United States District Court for the Central District of

California, for infringement of US Patent Nos. 6,109,892 and 6,114,785. The

underlying case is Sunonwealth v. Adda Corporation, et al, filed in the United

States District Court for the Central District on October 19, 2000. Both cases

have been consolidated. The patents are for a positioning device for a sensor

element of a miniature fan. The Company purchased these fans from Adda. Adda has

agreed to defend the Company and to pay any judgment rendered against the

Company as well as the cost of any settlement to the extent that the Company's

liability in such settlement arises from patent infringement resulting from its

purchase of products from Adda.

On August 3, 2001 the Court of Appeals for the Federal Circuit issued its

decision in a patent infringement action originally brought in 1998 by S3

Incorporated (now SONICblue Incorporated). The decision vacated the district's

court summary judgment in favor of the Company and dismissal of the action

relative to certain disputed claims and remanded the matter back to the district

court. Under a previous settlement agreement with S3, the Company agreed to pay

up to $2.0 million if S3's appeal of the district court judgment was decided in

favor of S3. The Company made a payment of $1.9 million in August 2001 to fully

satisfy its obligation under the settlement.

(10) Subsequent Event

In August 2001, the Company's Board of Directors approved a two-for-one

stock split of the Company's common stock for stockholders of record on August

28, 2001, to be effected in the form of a 100% stock dividend. The transfer

agent is expected to distribute the additional shares resulting from the stock

dividend on September 11, 2001.

ITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS

OF OPERATIONS

The following discussion contains forward-looking statements within the

meaning of Section 27A of the Securities Act of 1933 and Section 21E of the

Securities Exchange Act of 1934, which are subject to the "safe harbor" created

by those sections. These forward-looking statements include but are not limited

to: statements related to industry trends and future growth in the markets for

3D graphics processors; our product development efforts; the timing of our

introduction of new products; industry and consumer acceptance of our products;

and future profitability. These forward-looking statements involve risks and

uncertainties that could cause our actual results to differ materially from

those in the forward-looking statements. We undertake no obligation to publicly

release any revisions to the forward-looking statements or reflect events or

circumstances after the date of this document. The "Certain Business Risks"

section, among other things, should be considered in evaluating our prospects

and future financial performance.

10

Overview

We design, develop and market graphics processors and related software for

personal computers and digital entertainment platforms. We provide a

"top-to-bottom" family of award-winning performance 3D graphics processors and

GPUs that set the standard for performance, quality and features for a broad

range of desktop PCs, from professional workstations to low-cost PCs, and mobile

PCs, from performance laptops to thin-and-light notebooks. Our 3D graphics

processors are used for a wide variety of applications, including games, digital

image editing, business productivity, the Internet and industrial design. Our

graphics processors were the first to incorporate a 128-bit multi-texturing

graphics architecture designed to deliver to users of our products a highly

immersive, interactive 3D experience with compelling visual quality, realistic

imagery and motion, stunning effects and complex object and scene interaction at

real-time frame rates. The NVIDIA TNT2, TNT2 M64 and Vanta graphics processors

deliver high performance 3D and 2D graphics at affordable prices, making them

the graphics hardware of choice for a wide range of applications for both

consumer and commercial use. Our graphics processors are designed to be

architecturally compatible backward and forward between generations, giving our

original equipment manufacturer, or OEM, customers and end users a low cost of

ownership. We are recognized for developing the world's first GPU, the GeForce

256, which incorporates independent hardware transform and lighting processing

units along with a complete rendering pipeline into a single-chip architecture.

Our GPUs, the GeForce3, the GeForce2 Ultra, the GeForce2 GTS, the GeForce2 MX,

the GeForce2 Go, the NVIDIA Quadro2 Pro and the Quadro2 MXR, process hundreds of

billions of operations per second and increase the PC's ability to render

high-definition 3D scenes in real-time. Our GPU families provide superior

processing and rendering power at competitive prices and are architected to

deliver the maximum performance from industry standards such as Microsoft's

Direct3D Application Programming Interface (API) and Silicon Graphics, Inc.'s

(SGI's) OpenGL API on Windows operating systems and Linux platforms.

We recognize revenue from product sales to customers when a contract is in

place, the price is determined, shipment is made and collectability is

reasonably assured. Our policy on sales to distributors and stocking

representatives is to defer recognition of sales and related cost of sales until

the distributors and representatives resell the product. Royalty revenue is

recognized upon shipment of product by the licensee to its customers. We believe

that the software sold with our products is incidental to the product as a

whole.

Currently, all of our product sales and our arrangements with third-party

manufacturers provide for pricing and payment in U.S. dollars. We have not

engaged in any foreign currency hedging activities, although we may do so in the

future. Since we have no other product line, our business would suffer if for

any reason our graphics processors do not achieve widespread acceptance in the

PC market.

