Microsoft. This would require us to invest significant time
and resources to redesign our products to ensure compliance with relevant
standards. If our products are not in compliance with prevailing industry
standards for a significant period of time, our ability to achieve design wins
could suffer.
We are dependent on the PC market and the slowdown in its growth may have a
negative impact on our business.
During the first nine months of fiscal 2002, we derived most of our revenue
from the sale of products for use in the entire desktop PC market, from
professional workstations to low-cost PCs. We expect to continue to derive most
of our revenue from the sale or license of products for use in the entire
desktop PC market in the next several years. The PC market is characterized by
rapidly changing technology, evolving industry standards, frequent new product
introductions and significant price competition. These factors result in short
product life cycles and regular reductions of average selling prices over the
life of a specific product. A reduction in sales of PCs, or a reduction in the
growth rate of PC sales, could reduce demand for our products. Moreover,
changes in demand could be large and sudden. Since PC manufacturers often build
inventories during periods of anticipated growth, they may be left with excess
inventories if growth slows or if they have incorrectly forecast product
transitions. In these cases, PC manufacturers may abruptly suspend
substantially all purchases of additional inventory from suppliers like us
until the excess inventory has been absorbed. It is possible that the recent
slowing of the economy in the U.S. and international regions, which has
negatively impacted some PC manufacturers and led to some reductions in the
demand for PCs, could lead to reductions in inventory purchases by PC
manufacturers. Any reduction in the demand for PCs generally, or for a
particular product that incorporates our 3D graphic processors, could harm our
business.
The acceptance of next generation products in business PC 3D graphics may not
continue to develop.
Our success will depend in part upon the demand for performance 3D graphics
for business PC applications. The market for performance 3D graphics in
business PCs has only recently begun to emerge and is dependent on the future
development of, and substantial end-user and OEM demand for, 3D graphics
functionality. As a result, the market for business PC 3D graphics computing
may not continue to develop or may not grow at a rate sufficient to support our
business. The development of the market for performance 3D graphics on business
PCs will in turn depend on the development and availability of a large number
of business PC software applications that support or take advantage of
performance 3D graphics capabilities. Currently, there are only a limited
number of software applications like this, most of which are games, and a
broader base of software applications may not develop in the near term or at
all. Consequently, a broad market for full function performance 3D graphics on
business PCs may not develop. Our business prospects will suffer if the market
for business PC 3D graphics fails to develop or develops more slowly than
expected.
23
We are dependent on a small number of customers and we are subject to order
and shipment uncertainties.
We have only a limited number of customers and our sales are highly
concentrated. We primarily sell our products to add-in board and motherboard
manufacturers and CEMs, which incorporate graphics products in the boards they
sell to PC OEMs and system builders. Sales to add-in board and motherboard
manufacturers and CEMs are primarily dependent on achieving design wins with
leading PC OEMs. The number of add-in board and motherboard manufacturers, CEMs
and leading PC OEMs is limited. We expect that a small number of add-in board
and motherboard manufacturers and CEMs directly, and a small number of PC OEMs
indirectly, will continue to account for a substantial portion of our revenue
for the foreseeable future. As a result, our business could be harmed by the
loss of business from PC OEMs or add-in board and motherboard manufacturers and
CEMs. In addition, revenue from add-in board and motherboard manufacturers,
CEMs and PC OEMs that have directly or indirectly accounted for significant
revenue in past periods, individually or as a group, may not continue, or may
not reach or exceed historical levels in any future period.
Our business may be harmed by instability in Asia due to the concentration
of customers who are located or have substantial operations in Asia, including
Taiwan. The People's Republic of China and Taiwan have in the past experienced
and currently are experiencing strained relations. A worsening of these
relationships or the development of hostilities between the two could result in
disruptions in Taiwan and possibly other areas of Asia, which could harm our
business. In addition, if relations between the U.S. and The People's Republic
of China become strained, our business could be adversely affected. While we
believe political instability in Asia has not adversely affected our business,
because of our reliance on companies with operations in Asia, continued
economic and political instability in Asia might harm it.
We may not be successful in producing the processors in volumes required for
the Microsoft Xbox product and, even if we do successfully produce these
processors in the volumes required, we may not achieve profit margins
consistent with those of our other products.