A majority of our sales have been to a limited number of customers and

sales are highly concentrated. We sell graphics processors to add-in board and

motherboard manufacturersand contract equipment manufacturers, or CEMs. These

manufacturers incorporate our processors into the boards they sell to PC OEMs,

retail outlets and systems integrators. The average selling prices for our

products, as well as our customers' products, vary by distribution channel. Our

three largest customers accounted for approximately 43% of revenues for the

second quarter of fiscal 2002 and 48% of revenues for the first half of fiscal

2002. Sales to Edom Technology Co., Ltd. accounted for 21%, sales to Celestica

accounted for 11%, and sales to Atlantic Semiconductor accounted for 11% of our

total revenue for the second quarter of fiscal 2002. For the first half of

fiscal 2002, sales to Edom accounted for 26%, sales to Celestica accounted for

10%, and sales to Atlantic Semiconductor account for 12% of our total revenue.

For the second quarter of fiscal 2001, sales to Edom accounted for 21% and sales

to Celestica accounted for 11% of our total revenue. For the first half of

fiscal 2001, sales to Edom accounted for 22% and sales to Celestica accounted

for 10% of our total revenue. The number of potential customers for our products

is limited, and we expect sales to be concentrated to a few major customers for

the foreseeable future.

As markets for our 3D graphics processors develop and competition

increases, we anticipate that product life cycles in the high end will remain

short and average selling prices will continue to decline. In

11

particular, average selling prices and gross margins are expected to decline as

each product matures. Our add-in board and motherboard manufacturers and major

OEM customers typically introduce new system configurations as often as twice

per year for the high end, typically based on spring and fall design cycles. In

order to maintain average selling prices and gross margins, our existing and new

products must achieve competitive performance levels to be designed into new

system configurations and must be produced at low costs, in sufficient volumes

and on a timely basis, especially with respect to our new products.

We currently utilize Taiwan Semiconductor Manufacturing Company, or TSMC,

to produce semiconductor wafers, and utilize independent contractors to perform

assembly, test and packaging. We depend on these suppliers to allocate to us a

portion of their manufacturing capacity sufficient to meet our needs, to produce

products of acceptable quality and at acceptable manufacturing yields, and to

deliver those products to us on a timely basis. These manufacturers may not

always be able to meet our near-term or long-term manufacturing requirements.

Yields or product performance could suffer due to difficulties associated with

adapting our technology and product design to the proprietary process technology

and design rules of a new manufacturer. The level of finished goods inventory we

maintain may fluctuate and therefore a manufacturing disruption experienced by

these manufacturers would impact the production of our products, which could

harm our business. In addition, as the complexity of our products and the

accompanying manufacturing process increases, there is an increasing risk that

we will experience problems with the performance of new products and that there

will be yield problems or other delays in the development or introduction of

these products.

Substantially all of our sales are made on the basis of purchase orders

rather than long-term agreements. As a result, we may commit resources to the

production of products without having received advance purchase commitments from

customers. Any inability to sell products to which we have devoted significant

resources could harm our business. In addition, cancellation or deferral of

product orders could result in our holding excess inventory, which could

adversely affect our profit margins and restrict our ability to fund operations.

We may build memory and component inventories during periods of anticipated

growth and in connection with selling workstation boards directly to major OEMs.

We could be subject to excess or obsolete inventories and be required to take

corresponding write-downs if growth slows or if we incorrectly forecast product

demand. A reduction in demand could negatively impact our gross margins and

financial results. Product returns or delays or difficulties in collecting

accounts receivable could result in significant charges against income, which

could harm our business.

On April 18, 2001, we completed the purchase of certain assets of 3dfx

Interactive, Inc., including patents and patent applications. Under the terms of

the Asset Purchase Agreement, the cash consideration due at the closing was

$70.0 million, less $15.0 million that was loaned to 3dfx pursuant to a Credit

Agreement dated December 15, 2000, between us and 3dfx. Pursuant to the Asset

Purchase Agreement, following the closing, we are to pay 3dfx additional

consideration in the form of stock equal to one million shares of NVIDIA common

stock, subject to 3dfx satisfying certain conditions. In addition, following the

closing, we and 3dfx filed a stipulation to dismiss with prejudice the patent

litigation between us. The litigation was dismissed on April 26, 2001, pursuant

to a judicial order. The transaction is accounted for under the purchase method

of accounting. See Note 3 of Notes to Condensed Consolidated Financial

Statements.

Results of Operations

The following table sets forth, for the periods indicated, certain items in

our condensed consolidated statements of income expressed as a percentage of

total revenue.

Three Months Ended Six Months Ended

------------------ ----------------

July 29, July 30, July 29, July 30,

2001 2000 2001 2000

---------- ---------- ---------- ----------

Revenue ......................... 100.0% 100.0% 100.0% 100.0%

Cost of revenue ................. 60.2 62.6 61.0 62.6

------ ------ ------ ------

Gross profit .................... 39.8 37.4 39.0 37.4

Operating expenses:

12

Research and development ........................ 13.0 11.8 13.0 11.9

Sales, general and administrative ............... 7.6 8.6 7.7 8.4

Amortization of goodwill and purchased

intangible assets ............................... 1.5 -- 0.9 --

Acquisition related charges ..................... 0.3 -- 2.0 --

------ ------ ------ ------

Total operating expenses ................... 22.4 20.4 23.6 20.3

------ ------ ------ ------

Operating income ............................ 17.4 17.0 15.4 17.1

Interest and other income, net ...................... 1.0 2.4 1.6 1.7

------ ------ ------ ------

Income before income tax expense .................... 18.4 19.4 17.0 18.8

Income tax expense .................................. 5.5 6.2 5.1 6.0

------ ------ ------ ------

Net income .................................. 12.9% 13.2% 11.9% 12.8%

====== ====== ====== ======

Three months and six months ended July 29, 2001, and July 30, 2000.