Our Xbox IGP and MCP are new, complicated processors. Both processors have
increased in complexity and features from what was contemplated at the time we
entered into the agreement with Microsoft. There can be no assurance that we
will be able to produce these processors in the volume necessary and within the
required time frames or that the payments for these processors will be
consistent with profit margins achieved on our other products. Finally, there
can be no assurance that the Xbox program will be commercially successful,
given the high level of competition in the game console market. If any of these
risks occur, our business may be harmed.
We may be unable to manage our growth and, as a result, may be unable to
successfully implement our strategy.
Our rapid growth has placed, and is expected to continue to place, a
significant strain on our managerial, operational and financial resources. As
of October 28, 2001, we had 1,005 employees as compared to 796 employees as of
January 28, 2001. We expect that the number of our employees will increase
substantially over the next 12 months. Our future growth, if any, will depend
on our ability to continue to implement and improve operational, financial and
management information and control systems on a timely basis, as well as our
ability to maintain effective cost controls. Further, we will be required to
manage multiple relationships with various customers and other third parties.
Our systems, procedures or controls may not be adequate to support our
operations and our management may be unable to achieve the rapid execution
necessary to successfully implement our strategy.
We are dependent on key personnel and the loss of these employees could harm
our business.
Our performance is substantially dependent on the performance of our
executive officers and key employees. None of our officers or employees is
bound by an employment agreement, and our relationships with these officers and
employees are, therefore, at will. We do not have "key person" life insurance
policies on any
24
of our employees. The loss of the services of any of our executive officers,
technical personnel or other key employees, particularly Jen-Hsun Huang, our
President and Chief Executive Officer, would harm our business. Our success
will depend on our ability to identify, hire, train and retain highly qualified
technical and managerial personnel. Our failure to attract and retain the
necessary technical and managerial personnel would harm our business.
We depend on third-party fabrications to produce our products.
We do not manufacture the semiconductor wafers used for our products and do
not own or operate a wafer fabrication facility. Our products require wafers
manufactured with state-of-the-art fabrication equipment and techniques. We
utilize TSMC to produce our semiconductor wafers and utilize independent
contractors to perform assembly, test and packaging. We depend on these
suppliers to allocate to us a portion of their manufacturing capacity
sufficient to meet our needs, to produce products of acceptable quality and at
acceptable manufacturing yields, and to deliver those products to us on a
timely basis. These manufacturers may be unable to meet our near-term or
long-term manufacturing requirements. We obtain manufacturing services on a
purchase order basis and TSMC has no obligation to provide us with any
specified minimum quantities of product. TSMC fabricates wafers for other
companies, including certain of our competitors, and could choose to prioritize
capacity for other users or reduce or eliminate deliveries to us on short
notice. Because the lead-time needed to establish a strategic relationship with
a new manufacturing partner could be several quarters, there is no readily
available alternative source of supply for any specific product. We believe
that long-term market acceptance for our products will depend on reliable
relationships with TSMC and any other manufacturers used by us to ensure
adequate product supply to respond to customer demand.
Because of our reliance on TSMC, our business may be harmed by political
instability in Taiwan, including the worsening of the strained relations
between The People's Republic of China and Taiwan, or if relations between the
U.S. and The People's Republic of China are strained due to foreign relations
events. Furthermore, any substantial disruption in our suppliers' operations,
either as a result of a natural disaster, political unrest, economic
instability, equipment failure or other cause, could harm our business.
We are dependent primarily on TSMC and we expect in the future to continue
to be dependent upon third-party manufacturers to do the following:
. produce wafers of acceptable quality and with acceptable manufacturing
yields;
. deliver those wafers to us and our independent assembly and testing
subcontractors on a timely basis; and
. allocate to us a portion of their manufacturing capacity sufficient to
meet our needs.
Our wafer requirements represent a significant portion of the total
production capacity of TSMC. Although our products are designed using TSMC's
process design rules, TSMC may be unable to achieve or maintain acceptable
yields or deliver sufficient quantities of wafers on a timely basis and/or at
an acceptable cost. Additionally, TSMC may not continue to devote resources to