Revenue

Revenue increased 53% to $260.3 million in the second quarter ended July

29, 2001 from $170.4 million in the second quarter ended July 30, 2000. Revenue

of $501.2 million for the first half of fiscal 2002 grew 57% over the first half

of fiscal 2001. The growth was primarily the result of increased sales of our

graphics processors and the strong demand for new products at higher unit

average selling prices. Revenue from sales outside of the United States

accounted for 89% of total revenue for the second quarter ended July 29, 2001

and 91% of total revenue for the first half of fiscal 2002. Revenue from sales

outside of the U.S. represented 86% of total revenue in the second quarter ended

July 30, 2000 and 88% in the first half of fiscal 2001. This increase in revenue

from sales outside of the United States is primarily attributable to (i)

expanded use of CEMs, add-in board and motherboard manufacturers located outside

of the United States, and (ii) increased demand for our products in the Asia

Pacific region. Revenue by geographical region is allocated to individual

countries based on the location to which the products are initially billed. The

portion of revenue derived from foreign CEMs and add-in board and motherboard

manufacturers that are attributable to end customers in the United States is not

separately disclosed. Although we achieved substantial growth in product revenue

for the first half of 2002 from the same period in fiscal 2001, we do not expect

to sustain this rate of growth in future periods. In addition, we expect that

the average selling prices of our products will decline over the lives of the

products. The declines in average selling prices of 3D graphics processors

generally may also accelerate as the market develops and competition increases.

Gross Profit

Gross profit consists of total revenue net of allowances less cost of

revenue. Cost of revenue consists primarily of the costs of semiconductors

purchased from contract manufacturers (including assembly, test and packaging),

manufacturing support costs (labor and overhead associated with such purchases),

inventory provisions and shipping costs. Our gross profit margin can vary in any

period depending on the mix of types of graphics processors sold. Gross profit

increased 63% from the second quarter of fiscal 2001 to the same period of

fiscal 2002, and 64% from the first half of fiscal 2001 to the same period of

fiscal 2002, primarily due to significant increases in unit shipments and the

favorable impact of the higher margin GeForce graphics processors, partially

offset by declining profit margins in our older product families. Although we

achieved substantial growth in gross profit and margin from the first half of

fiscal 2001 to the same period of fiscal 2002, we do not expect to sustain these

rates of growth in future periods.

Operating Expenses

Research and Development. Research and development expenses consist of

salaries and benefits, cost of development tools and software, costs of

prototypes of new products and consultant costs. Research and development

expenses increased by 68% from the second quarter of fiscal 2001 to the same

period of fiscal 2002, and 71% from the first half of fiscal 2001 to the first

half of fiscal 2002, primarily due to new employees from 3dfx, a move to new

headquarters, the addition of personnel and related engineering costs to support

our next generation's products, such as depreciation charges incurred on capital

expenditures and

13

software license and maintenance fees. We anticipate that we will continue to

devote substantial resources to research and development, and we expect these

expenses to increase in absolute dollars in the foreseeable future due to

increased complexity and the number of products under development. Research and

development expenses are likely to fluctuate from time to time to the extent we

make periodic incremental investments in research and development and these

investments may be independent of our level of revenues.

Sales, General and Administrative. Sales, general and administrative

expenses consist primarily of salaries, commissions and bonuses, promotional

tradeshow and advertising expenses, travel and entertainment expenses and legal

and accounting expenses. Sales, general and administrative expenses increased by

36% from the second quarter of fiscal 2001 to the same period of fiscal 2002,

and 44% from the first half of fiscal 2001 to the first half of fiscal 2002,

primarily due to costs associated with additional personnel and commissions and

bonuses on sales of the GeForce families of graphic processors. We expect sales

and marketing expenses to continue to increase in absolute dollars as we

continue to expand our operations and our sales. General and administrative

expenses are also likely to increase in absolute dollars as we continue to

expand our operations. However, we do not expect significant changes in these

expenses as a percentage of revenue in future periods.

Amortization of goodwill and purchased intangible assets. Amortization of

goodwill and purchased intangible assets consist primarily of goodwill and

intangible assets from the asset purchase of 3dfx. The initial allocation of the

purchase price was to (i) workforce in place, amortized over two years, (ii)

patents and trademarks, amortized over five years and (iii) goodwill, amortized

over five years. The final allocation will depend upon the additional

consideration given to 3dfx, subject to 3dfx satisfying certain conditions.

Consequently, the actual allocation of the purchase price could differ from that

presented in Note 3 of Notes to Condensed Consolidated Financial Statements.

Acquisition related charges. Acquisition related charges are attributable

to expenses related to the acquisition of 3dfx. These charges primarily

consisted of bonuses for employees.

Interest and Other Income (Expense), Net

Interest expense increased for the second quarter and the first half of

fiscal 2002 compared to the same periods in fiscal 2001 due to the issuance of

$300.0 million of convertible debt in October 2000. Interest income increased

63% during the second quarter and the first half of fiscal 2002 from the same

periods in fiscal 2001 due to higher average cash balances as a result of the

$200.0 million advance received from Microsoft in connection with our agreement

with Microsoft and the receipt of $387.4 million from our combined convertible

debt and common stock offerings which closed in October 2000.

Income Taxes

Income taxes as a percentage of pretax income was 30% for the first half

of fiscal 2002 and 32% for the same period in fiscal 2001. Foreign income which

is taxed at rates lower than the United States statutory rates contributed to

the lower tax rate for the first half of fiscal 2002.

Stock-Based Compensation

With respect to stock options granted to employees, we recorded deferred

compensation of $4.3 million in 1997 and $361,000 in the one month ended January

31, 1998. These amounts are being amortized over the vesting period of the

individual options, generally four years. We amortized approximately $6,000 in

the first half of fiscal 2002 and $85,000 in the first half of fiscal 2001.

Deferred compensation was fully amortized during the first half of fiscal 2002.

Liquidity and Capital Resources

As of July 29, 2001, we had $681.1 million in cash and cash equivalents, an

increase of $6.8 million from the end of fiscal 2001. We historically have held

our cash balances in cash equivalents such as money

14

market funds or as cash. We place the money market funds with high-quality

financial institutions and limit the amount of exposure with any one financial

institution. We had $159.2 million of non-cancelable manufacturing commitments

outstanding at July 29, 2001.

Operating activities generated cash of $93.8 million during the first half

of fiscal 2002 and $34.7 million during the first half of fiscal 2001. The

increase from the first half of fiscal 2001 to the same period in fiscal 2002

was due to a substantial increase in net income and changes in operating assets

and liabilities. Our accounts receivable are highly concentrated. At July 29,

2001, the three largest customers accounted for approximately 37% of accounts

receivable. Although we have not experienced any significant bad debt write-offs

to date, we may be required to write off bad debt in the future, which could

harm our business.

To date, our investing activities have consisted primarily of acquisitions

of businesses and purchases of property and equipment and leasehold improvements

for our new facility under construction. We incurred acquisition costs of $64.1

million during the first half of fiscal 2002, primarily due to the closing of

3dfx asset purchase. There were no acquisitions during the same period a year

ago. Our capital expenditures increased from $15.1 million in the first half of

fiscal 2001 to $55.6 million in the first half of fiscal 2002. The increase was

primarily attributable to the construction of our new facility as well as for

purchases of computer and emulation equipment to support increased research and

development activities. We expect capital expenditures to increase as we further

expand research and development initiatives and as our employee base grows. The

timing and amount of future capital expenditures will depend primarily on our

future growth. We expect to spend approximately $70.0 million to $80.0 million

for capital expenditures in fiscal 2002, primarily for software licenses,

emulation equipment, purchase of computer and engineering workstations, future

phases of enterprise resource planning system implementation and tenant and

leasehold improvements in our new headquarters facility.

In April 2000, we entered into leases for our new headquarters complex in

Santa Clara, California. Our new complex will comprise four buildings,

representing approximately 500,000 total square feet. The first phase of two

buildings consisting of approximately 250,000 square feet was completed in June

2001, and the second phase of one building consisting of approximately 125,000

square feet was completed in July 2001. We expect the last phase consisting of

approximately 125,000 square feet to be completed in March 2002. As of August

31, 2001, restricted cash related to the construction decreased to $7.1 million

from $28.1 million at July 29, 2001. The leases expire in 2012 and include two

seven-year renewals at our option. The future minimum lease payments under these

operating leases total approximately $224.8 million over the terms of the

leases. We currently are in the process of locating a subtenant for our former

office space and a subtenant for one of the buildings that will comprise part of

our new office complex. We may be unable to secure subtenants for both spaces

due to the recent decrease in demand for commercial rental space in Santa Clara.

See "Certain Business Risks - We recently moved into new headquarters. If we are

unable to sublease our excess space, we will have increased operating expenses

which may have a negative impact on our net income."

Financing activities provided cash of $36.2 million in the first half of

fiscal 2002 compared to $208.0 million in the same period of fiscal 2001. On

March 5, 2000, we entered into an agreement with Microsoft in which we agreed to

develop and sell graphics chips and to license certain technology to Microsoft

and its licensees for use in a product under development by Microsoft. In April

2000, Microsoft paid us $200.0 million as an advance against graphics chip

purchases. Microsoft may terminate the agreement at any time. If termination

occurs prior to offset in full of the advance payments, we would be required to

return to Microsoft up to $100.0 million of the prepayment and to convert the

remainder into shares of our preferred stock a 30% premium to the 30-day average

trading price of our common stock preceding Microsoft's termination of the

agreement. In July 2001, we began to ship production units to Microsoft, and the

$200.0 million advance was drawn down in relation to the shipments made during

the quarter.

We believe that our existing cash balances and anticipated cash flows from

operations will be sufficient to meet our operating and capital requirements for

at least the next 12 months. However, there is no assurance that we will not

need to raise additional equity or debt financing within this time frame.

Additional financing may not be available on favorable terms or at all and may

be dilutive to our then-current stockholders. We also may require additional

capital for other purposes not presently contemplated.

15

If we are unable to obtain sufficient capital, we could be required to curtail

capital equipment purchases or research and development expenditures, which

could harm our business.

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Interest Rate Risk

The primary objective of our investment activities is to preserve principal

while at the same time maximizing the income we receive from the investments

without significantly increasing risk. To minimize potential loss arising from

adverse changes in interest rates, we maintain a portfolio of cash and cash

equivalents primarily in highly rated domestic money market funds. In general,

money market funds are not subject to market risk because the interest paid on

such funds fluctuates with the prevailing interest rate. Our convertible

subordinated notes are at a fixed interest rate of 4 3/4% and are not subject to

interest rate fluctuations.

Exchange Rate Risk

We consider our exposure to foreign exchange rate fluctuations to be

minimal. Currently, sales and arrangements with third-party manufacturers

provide for pricing and payment in U.S. dollars, and therefore are not subject

to exchange rate fluctuations. To date, we have not engaged in any currency

hedging activities, although we may do so in the future. Fluctuations in

currency exchange rates could harm our business in the future.

Certain Business Risks

In addition to the risks discussed in "Management's Discussion and Analysis

of Financial Condition and Results of Operations," our business is subject to

the risks set forth below.

Our operating results are unpredictable and may fluctuate.

Many of our revenue components fluctuate and are difficult to predict, and

our operating expenses are largely independent of revenue in any particular

period. It is therefore difficult for us to accurately forecast revenue and

profits or losses. As a result, it is possible that in some quarters our

operating results could be below the expectations of securities analysts and

investors, which could cause the trading price of our common stock to decline,

perhaps substantially. We believe that our quarterly and annual results of

operations will be affected by a variety of factors that could adversely affect

our revenue, gross profit and results of operations.

Factors that have affected our results of operations in the past, and could

affect our results of operations in the future, include the following:

. demand and market acceptance for our products and/or our customers'

products;

. the successful development and volume production of next-generation

products;

. new product announcements or product introductions by our competitors;

. our ability to introduce new products in accordance with OEM design

requirements and design cycles;

. changes in the timing of product orders due to unexpected delays in

the introduction of our customers' products;

. fluctuations in the availability of manufacturing capacity or

manufacturing yields;

. declines in spending by corporations and consumers related to

perceptions regarding an economic downturn in the U.S. and

international regions;

16

. competitive pressures resulting in lower than expected average selling

prices;

. rates of return in excess of that forecasted or expected due to

quality issues;

. the rescheduling of shipments or cancellation of customer orders;

. the loss of a key customer or the termination of a strategic

relationship;

. seasonal fluctuations associated with the PC market;

. substantial disruption in our suppliers' operations, either as a

result of a natural disaster, equipment failure or other cause;

. supply constraints for and changes in the cost of the other components

incorporated into our customers' products, including memory devices;

. our ability to reduce the manufacturing costs of our products;

. legal and other costs related to defending intellectual property;

. bad debt write-offs;

. costs associated with the repair and replacement of defective

products;

. unexpected inventory write-downs; and

. introductions of enabling technologies to keep pace with faster

generations of processors and controllers.

Any one or more of the factors discussed above could prevent us from

achieving our expected future revenue or net income.

Because most operating expenses are relatively fixed in the short term, we

may be unable to adjust spending sufficiently in a timely manner to compensate

for any unexpected sales shortfall. We may be required to reduce prices in

response to competition or to pursue new market opportunities. If new

competitors, technological advances by existing competitors or other competitive

factors require us to invest significantly greater resources than anticipated in

research and development or sales and marketing efforts, our business could

suffer. Accordingly, we believe that period-to-period comparisons of our results

of operations should not be relied upon as an indication of future performance.

In addition, the results of any quarterly period are not indicative of results

to be expected for a full fiscal year.

Our 3D graphics solution may not continue to be accepted by the PC market.

Our success will depend in part upon continued broad adoption of our 3D

graphics processors for high performance 3D graphics in PC applications. The

market for 3D graphics processors has been characterized by unpredictable and

sometimes rapid shifts in the popularity of products, often caused by the

publication of competitive industry benchmark results, changes in dynamic random

memory devices pricing and other changes in the total system cost of add-in

boards, as well as by severe price competition and by frequent new technology

and product introductions. Only a small number of products have achieved broad

market acceptance and such market acceptance, if achieved, is difficult to

sustain due to intense competition. Since we have no other product lines, our

business would suffer if for any reason our current or future 3D graphics

processors do not continue to achieve widespread acceptance in the PC market. If

we are unable to complete the timely development of or successfully and

cost-effectively manufacture and deliver products that meet the requirements of

the PC market, our business would be harmed.

Our integrated graphics product may not be accepted by the PC market.

We expect that integrated graphics chipset products will become an

increasing part of the lower cost segment of the PC graphics market. We recently

announced an integrated chipset product and are currently developing future

products. If these products are not competitive in this segment and the

integrated chipset

17

segment continues to account for an increasing percentage of the units sold in

the PC market, our business may suffer.

We need to develop new products and to manage product transitions in order

to succeed.

Our business will depend to a significant extent on our ability to

successfully develop new products for the 3D graphics market. Our add-in board

and motherboard manufacturers and major OEM customers typically introduce new

system configurations as often as twice per year, typically based on spring and

fall design cycles. Accordingly, our existing products must have competitive

performance levels or we must timely introduce new products with such

performance characteristics in order to be included in new system

configurations. This requires that we do the following:

. anticipate the features and functionality that consumers will demand;

. incorporate those features and functionality into products that meet the

exacting design requirements of PC OEMs, or add-in board and motherboard

manufacturers and CEMs;

. price our products competitively; and

. introduce the products to the market within the limited window for PC

OEMs, and add-in board and motherboard manufacturers.

As a result, we believe that significant expenditures for research and

development will continue to be required in the future. The success of new

product introductions will depend on several factors, including the following:

. proper new product definition;

. timely completion and introduction of new product designs;

. the ability of TSMC, our primary manufacturer, and any additional

third-party manufacturers to effectively manufacture our new products

in a timely manner;

. the quality of any new products;

. differentiation of new products from those of our competitors;

. market acceptance of our products and our customers' products; and

. availability of adequate quantity and configurations of various types of

memory products.

Our strategy is to utilize the most advanced semiconductor process

technology appropriate for our products and available from commercial

third-party foundries. Use of advanced processes has in the past resulted in

initial yield problems. New products that we introduce may not incorporate the

features and functionality demanded by PC OEMs, add-in board and motherboard

manufacturers and consumers of 3D graphics. In addition, we may not successfully

develop or introduce new products in sufficient volumes within the appropriate

time to meet both the PC OEMs' design cycles and market demand. We have in the

past experienced delays in the development of some new products. Our failure to

successfully develop, introduce or achieve market acceptance for new 3D graphics

products would harm our business.

Our failure to identify new product opportunities or develop new products

could harm our business.

As markets for our 3D graphics processors develop and competition

increases, we anticipate that product life cycles at the high end will remain

short and average selling prices will continue to decline. In particular, we

expect average selling prices and gross margins for our 3D graphics processors

to decline as each product matures and as unit volume increases. As a result, we

will need to introduce new products and enhancements to existing products to

maintain overall average selling prices and gross margins. In order for our 3D

graphics processors to achieve high volumes, leading PC OEMs and add-in board

and motherboard manufacturers must select our 3D graphics processor for design

into their products, and then successfully complete the designs of their

products and sell them. We may be unable to successfully

18

identify new product opportunities or to develop and bring to market in a timely

fashion any new products. In addition, we cannot guarantee that any new products

we develop will be selected for design into PC OEMs' and add-in board and

motherboard manufacturers' products, that any new designs will be successfully

completed or that any new products will be sold. As the complexity of our

products and the manufacturing process for products increases, there is an

increasing risk that we will experience problems with the performance of

products and that there will be delays in the development, introduction or

volume shipment of our products. We may experience difficulties related to the

production of current or future products or other factors may delay the

introduction or volume sale of new products we developed. In addition, we may be

unable to successfully manage the production transition risks with respect to

future products. Failure to achieve any of the foregoing with respect to future

products or product enhancements could result in rapidly declining average

selling prices, reduced margins, and reduced demand for products or loss of

market share. In addition, technologies developed by others may render our 3D

graphics products non-competitive or obsolete or result in our holding excess

inventory, either of which would harm our business.

We rely on third-party vendors to supply us tools for the development of

our new products and we may be unable to obtain the tools necessary to develop

these products.

In the design and development of new products and product enhancements, we

rely on third-party software development tools. While we currently are not

dependent on any one vendor for the supply of these tools, some or all of these

tools may not be readily available in the future. For example, we have

experienced delays in the introduction of products in the past as a result of

the inability of then available software development tools to fully simulate the

complex features and functionalities of our products. The design requirements

necessary to meet consumer demands for more features and greater functionality

from 3D graphics products in the future may exceed the capabilities of the

software development tools available to us. If the software development tools we

use become unavailable or fail to produce designs that meet consumer demands,

our business could suffer.

Our industry is characterized by vigorous protection and pursuit of

intellectual property rights or positions that could result in substantial costs

to us.

The semiconductor industry is characterized by vigorous protection and

pursuit of intellectual property rights or positions, which has resulted in

protracted and expensive litigation. The 3D graphics market in particular has

been characterized recently by the aggressive pursuit of intellectual property

positions, and we expect our competitors to continue to pursue aggressive

intellectual property positions. In addition, from time to time we receive

notices alleging that we have infringed patents or other intellectual property

rights owned by third parties. We expect that, as the number of issued hardware

and software patents increases, and as competition in our markets intensifies,

the volume of intellectual property infringement claims may increase. If

infringement claims are made against us, we may seek licenses under the

claimants' patents or other intellectual property rights. However, licenses may

not be offered at all or on terms acceptable to us. The failure to obtain a

license from a third party for technology used by us could cause us to incur

substantial liabilities and to suspend the manufacture of products. Furthermore,

we may initiate claims or litigation against third parties for infringement of

our proprietary rights or to establish the validity of our proprietary rights.

We have agreed to indemnify certain customers for claims of infringement arising

out of sale of our products.

Litigation by or against us or our customers concerning infringement would

likely result in significant expense to us and divert the efforts of our

technical and management personnel, whether or not the litigation results in a

favorable determination for us.

We have in the past been subject to patent infringement suits, and we may

be subject to patent infringement suits brought by other parties in the future.

These future lawsuits could divert our resources and result in the payment of

substantial damages.

19

We may be unable to adequately protect our intellectual property.

We rely primarily on a combination of patents, trademarks, trade secrets,

employee and third-party nondisclosure agreements and licensing arrangements to

protect our intellectual property. As of August 28, 2001, we owned 52 issued

United States patents and 6 issued foreign patents, and have 104 United States

patent applications pending. Our issued patents have expiration dates from June

9, 2012 to December 6, 2019. As of August 28, 2001, our issued patents and

pending patent applications related to technology developed by us in connection

with the development of our products, including our 3D graphics processors. Our

pending patent applications and any future applications may not be approved. In

addition, any issued patents may not provide us with competitive advantages or

may be challenged by third parties. The enforcement of patents by others may

harm our ability to conduct our business. Others may independently develop

substantially equivalent intellectual property or otherwise gain access to our

trade secrets or intellectual property. Our failure to effectively protect our

intellectual property could harm our business. We have licensed technology from

third parties for incorporation in our graphics processors, and expect to

continue to enter into license agreements for future products. These licenses

may result in royalty payments to third parties, the cross licensing of

technology by us or payment of other consideration. If these arrangements are

not concluded on commercially reasonable terms, our business could suffer.

Our failure to achieve one or more design wins would harm our business.

Our future success will depend in large part on achieving design wins,

which entails having our existing and future products chosen as the 3D graphics

processors for hardware components or subassemblies designed by PC OEMs and

add-in board and motherboard manufacturers. Our add-in board and motherboard

manufacturers and major OEM customers typically introduce new system

configurations as often as twice per year, generally based on spring and fall

design cycles. Accordingly, our existing products must have competitive

performance levels or we must timely introduce new products with such

performance characteristics in order to be included in new system

configurations. Our failure to achieve one or more design wins would harm our

business. The process of being qualified for inclusion in a PC OEM's product can

be lengthy and could cause us to miss a cycle in the demand of end users for a

particular product feature, which also could harm our business.

Our ability to achieve design wins also depends in part on our ability to

identify and ensure compliance with evolving industry standards. Unanticipated

changes in industry standards could render our products incompatible with

products developed by major hardware manufacturers and software developers,

including Intel and Microsoft. This would require us to invest significant time

and resources to redesign our products to ensure compliance with relevant

standards. If our products are not in compliance with prevailing industry

standards for a significant period of time, our ability to achieve design wins

could suffer.

We are dependent on the PC market and the slowdown in its growth may have a

negative impact on our business.

During the first half of fiscal 2002, we derived most of our revenue from

the sale of products for use in the entire desktop PC market, from professional

workstations to low-cost PCs. We expect to continue to derive most of our

revenue from the sale or license of products for use in the entire desktop PC

market in the next several years. The PC market is characterized by rapidly

changing technology, evolving industry standards, frequent new product

introductions and significant price competition. These factors result in short

product life cycles and regular reductions of average selling prices over the

life of a specific product. A reduction in sales of PCs, or a reduction in the

growth rate of PC sales, could reduce demand for our products. Moreover, changes

in demand could be large and sudden. Since PC manufacturers often build

inventories during periods of anticipated growth, they may be left with excess

inventories if growth slows or if they have incorrectly forecast product

transitions. In these cases, PC manufacturers may abruptly suspend substantially

all purchases of additional inventory from suppliers like us until the excess

inventory has been absorbed. It is possible that the recent slowing of the

economy in the U.S. and international regions, which has negatively impacted

some PC manufacturers and led to some reductions in the demand for PCs, could

lead to reductions in inventory purchases by PC manufacturers. Any reduction in

the

20

demand for PCs generally, or for a particular product that incorporates our 3D

graphic processors, could harm our business.

The acceptance of next generation products in business PC 3D graphics may

not continue to develop.

Our success will depend in part upon the demand for performance 3D graphics

for business PC applications. The market for performance 3D graphics on business

PCs has only recently begun to emerge and is dependent on the future development

of, and substantial end-user and OEM demand for, 3D graphics functionality. As a

result, the market for business PC 3D graphics computing may not continue to

develop or may not grow at a rate sufficient to support our business. The

development of the market for performance 3D graphics on business PCs will in

turn depend on the development and availability of a large number of business PC

software applications that support or take advantage of performance 3D graphics

capabilities. Currently there are only a limited number of software applications

like this, most of which are games, and a broader base of software applications

may not develop in the near term or at all. Consequently, a broad market for

full function performance 3D graphics on business PCs may not develop. Our

business prospects will suffer if the market for business PC 3D graphics fails

to develop or develops more slowly than expected.

We are dependent on a small number of customers and we are subject to order

and shipment uncertainties.

We have only a limited number of customers and our sales are highly

concentrated. We primarily sell our products to add-in board and motherboard

manufacturers and CEMs, which incorporate graphics products in the boards they

sell to PC OEMs and system builders. Sales to add-in board and motherboard

manufacturers and CEMs are primarily dependent on achieving design wins with

leading PC OEMs. The number of add-in board and motherboard manufacturers, CEMs

and leading PC OEMs is limited. We expect that a small number of add-in board

and motherboard manufacturers and CEMs directly, and a small number of PC OEMs

indirectly, will continue to account for a substantial portion of our revenue

for the foreseeable future. As a result, our business could be harmed by the

loss of business from PC OEMs or add-in board and motherboard manufacturers and

CEMs. In addition, revenue from add-in board and motherboard manufacturers, CEMs

and PC OEMs that have directly or indirectly accounted for significant revenue

in past periods, individually or as a group, may not continue, or may not reach

or exceed historical levels in any future period.

Our business may be harmed by instability in Asia due to the concentration

of customers who are located or have substantial operations in Asia, including

Taiwan. The People's Republic of China and Taiwan have in the past experienced

and currently are experiencing strained relations. A worsening of these

relations or the development of hostilities between the two could result in

disruptions in Taiwan and possibly other areas of Asia, which could harm our

business. In addition, if foreign relation matters strain the relationship

between the U.S. and The People's Republic of China, situations in Asia could

remain unstable. While we believe political instability in Asia has not

adversely affected our business, because of our reliance on companies with

operations in Asia, continued economic and political instability in Asia might

harm it.

We may be unable to manage our growth and, as a result, may be unable to

successfully implement our strategy.

Our rapid growth has placed, and is expected to continue to place, a

significant strain on our managerial, operational and financial resources. As of

July 29, 2001, we had 907 employees as compared to 796 employees as of January

28, 2001. We expect that the number of our employees will increase substantially

over the next 12 months. Our future growth, if any, will depend on our ability

to continue to implement and improve operational, financial and management

information and control systems on a

21

timely basis, as well as our ability to maintain effective cost controls.

Further, we will be required to manage multiple relationships with various

customers and other third parties. Our systems, procedures or controls may not

be adequate to support our operations and our management may be unable to

achieve the rapid execution necessary to successfully implement our strategy.

We are dependent on key personnel and the loss of these employees could

harm our business.

Our performance will be substantially dependent on the performance of our

executive officers and key employees. None of our officers or employees is bound

by an employment agreement, and our relationships with these officers and

employees are, therefore, at will. We do not have "key person" life insurance

policies on any of our employees. The loss of the services of any of our

executive officers, technical personnel or other key employees, particularly

Jen-Hsun Huang, our President and Chief Executive Officer, would harm our

business. Our success will depend on our ability to identify, hire, train and

retain highly qualified technical and managerial personnel. Our failure to

attract and retain the necessary technical and managerial personnel would harm

our business.

We depend on third-party fabrications to produce our products.

We do not manufacture the semiconductor wafers used for our products and do

not own or operate a wafer fabrication facility. Our products require wafers

manufactured with state-of-the-art fabrication equipment and techniques. We

utilize TSMC to produce our semiconductor wafers and utilize independent

contractors to perform assembly, test and packaging. We depend on these

suppliers to allocate to us a portion of their manufacturing capacity sufficient

to meet our needs, to produce products of acceptable quality and at acceptable

manufacturing yields, and to deliver those products to us on a timely basis.

These manufacturers may be unable to meet our near-term or long-term

manufacturing requirements. We obtain manufacturing services on a purchase order

basis and TSMC has no obligation to provide us with any specified minimum

quantities of product. TSMC fabricates wafers for other companies, including

certain of our competitors, and could choose to prioritize capacity for other

users or reduce or eliminate deliveries to us on short notice. Because the

lead-time needed to establish a strategic relationship with a new manufacturing

partner could be several quarters, there is no readily available alternative

source of supply for any specific product. We believe that long-term market

acceptance for our products will depend on reliable relationships with TSMC and

any other manufacturers used by us to ensure adequate product supply to respond

to customer demand.

Because of our reliance on TSMC, our business may be harmed by political

instability in Taiwan, including the worsening of the strained relations between

The People's Republic of China and Taiwan, or if relations between the U.S. and

The People's Republic of China are strained due to foreign relations events.

Furthermore, any substantial disruption in our suppliers' operations, either as

a result of a natural disaster, political unrest, economic instability,

equipment failure or other cause, could harm our business.

We are dependent primarily on TSMC and we expect in the future to continue

to be dependent upon third-party manufacturers to do the following:

. produce wafers of acceptable quality and with acceptable manufacturing

yields;

. deliver those wafers to us and our independent assembly and testing

subcontractors on a timely basis; and

. allocate to us a portion of their manufacturing capacity sufficient to

meet our needs.

Our wafer requirements represent a significant portion of the total

production capacity of TSMC. Although our products are designed using TSMC's

process design rules, TSMC may be unable to achieve or maintain acceptable

yields or deliver sufficient quantities of wafers on a timely basis and/or at an

acceptable cost. Additionally, TSMC may not continue to devote resources to the

production of our products, or to advance the process design technologies on

which the manufacturing of our products are based. Any difficulties like these

would harm our business.

22

Failure to achieve expected manufacturing yields for both or either

existing or new products would reduce our product supply and harm our business.

Semiconductor manufacturing yields are a function both of product design,

which is developed largely by us, and process technology, which typically is

proprietary to the manufacturer. Since low yields may result from either design

or process technology failures, yield problems may not be effectively determined

or resolved until an actual product exists that can be analyzed and tested to

identify process sensitivities relating to the design rules that are used. As a

result, yield problems may not be identified until well into the production

process, and resolution of yield problems would require cooperation by and

communication between us and the manufacturer.